3 Pieces Per Lot Dm856 2-Phase Dsp Digital Stepper Drive With Max 80 Vdc Input Voltage And Max 5.6A Output Current

3 Pieces Per Lot Dm856 2-Phase Dsp Digital Stepper Drive With Max 80 Vdc Input Voltage And Max 5.6A Output Current

Price Monitor

Price Type
Desired Price$
Your Email
Sign up for price drop alerts
We are the leading aliexpress shopping assistant help you buy factory direct goods at unbeatable price.
Product prices and availability are accurate as of time indicated and are subject to change.

Price History

Product Details

  • Brand NameLeadshine
  • Motor TypeStepper Motor
  • Model NumberDm856
  • Control ModeStep & Direction
  • Max Input Frequency200Khz
  • Input Voltage Range20 - 80 Vdc
  • Output Current0.50 - 5.60 A
  • Logic Current Range7-16Ma (10Ma Typical)
  • Logic Voltage Range4-5 Vdc For Pulse Active High (Default)
  • Communication TypeRs232
  • Step Width2,500 Ns
  • Isolation Resistance500M Ohm
  • ProtectionOver-Current, Over-Voltage, And Stall

Product Description

Notice:
We only supply genuine Leadshine servo motor drive with reasonable price, if your budget is limit, please contact our service man online and he she will recommend you the low price other supplier.

DM856 2-Phase 32-Bit DSP Digital Stepper Drive (3 peices per lot ) The DM856 is a versatility fully digital stepping drive based on a DSP with advanced control algorithm. It brings a unique level of system smoothness, providing optimum torque and nulls mid-range instability. The self-test and auto-configuration technology offers optimum responses with different motors and easy-to-use. The driven motors can run with much smaller noise, lower heating, smoother movement than most of the drives on the markets. Its unique features make the DM856 an ideal solution for applications that require low-speed smoothness. Features: Extra-low motor noise offers excellent quietness Anti-Resonance, provides optimum torque and nulls mid-range instability Self-test and Auto-configuration technology, offers optimum responses with different motors Microstep resolutions programmable, from full-step to 102,400 steps/rev Supply voltage up to +80 VDC Output current programmable, from 0.5A to 5.6A Pulse input frequency up to 200 KHz Automatic idle-current reduction Supports PUL/DIR and CW/CCW modes Specification: Model: DM856 Phase: 2 Control Mode: Step & Dir Max Input Frequency: 200Khz Input Voltage Range: 20 - 80 VDC Suggested Power Supply Voltage Range: 24-72 VDC Output Current: 0.50 - 5.60 A Software Cofig. Resolution Range: 200 - 102,400 (increased by 200) # of DIP Switch Resolution Configurations: 15 DIP Switch Resolution Setings: 400, 800, 1600, 3200, 6400, 12800, 25600, 1000, 2000, 4000, 5000, 8000, 10000, 20000, 25000 Software Cofig Current Range: 0.50 - 5.60A (increase by 0.1A) # of DIP Switch Current Configurations: 7 DIP Switch Current Configurations: 2.1A, 2.7A, 3.2A, 3.8A, 4.3A, 4.9A, 5.6A Logic Current Range: 7-16mA (10mA typical) Logic Voltage Range: 4-5 VDC for pulse active high (default) , or 0-0.5V for pulse active low Communication Type: RS232 Pulse enabled at: Rising edge Idle Current Percent: 50 % Software Config. Idle Current Percent: 0-100% # of Digital Inputs: 3 Step Width: 2,500 ns Minimal Direction Setup Time: 5,000 ns Protection: Over current; over voltage; phase error Isolation Resistance: 500M Ohm Environment: Avoid dust, oil fog and corrosive gases Ambient Temporature: 0-50°C Humidity: 40–95% RH Operating Temporature: 0-70°C Vibration: 5.9 m/s2 Max Storage Temporature: -20-65°C Specification: 4.65 X 2.97 X 1.30 Inches Weight: 0.60 lb Extra-low motor noise offers excellent quietness Anti-Resonance, provides optimum torque and nulls mid-range instability Self-test and Auto-configuration technology, offers optimum responses with different motors Microstep resolutions programmable, from full-step to 102,400 steps/rev Supply voltage up to +80 VDC Output current programmable, from 0.5A to 5.6A Pulse input frequency up to 200 KHz Automatic idle-current reduction Supports PUL/DIR and CW/CCW modes Extra-low motor noise offers excellent quietness Anti-Resonance, provides optimum torque and nulls mid-range instability Self-test and Auto-configuration technology, offers optimum responses with different motors Microstep resolutions programmable, from full-step to 102,400 steps/rev Supply voltage up to +80 VDC Output current programmable, from 0.5A to 5.6A Pulse input frequency up to 200 KHz Automatic idle-current reduction Supports PUL/DIR and CW/CCW modes Extra-low motor noise offers excellent quietness Anti-Resonance, provides optimum torque and nulls mid-range instability Self-test and Auto-configuration technology, offers optimum responses with different motors Microstep resolutions programmable, from full-step to 102,400 steps/rev Supply voltage up to +80 VDC Output current programmable, from 0.5A to 5.6A Pulse input frequency up to 200 KHz Automatic idle-current reduction Supports PUL/DIR and CW/CCW modes Specification: Model: DM856 Phase: 2 Control Mode: Step & Dir Max Input Frequency: 200Khz Input Voltage Range: 20 - 80 VDC Suggested Power Supply Voltage Range: 24-72 VDC Output Current: 0.50 - 5.60 A Software Cofig. Resolution Range: 200 - 102,400 (increased by 200) # of DIP Switch Resolution Configurations: 15 DIP Switch Resolution Setings: 400, 800, 1600, 3200, 6400, 12800, 25600, 1000, 2000, 4000, 5000, 8000, 10000, 20000, 25000 Software Cofig Current Range: 0.50 - 5.60A (increase by 0.1A) # of DIP Switch Current Configurations: 7 DIP Switch Current Configurations: 2.1A, 2.7A, 3.2A, 3.8A, 4.3A, 4.9A, 5.6A Logic Current Range: 7-16mA (10mA typical) Logic Voltage Range: 4-5 VDC for pulse active high (default) , or 0-0.5V for pulse active low Communication Type: RS232 Pulse enabled at: Rising edge Idle Current Percent: 50 % Software Config. Idle Current Percent: 0-100% # of Digital Inputs: 3 Step Width: 2,500 ns Minimal Direction Setup Time: 5,000 ns Protection: Over current; over voltage; phase error Isolation Resistance: 500M Ohm Environment: Avoid dust, oil fog and corrosive gases Ambient Temporature: 0-50°C Humidity: 40–95% RH Operating Temporature: 0-70°C Vibration: 5.9 m/s2 Max Storage Temporature: -20-65°C Specification: 4.65 X 2.97 X 1.30 Inches Weight: 0.60 lb Model: DM856 Phase: 2 Control Mode: Step & Dir Max Input Frequency: 200Khz Input Voltage Range: 20 - 80 VDC Suggested Power Supply Voltage Range: 24-72 VDC Output Current: 0.50 - 5.60 A Software Cofig. Resolution Range: 200 - 102,400 (increased by 200) # of DIP Switch Resolution Configurations: 15 DIP Switch Resolution Setings: 400, 800, 1600, 3200, 6400, 12800, 25600, 1000, 2000, 4000, 5000, 8000, 10000, 20000, 25000 Software Cofig Current Range: 0.50 - 5.60A (increase by 0.1A) # of DIP Switch Current Configurations: 7 DIP Switch Current Configurations: 2.1A, 2.7A, 3.2A, 3.8A, 4.3A, 4.9A, 5.6A Logic Current Range: 7-16mA (10mA typical) Logic Voltage Range: 4-5 VDC for pulse active high (default) , or 0-0.5V for pulse active low Communication Type: RS232 Pulse enabled at: Rising edge Idle Current Percent: 50 % Software Config. Idle Current Percent: 0-100% # of Digital Inputs: 3 Step Width: 2,500 ns Minimal Direction Setup Time: 5,000 ns Protection: Over current; over voltage; phase error Isolation Resistance: 500M Ohm Environment: Avoid dust, oil fog and corrosive gases Ambient Temporature: 0-50°C Humidity: 40–95% RH Operating Temporature: 0-70°C Vibration: 5.9 m/s2 Max Storage Temporature: -20-65°C Specification: 4.65 X 2.97 X 1.30 Inches Weight: 0.60 lb Electrical Specifications
 3 pieces per lot DM856 2-Phase DSP Digital Stepper Drive with Max 80 VDC Input Voltage and Max 5.6A Output Current

