Please note that we are selling factory direct products. All our products are 100% brand new in manufacturer\'s packaging.
1-) H: Hall Sensor
2-) E: Elbow S: Straight
3-) 2: 1/4\'\' 4: 1/2\'\'
4-) T:Thread P: Plug
Clean and beautiful, smooth without burr, without off color
Water pressure resistance
1.75 MPa pressure has no slack phenomenon, and parts no crack,
relaxation, inflation, and deformation anomaly
Operating voltage range
Maximum operating current
The output pulse high level
In 5 V rated voltage, the output of the high level requirements
in 4.5 V above
The output pulse low level
In 5 V rated voltage, the output of the low level requirements
in 0.5 V the following
The output pulse duty ratio
In the rated voltage, the output pulse occupies emptiescompared
Flow pulse characteristics
AC500V 50Hz(Don\'t breakdown or flash winding)
In 100 °C temperature placed in 72 hours, in the environmental
temperature back after 1 hour the accuracy of measurement
requirements within the plus or minus 5%
In 20 °C temperature placed in-72 hours, in the environmental temperature back after
1 hour the accuracy of measurement requirements within the
plus or minus 5%
Mode of connection
Red: the positive, black: negative, yellow:
The principle of operation
Water flow sensor is the use of the Hall element to measure the Hall effect magnetic sensors
of physical quantities. Water flow sensor mainly consists of copper body, water the rotor assembly,
steady flow component and Hall sensors, installed in the water heater inlet side used to detect the
size and water flow off.
Mainly used for water heater, boiler, water dispensers, coffee machines, hot card machines,
steam equipment, water system, the campus card sales, selling self-help water systems,
water treatment equipment, cooling systems, mechanical equipment, instrumentation,
1. When magnetic material is close with the sensor, its characteristics may vary.
2. In order to avoid particle debris, the sensor must be installed after a filter.
3. The flow sensor installation has to avoid strong vibration and shaking of the environment,
so as not to affect the sensor\'s measurement accuracy.