10Pcs L298N Module Dual H Bridge Stepper Motor Driver Board Modulessmart Car Fz0407

10Pcs L298N Module Dual H Bridge Stepper Motor Driver Board Modulessmart Car Fz0407

Price Monitor

Price Type
Desired Price$
Your Email
Sign up for price drop alerts
We are the leading aliexpress shopping assistant help you buy factory direct goods at unbeatable price.
Product prices and availability are accurate as of time indicated and are subject to change.

Price History

Product Details

  • ConditionNew
  • Model NumberL298N Module Dual H Bridge Stepper Motor Driver
  • TypeL298N Module
  • RelatedStepper Motor Driver

Product Description

+++ Welcome to Mega +++ If you buy more quantity, Please contact us Basic attributes
Module name
Dual H-bridge motor driver module
Operating mode
H-bridge driver (dual)
Master chip
L298N
Packing
9 boxed shipments
Logic voltage
5V
Drive voltage
5V-35V
Logic Current
0mA-36mA
Drive current
2A (MAX single bridge)
Storage Temperature
-20 to 135 Maximum Power
25W
Weight
30g
External dimensions
43 * 43 * 27mm
Product Features:
This module uses ST\'s L298N chip as the main driver, driving ability, low heat, strong anti-interference ability.
This module can use the built-in 78M05 to take power by driving the power section, but in order to avoid damage to the regulator chip, when use is greater than the drive voltage of 12V, use an external 5V logic supply.
The module uses a large-capacity filter capacitors, drain diode can improve reliability.
The cargo module audience, photographed you, thank you. Drive modules use Tips
Driver module range of applications

The L298N is the ST Company production of a high-voltage, high-current motor driver chips. The chip uses a 15-pin package. The main features are: high operating voltage, the maximum operating voltage of up to 46V; Output current instantaneous peak current up to 3A continuous operating current of 2A; rated power of 25W. Contains two H-bridge high voltage and high current full-bridge driver can be used to drive a DC motor and stepper motor, relay coil inductive load; using standard logic level signal control; having two enable control end allow or prohibit the work has a logic device power supply input terminal, in the case regardless of the input signal affect the internal logic circuit portion to operate at a low voltage; can be an external sense resistor, the amount of change in feedback to the control circuit. The L298N chip drive motor, the chip can drive two-phase stepper motors or four-phase stepper motor can drive two DC motors.
Description / Note
Port Function Chart

Circuit schematic diagram

This module integrates a built-in 5V power supply. When you drive voltage of 7V-35V can onboard 5V logic supply, do not input voltage when using onboard 5V power supply, the +5 V power supply interface, but leads to 5V voltage for external use
When ENA so IN1 IN2 control OUT1 OUT2
When ENB so IN3 IN4 control OUT3 OUT4
Application examples
1: drive stepper motor
Drive ordinary 4-wire 2-phase motor connection, as shown
Enable ENA ENB
From IN1 - IN4 enter the following drive timing, you can control the speed and direction of the stepper motor

2: drive DC motor
This module is a 2-channel H-bridge driver can drive two motors at the same time, the connection shown in Figure shown
So can ENA ENB
Respectively, from the speed and direction of the input to the PWM signal driving the motor 1 on IN1 IN2
The PWM signal of the speed and direction of the drive motor 2 can be respectively from IN3 IN4 input
Signal as shown

 10pcs L298N Module Dual H Bridge Stepper Motor Driver Board ModulesSmart Car FZ0407

Banktransfer
1) We accept Alipay, West Union, TT. All major credit cards are accepted through secure payment processor ESCROW. 2) Payment must be made within 3 days of order.
3) If you can\'t checkout immediately after auction close, please wait for a few minutes and retry Payments must be completed within 3 days.

 10pcs L298N Module Dual H Bridge Stepper Motor Driver Board ModulesSmart Car FZ0407

1. WORLDWIDE SHIPPING. (Except some countries and APO/FPO)
2. Orders processed timely after the payment verification.
3. We only ship to confirmed order addresses. Your order address MUST MATCH your Shipping address.
4. The images shown are not the actual item and are for your reference only.
5. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season.
6. If you have not received your shipment within 30 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
7. Due to stock status and time differences, we will choose to ship your item from our first available warehouse for fast delivery.
8. Delivery Time:

 10pcs L298N Module Dual H Bridge Stepper Motor Driver Board ModulesSmart Car FZ0407

