How to use the machine:
1 hand-pressure plastic bag sealing machine without power switch (automatic control). The AC power cord into the outlet, according to the sealing material and the thickness of the material, adjust the heating time. The plastic bag sealing surface, then press the handle, the circuit automatically controls the heating time. When the power goes out, the power will be automatically disconnected. After about 1-2 seconds, release the handle on the sealing Well!
2 square seal an access point when the damage occurs, it is because the heating time is too long, please dial counterclockwise rotation, shortening the heating time can be!
3 If the seal is not strong, it is because the heating time is too short. Keep the knob clockwise, longer heating time can be ok!
4 If the plastic bag stuck to the rubber platen cooling time is not enough explanation, we must extend the cooling time after the light goes out. Let go a little bit later is ok!
5 After adjusting the heating time, when you use should remain unchanged, in continuous use, does not require any adjustment
6 Hand impulse sealer can always talk about the power plugged in, the power consumption when not working Needless!