DC12V 6CH Receiver Board
1.Working Voltage: DC12V more or less
2.Current:Standby less than 10mA,Working less than 128mA
3.Working Temperature: -10\'C-+60\'C
4.Receiver Frequency: 315MHz/433MHZ
5.Receiving Sensitivity: -105dB
6.Output State: Switching Value
7.Max Load:10A Relay, Resistive load less than 8A,Inductive load less than 3A
8.Receiver Board Size:55*31*16mm
Encoding Type: Learning Code, Add transmitter by the Learning Button on the receiver
Output State: It is adjusted by the Jumper on the Receiver Board, (before you change it .you need turn OFF the power. Until you have changed it, then turn ON the power again, or the State will not be changed)
Momentary----------Jumper on “M & Mid Pin”
Toggle----------------Jumper “T & Mid Pin”
Latched--------------Take away the Jumper or put the Jumper on 1 Pin
Momentary------------Press the Transmitter button A, the receiver relay A is ON, release button A; the receiver relay A is OFF, the same as B/C/D/E/F. 6CH are independent.
Toggle---------------Press transmitter button A for 1 time, the receiver relay A is ON, press button A again, the receiver relay A is OFF, the same as B/C/D/E/F. 6CH are independent.
Press transmitter button A, the receiver relay A is ON, the relay B/C/D/E/F is OFF.
Press transmitter button B, the receiver relay B is ON, the relay A/C/D/E/F is OFF.
Press transmitter button C, the receiver relay C is ON, the relay A/B/D/E/F is OFF
Press transmitter button D, the receiver relay D is ON, the relay A/B/C/E/F is OFF.
The same as Button E/F
It also mean .Latched only can keep 1CH ON .and it will often have 1CH is ON.
Input power for the Receiver .Press the Learning Button until the Led indicator ON. Then press transmitter, the Led indicator flash fast, it mean learning successfully.
Keeping press the Learning Button on the receiver until the LED indicator ON and flash fast, it mean the code have been cleared successfully.