1. You have 7 days to contact us and 30 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and WE WILL NOT ISSUE YOU A REFUND OR REPLACEMENT. There are NO EXCEPTIONS! Shipping cost is bear by both seller and buyer in half.
2. All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number, specific reason for the return, and your po#.
3. We will refund YOUR FULL WINNING BID AMOUNT, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER BOTH Buyer and Seller cancel the transaction from aliexpress. OR, you may choose to have a replacement.
4. We will bear all the shipping cost if the product(s) is (are) not as advertised.
 10pcs L298N Module Dual H Bridge Stepper Motor Driver Board ModulesSmart Car FZ0407

1. 12 months Manufacturer`s limited Warranty for defective items (excluding items damaged and/or misused after receipt). Accessories come with a 3-month warranty.
2. Defective items MUST BE reported and returned within the warranty period (and in the original packaging, if possible). You must tell us what the defect is and give us your order number. WE DO NOT REPAIR OR REPLACE ITEMS WITH AN EXPIRED WARRANTY.
You agree to all of the above-listed policies upon ordering on aliexpress!

 10pcs L298N Module Dual H Bridge Stepper Motor Driver Board ModulesSmart Car FZ0407

We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
It is impossible to address issues if we do not know about them

welcome to the next visit +++ Welcome to Mega +++ +++ Welcome to Mega +++ If you buy more quantity, Please contact us If you buy more quantity, Please contact us Basic attributes
Module name
Dual H-bridge motor driver module
Operating mode
H-bridge driver (dual)
Master chip
L298N
Packing
9 boxed shipments
Logic voltage
5V
Drive voltage
5V-35V
Logic Current
0mA-36mA
Drive current
2A (MAX single bridge)
Storage Temperature
-20 to 135 Maximum Power
25W
Weight
30g
External dimensions
43 * 43 * 27mm
Product Features:
This module uses ST\'s L298N chip as the main driver, driving ability, low heat, strong anti-interference ability.
This module can use the built-in 78M05 to take power by driving the power section, but in order to avoid damage to the regulator chip, when use is greater than the drive voltage of 12V, use an external 5V logic supply.
The module uses a large-capacity filter capacitors, drain diode can improve reliability.
The cargo module audience, photographed you, thank you. Drive modules use Tips
Driver module range of applications

The L298N is the ST Company production of a high-voltage, high-current motor driver chips. The chip uses a 15-pin package. The main features are: high operating voltage, the maximum operating voltage of up to 46V; Output current instantaneous peak current up to 3A continuous operating current of 2A; rated power of 25W. Contains two H-bridge high voltage and high current full-bridge driver can be used to drive a DC motor and stepper motor, relay coil inductive load; using standard logic level signal control; having two enable control end allow or prohibit the work has a logic device power supply input terminal, in the case regardless of the input signal affect the internal logic circuit portion to operate at a low voltage; can be an external sense resistor, the amount of change in feedback to the control circuit. The L298N chip drive motor, the chip can drive two-phase stepper motors or four-phase stepper motor can drive two DC motors.
Description / Note
Port Function Chart

Circuit schematic diagram

This module integrates a built-in 5V power supply. When you drive voltage of 7V-35V can onboard 5V logic supply, do not input voltage when using onboard 5V power supply, the +5 V power supply interface, but leads to 5V voltage for external use
When ENA so IN1 IN2 control OUT1 OUT2
When ENB so IN3 IN4 control OUT3 OUT4
Application examples
1: drive stepper motor
Drive ordinary 4-wire 2-phase motor connection, as shown
Enable ENA ENB
From IN1 - IN4 enter the following drive timing, you can control the speed and direction of the stepper motor

2: drive DC motor
This module is a 2-channel H-bridge driver can drive two motors at the same time, the connection shown in Figure shown
So can ENA ENB
Respectively, from the speed and direction of the input to the PWM signal driving the motor 1 on IN1 IN2
The PWM signal of the speed and direction of the drive motor 2 can be respectively from IN3 IN4 input
Signal as shown

Basic attributes
Module name
Dual H-bridge motor driver module
Operating mode
H-bridge driver (dual)
Master chip
L298N
Packing
9 boxed shipments
Logic voltage
5V
Drive voltage
5V-35V
Logic Current
0mA-36mA
Drive current
2A (MAX single bridge)
Storage Temperature
-20 to 135 Maximum Power
25W
Weight
30g
External dimensions
43 * 43 * 27mm
Product Features:
This module uses ST\'s L298N chip as the main driver, driving ability, low heat, strong anti-interference ability.
This module can use the built-in 78M05 to take power by driving the power section, but in order to avoid damage to the regulator chip, when use is greater than the drive voltage of 12V, use an external 5V logic supply.
The module uses a large-capacity filter capacitors, drain diode can improve reliability.
The cargo module audience, photographed you, thank you. Drive modules use Tips
Driver module range of applications

