Using voltage: AC220V
The maximum power: 10000W
Voltage regulation: 0-100% (Adjusted 220V in 100 classes , nonlinear)
Some buyers misunderstand our product, so pls grasp the notes before ordering!
Notes:10000W products are not in proportion to the regulator, so called nonlinear,digits show 0-100. When digit show 1, voltage about 20V,the higher voltage, the more careful between the level and the level classification;
Level 180V-220V, voltage about 1-2V, 0-180V vlotage is higher, level bettween level is about 20V, the second level is bout 10V, the third level is bout 5V, the higher voltage, the more careful level classification, so it called nonlinearity!!!
Using the new two-way high-power thyristor, because current up to 80A, a good solution to the problem of over-current electric wire in the case of cooling is too small to cause the resistance;
You can easily adjust the output voltage mains in any adjustment 0-100% (220V 100 adjustment points, non-linear), for the use of electrical appliances. Such as: electric furnace, water heater of heat, the lamps and lanterns that move light, small motor, solder iron temperature adjustment, etc. So as to achieve the dimming, thermal control, the effect of the surge tank.
Which could be used for those power less than 10,000W large appliances,since the power has been great, so the general home appliances or small factories enough to use.
1 X 10000W Voltage Regulator