SoliDrop
Welcome, Guest Sign InSign Up

12Vdc 2Ch Wireless Remote Control Switch Security System Latched/toggle/momentary Learning Code1Switch 2Controller

12Vdc 2Ch Wireless Remote Control Switch Security System Latched/toggle/momentary Learning Code1Switch 2Controller
Price Tracker
Price Type
Price Desired
$
Your Email
Create aliexpress price watches
Price History
Product Details
  • Is_CustomizedYes
  • Operating Temperature-40'c-+60'c
  • Brand NameYk
  • Max. Voltage12V
  • Max. Current10A
  • Model NumberDc12V-2Ch+Bk-Ab2
  • Place Of OriginGuangdong, China (Mainland)
Product Description
Here is 1 receiver + 2 transmitters Working Voltage: DC12V Max Load:10A Relay, Resistive load less than 8A,Inductive load less than 3A Channel: 2CH Relay A---NO B---COM C---NC Working Frequency: 315/433MZH Optional Receiver sensitivity: -105Db Working temperature: -10\'C - +60\'C Encoding Type: Learning Code (add transmitter by the learning button on the receiver) Output State: It is adjusted by the Jumper on the Receiver Board, (before you change it .you need turn OFF the power. Until you have changed it, then turn ON the power again, or the State will not be changed) Transmitting Range: 10-100m 1.Working Voltage: DC12V more or less than 10% 2.Current:Standby less than 10mA,Working less than 128mA 3.Working Temperature: -10\'C—+60\'C 4.Receiver Frequency: 315MHz/433.92MHZ 5.Receiving Sensitivity: -110dB 6.Output State: Output 0V Switching Value use Relay NO COM NC 7.Max Load:10A Relay, Resistive load less than 8A,Inductive load less than 3A 8. Size:69*49*18mm Receiver with 3 LED Indicator A: Signal LED Indicator B: NO.1 Relay Working LED Indicator C: NO.2 Relay Working LED Indicator Learning Code: Add transmitter by the Learning Button on the receiver Output State: It is adjusted by the Jumper on the Receiver Board, (before you change it .you need turn OFF the power. Until you have changed it, then turn ON the power again, or the State will not be changed) Momentary----------Jumper on “1&2” Toggle----------------Jumper “2&3” Latched--------------Take away the Jumper or put the Jumper on 1 Pin Momentary------------Press the Transmitter button and keep, the receiver relay is ON, release button, the receiver relay is OFF, Toggle---------------Press transmitter button for 1 time, the receiver relay is ON, press button again, the receiver relay is OFF, Latched------------------Press transmitter button A, the receiver relay A is ON, Press Button B, the Receiver is OFF Learning Method Input power for the Receiver .Press the Learning Button until the Led indicator ON. Then press transmitter, the Led indicator flash fast, it mean learning successfully. Clearing Code Keeping press the Learning Button on the receiver until the LED indicator ON and flash fast, it mean the code have been cleared successfully.
1.Working Voltage: DC12V more or less than 10% 2.Current:Standby less than 10mA,Working less than 128mA 3.Working Temperature: -10\'C—+60\'C 4.Receiver Frequency: 315MHz/433.92MHZ 5.Receiving Sensitivity: -110dB 6.Output State: Output 0V Switching Value use Relay NO COM NC 7.Max Load:10A Relay, Resistive load less than 8A,Inductive load less than 3A 8. Size:69*49*18mm Receiver with 3 LED Indicator A: Signal LED Indicator B: NO.1 Relay Working LED Indicator C: NO.2 Relay Working LED Indicator Learning Code: Add transmitter by the Learning Button on the receiver Output State: It is adjusted by the Jumper on the Receiver Board, (before you change it .you need turn OFF the power. Until you have changed it, then turn ON the power again, or the State will not be changed) Momentary----------Jumper on “1&2” Toggle----------------Jumper “2&3” Latched--------------Take away the Jumper or put the Jumper on 1 Pin Momentary------------Press the Transmitter button and keep, the receiver relay is ON, release button, the receiver relay is OFF, Toggle---------------Press transmitter button for 1 time, the receiver relay is ON, press button again, the receiver relay is OFF, Latched------------------Press transmitter button A, the receiver relay A is ON, Press Button B, the Receiver is OFF Learning Method Input power for the Receiver .Press the Learning Button until the Led indicator ON. Then press transmitter, the Led indicator flash fast, it mean learning successfully. Clearing Code Keeping press the Learning Button on the receiver until the LED indicator ON and flash fast, it mean the code have been cleared successfully.