The L298N is the ST Company production of a high-voltage, high-current motor driver chips. The chip uses a 15-pin package. The main features are: high operating voltage, the maximum operating voltage of up to 46V; Output current instantaneous peak current up to 3A continuous operating current of 2A; rated power of 25W. Contains two H-bridge high voltage and high current full-bridge driver can be used to drive a DC motor and stepper motor, relay coil inductive load; using standard logic level signal control; having two enable control end allow or prohibit the work has a logic device power supply input terminal, in the case regardless of the input signal affect the internal logic circuit portion to operate at a low voltage; can be an external sense resistor, the amount of change in feedback to the control circuit. The L298N chip drive motor, the chip can drive two-phase stepper motors or four-phase stepper motor can drive two DC motors.
Description / Note
Port Function Chart

Circuit schematic diagram

This module integrates a built-in 5V power supply. When you drive voltage of 7V-35V can onboard 5V logic supply, do not input voltage when using onboard 5V power supply, the +5 V power supply interface, but leads to 5V voltage for external use
When ENA so IN1 IN2 control OUT1 OUT2
When ENB so IN3 IN4 control OUT3 OUT4
Application examples
1: drive stepper motor
Drive ordinary 4-wire 2-phase motor connection, as shown
Enable ENA ENB
From IN1 - IN4 enter the following drive timing, you can control the speed and direction of the stepper motor

2: drive DC motor
This module is a 2-channel H-bridge driver can drive two motors at the same time, the connection shown in Figure shown
So can ENA ENB
Respectively, from the speed and direction of the input to the PWM signal driving the motor 1 on IN1 IN2
The PWM signal of the speed and direction of the drive motor 2 can be respectively from IN3 IN4 input
Signal as shown

Basic attributes
Module name
Dual H-bridge motor driver module
Operating mode
H-bridge driver (dual)
Master chip
L298N
Packing
9 boxed shipments
Logic voltage
5V
Drive voltage
5V-35V
Logic Current
0mA-36mA
Drive current
2A (MAX single bridge)
Storage Temperature
-20 to 135 Maximum Power
25W
Weight
30g
External dimensions
43 * 43 * 27mm
Product Features:
This module uses ST\'s L298N chip as the main driver, driving ability, low heat, strong anti-interference ability.
This module can use the built-in 78M05 to take power by driving the power section, but in order to avoid damage to the regulator chip, when use is greater than the drive voltage of 12V, use an external 5V logic supply.
The module uses a large-capacity filter capacitors, drain diode can improve reliability.
The cargo module audience, photographed you, thank you. Drive modules use Tips
Driver module range of applications

The L298N is the ST Company production of a high-voltage, high-current motor driver chips. The chip uses a 15-pin package. The main features are: high operating voltage, the maximum operating voltage of up to 46V; Output current instantaneous peak current up to 3A continuous operating current of 2A; rated power of 25W. Contains two H-bridge high voltage and high current full-bridge driver can be used to drive a DC motor and stepper motor, relay coil inductive load; using standard logic level signal control; having two enable control end allow or prohibit the work has a logic device power supply input terminal, in the case regardless of the input signal affect the internal logic circuit portion to operate at a low voltage; can be an external sense resistor, the amount of change in feedback to the control circuit. The L298N chip drive motor, the chip can drive two-phase stepper motors or four-phase stepper motor can drive two DC motors.
Description / Note
Port Function Chart

Circuit schematic diagram

This module integrates a built-in 5V power supply. When you drive voltage of 7V-35V can onboard 5V logic supply, do not input voltage when using onboard 5V power supply, the +5 V power supply interface, but leads to 5V voltage for external use
When ENA so IN1 IN2 control OUT1 OUT2
When ENB so IN3 IN4 control OUT3 OUT4
Application examples
1: drive stepper motor
Drive ordinary 4-wire 2-phase motor connection, as shown
Enable ENA ENB
From IN1 - IN4 enter the following drive timing, you can control the speed and direction of the stepper motor

2: drive DC motor
This module is a 2-channel H-bridge driver can drive two motors at the same time, the connection shown in Figure shown
So can ENA ENB
Respectively, from the speed and direction of the input to the PWM signal driving the motor 1 on IN1 IN2
The PWM signal of the speed and direction of the drive motor 2 can be respectively from IN3 IN4 input
Signal as shown

