12V 5Ton Car Electric Tire Lifting Car Jacks Hydraulic Air Infatable Car Floor Jack With Impact Wrench And Tire Gauge Air Pump
- Item TypeCar Jacks
- Material TypeMetal, Plastic
- Brand NameDinsen
- Item Weight10Kg
- Item Length37Cm
- Item Height22Cm
- Special FeaturesCar Jack And Tire Inflator Pump
- TypeElectric Jack
- Model NameKf-A1242
- Item Width36Cm
- Input VoltageDc 12V
- ModelDstz02+ 5T
KUNFINE 12V 5Ton Car Electric Tire Lifting Car Jacks Hydraulic Air Infatable Car Floor Jack With Impact Wrench And Tire Gauge Air Pump
Advantages: The machine is with the fashionable and beautiful design, and adopts the advanced electric machinery technology. It is low noise, quick speeding, stable lifting perfomance and so on.
Safety: Considering the safety, the machine designs self-locking power structure and overloading protection device specially. That is to say: when the power has been disconnected, the lifted jack will not fall, only re-connecting the power, the jack will go on working, or using the safety knob to fall the car, which will protect the operator’s personal safety effectively.
Practicability: In order to strengthen the practicability, the machine is added the functions of Tire Inflator Pump, Illumination and Warning.
So the machine combines two functions: Car Jack and Tire Inflator Pump
Application: The machine is widely used for Family Car, Go-anywhere Vehicle, Multi-Purpose Vehicle.
(1)Stop the car, tension the car brake.
(2)Check the switch whether it is to the close position, it should be to “O” state, if no, please do it so first, then connect the power plug into the car cigarette lighter.(Note: if the battery is not enough, please charge it first(start the car engine) or replace the battery)
(3)Put the jack in the side of car tyre, and ensure the centre of Pressure Rod to align the loading part of automobile chassis, then rotate the adjusting screw to make it close to the automobile chassis as far as possible.
(4)Adjust the function switch to “Lift”, the direction switch to “Up”, then the jack will start to work, till the distance between the car tyre and the floor is about 5cm, reset the power switch, while the power is disconnected, the machine would lock automatically and wouldn’t fall.
(5)After changing the tyre, adjust the direction switch to “Down”, the jack would start to fall in constant speed.
(6)Finish all, please collect the cables and tools in the box.
Rated Power：150W Operating Voltage：DC 12V Max.Current：13A Max.Loading Car Weight：5T Min.Height：135/155mm Max.Height：360/450mm
(1)Prepare for the equipment well, pull out the air hose and choose the suitable inflatable head to connect, then turn on the power.
(2)Adjust the function switch to “Inflation”, then it would start to inflate, please check the change of the pressure gauge.
(3)If finishing, please close the power first, then pull out the inflatable head to collect in the tool box. Later also pull out the plug from the cigarette lighter, then collect the cables into the tool box.
Note: when inflating each time, Not more than 10minutes.
Specification Max Pressue：150PSI Air Flow：35L/min Current：10A Air hose length：0.65m Power Cable：3.5m Electric Impact Wrench Function
1. Park your vehicle safely on level ground ,then follow your vehicle manufacturer’s instructions to jack up the vehicle so that the wheel you want to change is clear of the ground.
2. Plug the Electric Impact Wrench in to your Vehicle’s cigarette lighter socket, or connect directly to your car battery 12V using only the supplied adapter cable.
3. Choose the proper socket to attach to the wrench’s shaft (check Figure1).
4. Switch to the correct direction for loosening or tightening (check Figure2).
a. Press the switch to the right side (◄) to start operating. Each nut will be loosened after hearing the “clatter” sound two or three times
b. Press the switch to the left side(►) to tighten nuts ,It will be tight enough after hearing the “clatter” sound two or three times.
Operating Voltage：DC 12V Max.Current：12A Rated Power：100W Max.Torque：340N.M Power Cable：3.5m
1. 2 in 1 Electric jack 1pc 2. Electric Impact Wrench 1pc 3. Plastic Tool Box 1pc 4. 12V DC Power Cable 1pc 5. Safety Hammer 1pc 6. Socket Adapters 2pcs 7. Batter Clamp Connecting Cable 1pc 8. Nozzles(Narrow cone, Wide Cone and Needle) 3pcs 9. Fuse 2pcs 10. Hex Wrench 1pc 11. Gloves 1pair