3Dsway 3D Printer Part Xcr 2In1-V2 Color Switching Hotend Two Color Nv6 Heated 0.4/1.75 Volcano Nozzle 0.8 Silicone Sock And Fan
- Model NumberXcr 2In1-V2
- Item TypeHotend Kit
- Brand Name3Dsway
Please note: Only the NV6 hotend gives a silicone sock, because the silicone sock is not compatible with the Volcano hotend, so the Volcano hotend does not give a silicone sock.
Thank you for your understanding. Both hotend will give a cooling fan.
XCR 2IN1 Hotend new upgrade, the following is a comparison of XCR 2IN1-V1 and XCR 2IN1-V2 upgrades.
1. The heatsink is increased from 7 teeth to 11 teeth, Making heat dissipation faster.
2. The overall size is smaller and more convenient to install.
3. The fixed hole is upgraded from the back of the 2IN1-V1 to the right of the 2IN1-V2. Making it easier to load and unload the module.
4. XCR-NV6 heating block, compatible with a variety of temperature measurement methods.
Model: XCR 2IN1-V2 Color Switching Hotend
Filament size: 1.75mm
Nozzle size: 0.4mm(NV6 hotend), 0.8mm(Volcano hotend)
Feeding type: Long-distance feeding
Suitable extruders: Bulldog, Titan, MK8, etc.
Main Body Size: 30*30*62mm
Main material: Aluminum alloy
XCR 2IN1-V2 Color Switching Hotend Compared with XCR 2IN1-V1 , the size of XCR 2IN1-V2 is reduced, the heat dissipation area is increased, and the distance for retreating is shortened, which make the printing quality effectively improved, the operation more flexible, the printing time shortened, and the work efficiency improved.
1. The shape is small and exquisite, and the installation is simple. The fan installation holes are reserved for fixing. The side of the top hole of the throat is installed to make the hotend replacement simple and convenient;
2. The main body size is 30mm*30mm*62mm, weight 57.1g, with good heat dissipation, light weight, and flexible color switching.
3、A variety of hot end for options. With different heating blocks, the conventional thermistors, high temperature thermistors, platinum thermistors and thermocouples can be used. Nozzle diameter of 0.4-1.0mm specifications are available to meet different needs. The advertising word printers are preferred.
4. The improved version of XCR-NV6 heating block supports a variety of temperature measurement methods, no need to replace the module.
5. NV6 heating block with silicone sleeve can enhance the insulation effect and prevent burns.
Precautions and operating instructions:
The firmware need to be modified to double extruder for normal operation.
1. For the first time, separate wire feeding is used. After the extruder 2 is smoothly discharge, it should be withdrawed by 34mm (Test according to different filament, here we test pla to get this result), and then the extruder 1 is feeding. After the filament is discharged smoothly, the G code can be imported and then to print. The subsequent steps are repeated for the subsequent printing, but the order of the extruders 1 and 2 should be adjusted according to the actual situation. (In fact, just need to comfirn the initial position of the two extruders)
2. Taking cura slice for example, setting the switching back waiting distance of 34mm, should be consistent with the manual retraction distance, the erasing tower setting is not less than 55mm⊃3;.
3. Before printing, make sure that the extruder 2 in the G code prefix has no action. The software prefix of each version is different, either modify the prefix code before slicing, or modify the G code prefix part after slicing.
4. The cooling fan can not be closed for a long time, please keep the fan on when starting heating. This product has built-in PTFE parts, can not be used for high temperature printing, the limit temperature