Drive modules use Tips
Driver module range of applications

The L298N is the ST Company production of a high-voltage, high-current motor driver chips. The chip uses a 15-pin package. The main features are: high operating voltage, the maximum operating voltage of up to 46V; Output current instantaneous peak current up to 3A continuous operating current of 2A; rated power of 25W. Contains two H-bridge high voltage and high current full-bridge driver can be used to drive a DC motor and stepper motor, relay coil inductive load; using standard logic level signal control; having two enable control end allow or prohibit the work has a logic device power supply input terminal, in the case regardless of the input signal affect the internal logic circuit portion to operate at a low voltage; can be an external sense resistor, the amount of change in feedback to the control circuit. The L298N chip drive motor, the chip can drive two-phase stepper motors or four-phase stepper motor can drive two DC motors.
Description / Note
Port Function Chart

Circuit schematic diagram

This module integrates a built-in 5V power supply. When you drive voltage of 7V-35V can onboard 5V logic supply, do not input voltage when using onboard 5V power supply, the +5 V power supply interface, but leads to 5V voltage for external use
When ENA so IN1 IN2 control OUT1 OUT2
When ENB so IN3 IN4 control OUT3 OUT4
Application examples
1: drive stepper motor
Drive ordinary 4-wire 2-phase motor connection, as shown
Enable ENA ENB
From IN1 - IN4 enter the following drive timing, you can control the speed and direction of the stepper motor

2: drive DC motor
This module is a 2-channel H-bridge driver can drive two motors at the same time, the connection shown in Figure shown
So can ENA ENB
Respectively, from the speed and direction of the input to the PWM signal driving the motor 1 on IN1 IN2
The PWM signal of the speed and direction of the drive motor 2 can be respectively from IN3 IN4 input
Signal as shown

 10pcs L298N Module Dual H Bridge Stepper Motor Driver Board ModulesSmart Car FZ0407

Banktransfer
1) We accept Alipay, West Union, TT. All major credit cards are accepted through secure payment processor ESCROW. 2) Payment must be made within 3 days of order.
3) If you can\'t checkout immediately after auction close, please wait for a few minutes and retry Payments must be completed within 3 days.

Banktransfer
1) We accept Alipay, West Union, TT. All major credit cards are accepted through secure payment processor ESCROW. 2) Payment must be made within 3 days of order.
3) If you can\'t checkout immediately after auction close, please wait for a few minutes and retry Payments must be completed within 3 days.

 10pcs L298N Module Dual H Bridge Stepper Motor Driver Board ModulesSmart Car FZ0407

1. WORLDWIDE SHIPPING. (Except some countries and APO/FPO)
2. Orders processed timely after the payment verification.
3. We only ship to confirmed order addresses. Your order address MUST MATCH your Shipping address.
4. The images shown are not the actual item and are for your reference only.
5. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season.
6. If you have not received your shipment within 30 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
7. Due to stock status and time differences, we will choose to ship your item from our first available warehouse for fast delivery.
8. Delivery Time:

1. WORLDWIDE SHIPPING. (Except some countries and APO/FPO)
2. Orders processed timely after the payment verification.
3. We only ship to confirmed order addresses. Your order address MUST MATCH your Shipping address.
4. The images shown are not the actual item and are for your reference only.
5. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season.
6. If you have not received your shipment within 30 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
7. Due to stock status and time differences, we will choose to ship your item from our first available warehouse for fast delivery.
8. Delivery Time:
HK Post Air-Mail

 10pcs L298N Module Dual H Bridge Stepper Motor Driver Board ModulesSmart Car FZ0407

1. You have 7 days to contact us and 30 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and WE WILL NOT ISSUE YOU A REFUND OR REPLACEMENT. There are NO EXCEPTIONS! Shipping cost is bear by both seller and buyer in half.
2. All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number, specific reason for the return, and your po#.
3. We will refund YOUR FULL WINNING BID AMOUNT, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER BOTH Buyer and Seller cancel the transaction from aliexpress. OR, you may choose to have a replacement.
4. We will bear all the shipping cost if the product(s) is (are) not as advertised.
 10pcs L298N Module Dual H Bridge Stepper Motor Driver Board ModulesSmart Car FZ0407

1. 12 months Manufacturer`s limited Warranty for defective items (excluding items damaged and/or misused after receipt). Accessories come with a 3-month warranty.
2. Defective items MUST BE reported and returned within the warranty period (and in the original packaging, if possible). You must tell us what the defect is and give us your order number. WE DO NOT REPAIR OR REPLACE ITEMS WITH AN EXPIRED WARRANTY.
You agree to all of the above-listed policies upon ordering on aliexpress!

 10pcs L298N Module Dual H Bridge Stepper Motor Driver Board ModulesSmart Car FZ0407

We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
It is impossible to address issues if we do not know about them

welcome to the next visit

Customer Reviews

Similar Products