Carbon fiber, no radiation, high thermal efficiency, energy saving, environmental protection, the use of new T type joints, waterproof, safe, higher, the service life of up to 50 years.
Common problem 1, 24K and 12K difference? 24K is the 24000 root carbon fiber = 17 ohm resistor is suitable for floor heating 2, the diameter of the line is how much? 24 K 6 mm diameter 3, 24K power is how much? 24K=230 watts =1 group 12.5 meters = 2 square meters of buildings can be installed 1.5 square meters 3, what accessories need Plastic extruded board - reflection film - fiber network - hair Hotline - fixing clip nail thermostat (Note: buy plastic extruded board in the local building materials market, large volume, high transport costs, other accessories, we have sales) 4, about power consumption 15 square meters of room 3 hours of electricity, as a result of fever, when the temperature reaches the set temperature, the thermostat automatically power down, to save energy purposes. 5, the assembly of good and no good distinction? Did not assemble the two only 10 cm of power supply line, the assembly is good to the 10 cm of the power supply line received a main power line, the group is not more than 15. 6, about the installation Installation is very simple, we will guide the installation process. If there is a local installation team, but also to pay them to install, note: when the installation, the carbon fiber hair line between the hot wire can not cross, and can not be together, not to kill the bend. After the installation is finished, the cement floor is fully dry and then heated.