Receiver with 3 LED Indicator A: Signal LED Indicator B: NO.1 Relay Working LED Indicator C: NO.2 Relay Working LED Indicator Learning Code: Add transmitter by the Learning Button on the receiver Output State: It is adjusted by the Jumper on the Receiver Board, (before you change it .you need turn OFF the power. Until you have changed it, then turn ON the power again, or the State will not be changed) Momentary----------Jumper on “1&2” Toggle----------------Jumper “2&3” Latched--------------Take away the Jumper or put the Jumper on 1 Pin Momentary------------Press the Transmitter button and keep, the receiver relay is ON, release button, the receiver relay is OFF, Toggle---------------Press transmitter button for 1 time, the receiver relay is ON, press button again, the receiver relay is OFF, Latched------------------Press transmitter button A, the receiver relay A is ON, Press Button B, the Receiver is OFF Learning Method Input power for the Receiver .Press the Learning Button until the Led indicator ON. Then press transmitter, the Led indicator flash fast, it mean learning successfully. Clearing Code Keeping press the Learning Button on the receiver until the LED indicator ON and flash fast, it mean the code have been cleared successfully.
Learning Code: Add transmitter by the Learning Button on the receiver Output State: It is adjusted by the Jumper on the Receiver Board, (before you change it .you need turn OFF the power. Until you have changed it, then turn ON the power again, or the State will not be changed) Momentary----------Jumper on “1&2” Toggle----------------Jumper “2&3” Latched--------------Take away the Jumper or put the Jumper on 1 Pin Momentary------------Press the Transmitter button and keep, the receiver relay is ON, release button, the receiver relay is OFF, Toggle---------------Press transmitter button for 1 time, the receiver relay is ON, press button again, the receiver relay is OFF, Latched------------------Press transmitter button A, the receiver relay A is ON, Press Button B, the Receiver is OFF Learning Method Input power for the Receiver .Press the Learning Button until the Led indicator ON. Then press transmitter, the Led indicator flash fast, it mean learning successfully. Clearing Code Keeping press the Learning Button on the receiver until the LED indicator ON and flash fast, it mean the code have been cleared successfully.
Learning Code: Add transmitter by the Learning Button on the receiver Output State: It is adjusted by the Jumper on the Receiver Board, (before you change it .you need turn OFF the power. Until you have changed it, then turn ON the power again, or the State will not be changed) Momentary----------Jumper on “1&2” Toggle----------------Jumper “2&3” Latched--------------Take away the Jumper or put the Jumper on 1 Pin Momentary------------Press the Transmitter button and keep, the receiver relay is ON, release button, the receiver relay is OFF, Toggle---------------Press transmitter button for 1 time, the receiver relay is ON, press button again, the receiver relay is OFF, Latched------------------Press transmitter button A, the receiver relay A is ON, Press Button B, the Receiver is OFF Learning Method Input power for the Receiver .Press the Learning Button until the Led indicator ON. Then press transmitter, the Led indicator flash fast, it mean learning successfully. Clearing Code Keeping press the Learning Button on the receiver until the LED indicator ON and flash fast, it mean the code have been cleared successfully.
Output State: It is adjusted by the Jumper on the Receiver Board, (before you change it .you need turn OFF the power. Until you have changed it, then turn ON the power again, or the State will not be changed) Momentary----------Jumper on “1&2” Toggle----------------Jumper “2&3” Latched--------------Take away the Jumper or put the Jumper on 1 Pin Momentary------------Press the Transmitter button and keep, the receiver relay is ON, release button, the receiver relay is OFF, Toggle---------------Press transmitter button for 1 time, the receiver relay is ON, press button again, the receiver relay is OFF, Latched------------------Press transmitter button A, the receiver relay A is ON, Press Button B, the Receiver is OFF Learning Method Input power for the Receiver .Press the Learning Button until the Led indicator ON. Then press transmitter, the Led indicator flash fast, it mean learning successfully. Clearing Code Keeping press the Learning Button on the receiver until the LED indicator ON and flash fast, it mean the code have been cleared successfully.
(before you change it .you need turn OFF the power. Until you have changed it, then turn ON the power again, or the State will not be changed) Momentary----------Jumper on “1&2” Toggle----------------Jumper “2&3” Latched--------------Take away the Jumper or put the Jumper on 1 Pin Momentary------------Press the Transmitter button and keep, the receiver relay is ON, release button, the receiver relay is OFF, Toggle---------------Press transmitter button for 1 time, the receiver relay is ON, press button again, the receiver relay is OFF, Latched------------------Press transmitter button A, the receiver relay A is ON, Press Button B, the Receiver is OFF Learning Method Input power for the Receiver .Press the Learning Button until the Led indicator ON. Then press transmitter, the Led indicator flash fast, it mean learning successfully. Clearing Code Keeping press the Learning Button on the receiver until the LED indicator ON and flash fast, it mean the code have been cleared successfully.
