100*100cm area customize with 15w laser working wood cutting, 5500MW big DIY laser engraving machine,support 15w power 1600mw 2500mw 3000mw/4000mw diy marking machine,diy laser engrave machine,advanced toy with TTL control laser, laser carving machine.
Warm nocetice: this machine is send unassembled, we will send assemble instruction and software by email, it is easy assamble and operate
shipping with two package.
NOTE: this control board can adjust laser power
Wavelength: 450nm LD doide input current: 1-3A input power supply: 12V DC TTL: 0v on,5v off frequency Focus: Yes 15w parameter
power supply: 12v DC focused beam:from 0.5-10mm adjustable Wave length:450NM Power currect:limit less 6A (we send power supply is 5A) LD doide current input:4-5A TTL frequency:0v on 5v off laser power: impulse=15W, really power average 6-7w output. NOTE1: the 15w laser will with two lens, black focus lens+copper bigger power lens=2 lens, fix the bigger power lens it will output bigger power than black lens,will can cut more depth on wood. this laser machine better for engrave and cutting, we will not promise 15w can engrave on metal, so pls donot buy this machine for metal engrave. NOTE2: the aluminum profile=total 5pieces=2pcs 2020 type; 3pieces 2040 type. see the last photo below.
1 x Laser machine 1*1m
1 x goggles
1 x bigger power lens(only for 15w)
1 x laser module select (15w 1600mw 2500mw 3000mw 4000mw 5000mw)
1 x instruction document(send by email)
1 x power supply 12v 5A(15w will with two power supply)
working area can customize