For customers fromEurope, Middle East, North America, Asia, Australia !
50000 RPM Non-Carbon Brushless for dental lab laboratory jewelry carving and industry Micromotor Polishing Unit handpiece NEW function: Speed controlled by the foot pedal ! Model:QZ-60 Input:220V /110V Output: 4A Power:150w Size: 20*20*8 Net Weight 2.25kg Brushless micromotor high quality and stable porformance With hand speed control and foot pedal speed control , much more convenivent One year quality warranty from the manufacturer! Precautions: 1, the machine has intelligent protection function, no connection handpiece, motor damage,controller failure, high temperature, will start the automatic protection system. Then the display window will flash. When protection occurs first turn off the power switch, carefully check the condition of the various parts, troubleshooting before use.
2, follow your power supply AC110V model or AC220V, it may cause the controller to burn
3, if the machine does not work, check the power cord, handpiece, whether the foot switchplugged in, whether the fuse burned power outlet, if it is over-temperature protection, and other equipment to lower the temperature before use
4, the device when not in use, turn off the power switch
5, try to protect the handpiece, the handpiece is very sophisticated equipment
6. Do not talk to control for other devices, otherwise it will cause the controller is not working properly or is damaged.
Instruction manual: 1- power socket: Connect to power line 2 Power fuse: fuse in the controller with automatic recovery function, when the motor current is too large or the use of force is too large, built-in recovery fuse is disconnected, so grinding machine handpiece to stop working, you need to turn off the main power switch for one minute after the restart 3 voltage switch: AC220V or AC110V, note voltage 110V AC220V can not be converted to use, otherwise it will damage the control panel, pay attention to the voltage 110V 220V can not be transferred, otherwise it will damage the control panel 4 speed foot switch Interface: The foot switch can choose any speed from 0 rpm to the speed control knob set 5 operation indicator: When running light is off, to be checked after voltage outlet fuse is disconnected, such as fuses off, you need to replace 2A fuse, can continue running. 6 main power switch 7 Knob Speed indicator: When the indicator light on the knob function is enabled speed.11 8 start and stop lights start and stop lights to indicate the handpiece is in working condition, when the light is off, the handpiece to stop working 9reverse indicator lights on behalf of reversal 10 Forward indicator lights representatives Forward 11 speed control knob speed control knob use to regular the speed, in the absence of the foot pedal , the handpiece speed will be in accordance with the rpm speed control knob settings, there is a foot switch , handpiece speed will be in according to foot pedal operation. 12 handpiece connector 13 foot pedal indicator lights, on behalf of the pedal speed control function is enabled, you can adjust speed through foot pedal 14 start /pause button 15 speed mode select button to choose knobs or foot pedal to control speed 16reversing button control handpiece Reversible