Momentary----------Jumper on “1&2” Toggle----------------Jumper “2&3” Latched--------------Take away the Jumper or put the Jumper on 1 Pin Momentary------------Press the Transmitter button and keep, the receiver relay is ON, release button, the receiver relay is OFF, Toggle---------------Press transmitter button for 1 time, the receiver relay is ON, press button again, the receiver relay is OFF, Latched------------------Press transmitter button A, the receiver relay A is ON, Press Button B, the Receiver is OFF Learning Method Input power for the Receiver .Press the Learning Button until the Led indicator ON. Then press transmitter, the Led indicator flash fast, it mean learning successfully. Clearing Code Keeping press the Learning Button on the receiver until the LED indicator ON and flash fast, it mean the code have been cleared successfully.
Momentary------------Press the Transmitter button and keep, the receiver relay is ON, release button, the receiver relay is OFF, Toggle---------------Press transmitter button for 1 time, the receiver relay is ON, press button again, the receiver relay is OFF, Latched------------------Press transmitter button A, the receiver relay A is ON, Press Button B, the Receiver is OFF Learning Method Input power for the Receiver .Press the Learning Button until the Led indicator ON. Then press transmitter, the Led indicator flash fast, it mean learning successfully. Clearing Code Keeping press the Learning Button on the receiver until the LED indicator ON and flash fast, it mean the code have been cleared successfully.
Momentary------------Press the Transmitter button and keep, the receiver relay is ON, release button, the receiver relay is OFF, Toggle---------------Press transmitter button for 1 time, the receiver relay is ON, press button again, the receiver relay is OFF, Latched------------------Press transmitter button A, the receiver relay A is ON, Press Button B, the Receiver is OFF Learning Method Input power for the Receiver .Press the Learning Button until the Led indicator ON. Then press transmitter, the Led indicator flash fast, it mean learning successfully. Clearing Code Keeping press the Learning Button on the receiver until the LED indicator ON and flash fast, it mean the code have been cleared successfully.
Toggle---------------Press transmitter button for 1 time, the receiver relay is ON, press button again, the receiver relay is OFF, Latched------------------Press transmitter button A, the receiver relay A is ON, Press Button B, the Receiver is OFF Learning Method Input power for the Receiver .Press the Learning Button until the Led indicator ON. Then press transmitter, the Led indicator flash fast, it mean learning successfully. Clearing Code Keeping press the Learning Button on the receiver until the LED indicator ON and flash fast, it mean the code have been cleared successfully.
Latched------------------Press transmitter button A, the receiver relay A is ON, Press Button B, the Receiver is OFF Learning Method Input power for the Receiver .Press the Learning Button until the Led indicator ON. Then press transmitter, the Led indicator flash fast, it mean learning successfully. Clearing Code Keeping press the Learning Button on the receiver until the LED indicator ON and flash fast, it mean the code have been cleared successfully.
Learning Method Input power for the Receiver .Press the Learning Button until the Led indicator ON. Then press transmitter, the Led indicator flash fast, it mean learning successfully. Clearing Code Keeping press the Learning Button on the receiver until the LED indicator ON and flash fast, it mean the code have been cleared successfully.
Learning Method Input power for the Receiver .Press the Learning Button until the Led indicator ON. Then press transmitter, the Led indicator flash fast, it mean learning successfully. Clearing Code Keeping press the Learning Button on the receiver until the LED indicator ON and flash fast, it mean the code have been cleared successfully.
Input power for the Receiver .Press the Learning Button until the Led indicator ON. Then press transmitter, the Led indicator flash fast, it mean learning successfully. Clearing Code Keeping press the Learning Button on the receiver until the LED indicator ON and flash fast, it mean the code have been cleared successfully.
Clearing Code Keeping press the Learning Button on the receiver until the LED indicator ON and flash fast, it mean the code have been cleared successfully.
Clearing Code Keeping press the Learning Button on the receiver until the LED indicator ON and flash fast, it mean the code have been cleared successfully.
Keeping press the Learning Button on the receiver until the LED indicator ON and flash fast, it mean the code have been cleared successfully.

 12VDC 2CH Wireless Remote Control Switch Security System Latched/Toggle/Momentary Learning Code1Switch 2Controller

 12VDC 2CH Wireless Remote Control Switch Security System Latched/Toggle/Momentary Learning Code1Switch 2Controller

 12VDC 2CH Wireless Remote Control Switch Security System Latched/Toggle/Momentary Learning Code1Switch 2Controller

Customer Reviews
Related Products