Please be notice the silicone heating belt can be made according to your requirement. If you need special products, please let us know your requirement before you place an order. We are very glad and always ready to support you. A lot of standard stock products are available in our store, you can order directly. Please be notice all the standard heater rated power is 220V AC, if you need special, please let us know, 100~380V is available. Thanks.
type:15x2000mm 160W 220V
1. Maximum length of the belt is 50meters.
2. 15mm, 25mm products, 80W/meter, 30mm products, 100W/meter, 50mm products, 150W/meter
3. Maximum temperature is 250ºC, it is recommended to use below 50 ºC.
4. Insulation Resistance: >50Mohm
5. Dielectric Strength: ~1500V/min
6. Power Deviation: ±10%
Standdard silicon Rubber Heating Belt Specifications
Waterproof Silicone Heating Belt Silicone Heating Belt is of good waterproof performance, can be used for heating, heat tracing and heat preservation of pipelines, pots and tanks of industrial equipment or laboratory in moist places without explosive gas. It can be directly wound on the surface of a to-be-heated position, and is of simple installation, safety and reliability.
(1) It is mainly composed of nickel-chromium alloy wires and insulating material, and has fast heating speed, high heat efficiency and long service life.
(2) Alkali-free glass fiber core rack is wound with electric heating wires, silicon rubber is used as main insulation, the heat resistance performance is excellent, and the insulation performance is reliable.
(3) It has great flexibility, and can be directly wound on a to-be-heated device, with good contact and uniform heating.
Max Resistance Temperature of Insulating Material: 250 DEG C Recommended Use Temperature: 50Mohm Dielectric Strength: ~1500V/min Power Deviation: ±10%
Product Application and Notes: Silicon rubber electric heating belt is a specially-soft fixed-length heating belt, and has high designed power density. Therefore, besides the heat tracing and heat preservation of common constant power belt, it further can be used in places needing heating in some conditions.
Notes in Use:
(1) When in installation, the silicon rubber plane side of the electric heating belt should tightly attach to the surface of dielectric pipelines and pot bodies, and is tightly firmed by aluminum adhesive tape. (2) Should add heat-insulation layer on the outside of the electric heating belt for reducing heat loss. (3) Forbid overlapping and winding for preventing it from being damaged owing to overheat. The product can be customized according to the customer requirements (on specification and size). Dielectric Strength of High Voltage Resistance Belt ~20000V/min Silicon Rubber Heating Belt Specifications Special order according to your requirement is possible, please let us know your requirement in detail. We will manufacture for you and we will provide you the best price.
You can find the below items from us, too.