New arrival 2.4Ghz mini remote controller with receiver for electric skateboard longboard Free shipping by DHL
----------------------------------------------------------- Mini Remote Controller 2.4Ghz
Weight: 48g Size:100x52x20mm Frequency: 2.4G Channel: 2 channels Application of ESC: All ESC Color: Black Power:Li-po 3.7v 500mAh(included) Receiver:included Wrist strap Suitable for : Electric skateboard longbaord
USB Charge spot (USB line do not inclueded,as it is suitable for normal USB line) Note:No retail box. Attention:As the paper manual is not clear for the bind procedure,pleae refer to the instruction below here) How to bind the transmitter to the receiver?
1).Check and make sure all the wires are mounted,and the remote is CLOSED,insert the bind plug into CH3(Bind) on the receiver; 2).Switch on the ESC,you can see the receiver red light flash; 3).Press and hold on the bind button on the remote and then turn the remote on; 4).You should notice the transimitter go from flashing red to solid red,and also the solid red of the receiver; 5).Once you see a solid red light, you now know the two are binded together,and please pull the bind plug out (this is important,so the remote can record the throttle mid to realize the fail safe) 6).Then you can test it again by turning off the controller and it should flash.if you turn the power on Transmitter back on it should go back to solid red. Before running,it\'s better to test the fail safe fuction by closing the remote,if the motor didn\'t move,so the fail safe fuction is in good condition,when you find the motor is moving,you have to repeat the step No.1- No.6 above Noticed:
The price does not include insurance and any taxes of import country, any import charges or fees are buyer\'s responsibility, thanks for your understanding.