Connector
 3 pieces per lot DM856 2-Phase DSP Digital Stepper Drive with Max 80 VDC Input Voltage and Max 5.6A Output Current

Microstep Resolution Selection And Current Setting
 3 pieces per lot DM856 2-Phase DSP Digital Stepper Drive with Max 80 VDC Input Voltage and Max 5.6A Output Current

Typical Connection
 3 pieces per lot DM856 2-Phase DSP Digital Stepper Drive with Max 80 VDC Input Voltage and Max 5.6A Output Current

Mechanical Specification
 3 pieces per lot DM856 2-Phase DSP Digital Stepper Drive with Max 80 VDC Input Voltage and Max 5.6A Output Current

Companion products 57HS09 (Stepper Motor) 57HS13(Stepper Motor) 57HS22 (Stepper Motor) SPS407 (Power) SPS407-L (Power) SPS608 (Power) SPS608-L (Power) RPS369 (Power) RPS488 (Power) RPS705 (Power) RPS705-L (Power) 57HS09 (Stepper Motor) 57HS13(Stepper Motor) 57HS22 (Stepper Motor) SPS407 (Power) SPS407-L (Power) SPS608 (Power) SPS608-L (Power) RPS369 (Power) RPS488 (Power) RPS705 (Power) RPS705-L (Power) 57HS13(Stepper Motor) 57HS22 (Stepper Motor) SPS407 (Power) SPS407-L (Power) SPS608 (Power) SPS608-L (Power) RPS369 (Power) RPS488 (Power) RPS705 (Power) RPS705-L (Power) 57HS22 (Stepper Motor) SPS407 (Power) SPS407-L (Power) SPS608 (Power) SPS608-L (Power) RPS369 (Power) RPS488 (Power) RPS705 (Power) RPS705-L (Power) SPS407 (Power) SPS407-L (Power) SPS608 (Power) SPS608-L (Power) RPS369 (Power) RPS488 (Power) RPS705 (Power) RPS705-L (Power) Real Photo:

Customer Reviews

Similar Products