Instructions for use:
1, Select the appropriate voltage and connector for the electronic device to charge / power supply
2, Press the switch to start charging when your device connected with EPOWER; If you unplug the
cable, auto-sleep will start in one minute.
3, Five lights will flash circularly during the charging by EPOWER and all lights will keep bright when
your device is full-charged.
4, During the charging for your device, LED lights indicate the balance power of built-in battery of
EPOWER. Four lights indicate 80% balance, three lights indicate
60% balance, two lights indicate 40% balance and one light indicates 20% balance. The built-in
battery is empty when all LED lights start to flash.
5, Press the switch five seconds to start If you want to use LED for illumination and select the
status ( light, strobe, SOS, close) by pressing the switch to transform.
6, Store the product in a cool and dry place and away direct sunlight.
Some Questions Frequently Asked By Our Customers: Question 1: What functions does start power supply have?
Answer: the starter power is mainly used to charge the portableelectronic devices,such as mobile smart phone,tablets,portable gaming,systems,digital cameras,camcorders,bluetoothheadsets,portable GOS devices,and any other DC 5V powered electronic devices.It can also jump start a drained car battery with the jumo starter cables.There\'s also an included ultra-bright LED light that can be used as a flash light or SOS signal flashing light. Qutstion 2: How can LED emergency lighting be truned on?
Answer: Turn master switch of start power to "ON" and press"power button" for 3 seconds to start flashlight function. Afterwards, press "power button" LED function to turn normal on to flickering,SOS distress signal light; press "power button" to directly turn it off. Question 3:The start power supply has 19V and 12V output functions, how can V number be switched?
Answer: the start power supply can guarantee several V number selection. Before charging with start power supply,press "power button" for short time to switch among different V numbers and corresponding indicator light are normally on, Different products use different voltage, eg.: laptop generally have 19V and 16V. Before use, please confirm products V number. Question 4: How can an auto be started?
Answer: if an auto can not be started by the storage battery because of various reasons,the start power supply can exert supernatural effects.At first ,inspect electrical quantity of start power. Generally,the auto can be started when there is one check display of indicator light. Connect positive and negative polarise of storage battery with positive and negative polarities of storage battery. After red polarities and black polarities are clamped,insert plug of battery terminal into start outlet of start power,turn auto key to star auto. After start the auto,remove clamps from battery. Question 5:Will reversing polarity connections of the jump start cable damage the vehicle?
Answer: No,the start power is very safe with comprehensive protection, If you accidentally connect the red and black cable clamps to the wrong polarity terminal and attempt to jump start the vehicle,the fuse will be blown and will cut the power immediately to prevent injury and avoid damaging the vehicle. Question 6: What if it doesn\'t jump start the vehicle?
Answer: If the start power fails to jump start the engine,please wait at least 10 seconds before attempting to try again,it is also highly recommended to replace the vehicle battery once every 2 or 3 years. Question 7: How many times can the start power jump start a vehicle?
Answer: Approximately 20 times with a 100% fully charged battery.Results may vary depending on owner usage and vehicle engine displacement. Question 8: How can start power supply be charged?
Answer: turn product switch to "ON", Use home adapter or Car adapter connected to 220V(110V-240V) commercial power or 12V car powersupply,product will begin to charged. the indicator light will be flash all time. when four indicator light are on,it indicates the power supply has been full charged! Question 9: How long will it take to fully charge the start power to max capacity?
Answer: 5-6 hours.Depending on the current battery charge indicator, local voltage and local environment Question 10: How long is he start power\'s standby time?
Answer: The typical standby time of the start power is 3 months fully charged. It is recommened to charge the start power once every 3 months to prolong its service life.Result may vary depending on owner usage.