Backlight 433Mhz Wireless Keypad Universal Remote Controller Password Switch For Gate Door Access Control Hcs101 Standard Format

Backlight 433Mhz Wireless Keypad Universal Remote Controller Password Switch For Gate Door Access Control Hcs101 Standard Format
  • SellerHOMTECH Store
  • List Price$39.00Piece
  • Avg. Price$28.16Piece
  • Your Price$27.69Piece
  • ShipmentFree Shipping
  • You Save$11.31Piece29.00% OFF
  • Updated3 Days Ago
  • ColorBlueBlack
  • PromotionGet additional $1 off when buy $19 or moreGet additional $2 off when buy $37 or more
  • View OfferBuy from AliExpress

Price Monitor

Price Type
Desired Price$
Your Email
Sign up for price drop alerts
We are the leading aliexpress shopping assistant help you buy factory direct goods at unbeatable price.
Product prices and availability are accurate as of time indicated and are subject to change.

Price History

Product Details

  • Model NumberKp-01
  • Security ModeFail Safe
  • DirectionNone
  • MaterialPlastic
  • Size85X75X35Mm
  • Encoding FormatHcs101 Standard Format
  • Working Frequency433.92 Mhz

Product Description

Specifications:


Product description:
-This is a dual channel transmitters that are activated only after having entered a Suitable combination.

-The units are designed for installation in indoor or outdoor locations that ensures the utmost security because the transmitted code is changed at each transmission session.

-The estimated transmission range is 200 m in open space and 35 m indoors
-The units are designed to ensure battery life equivalent to an estimated 2 years of operation considering 10 transmissions/day

Installation:

-Before physically installing the it in their mouning position it is good practice to perform a practical test to assess their functionality and effective range.

-Consider that range may be up to 25 or 30% less when battery power is low

positioning:
-Apart from the distance from the receiver, the units should not be positioned in the vicinity of or-worsestill-in contact with metal structures, which could otherwise exert a signal shielding effect. Thanks to the enclosure protection rating of IP 54, the digital selectors can be installed outdoors if required.

Audible signal status:

-1 short beep -Keypad tone -1 long beep -Modification of combination confirmed (or send the signal after enter the correct password ) -5 short beeps -Error during combination input or combination edit operation -2 low beeps -Battery low warning signal New batteries required

Method of use
-The use of the keypad is based on "combinations", i.e. numbers of from 1 to 9 digits that the user is required to key in by means of the keys.Once the combination has been entered the user then presses confirm key3 or 4 to transmit the activation command to respectively.
-Receiver channel 1 if the user presses3
-Receiver channel 2 if the user presses4

-The command will be transmitted only when a valid combination has been entered ,if an incorrect combination has been entered the selector will emit an error, warning signal when the confirom key is pressed

-The combination entered must be exact,if, for example:the correct combination is 0422, the following attempts will be interpreted as errors:422,10422, 04222

- Therefore, if the user inadvertently presses the wrong key, when entering a combination, combination key3 or 4 should be pressed immedliately to generate the error tone,after which the correct c ombination can be entered starting from the beginning again
-While entering the combination no more than 6 seconds can be allowed to elapse between keystrokes,after which interval the combination must be re-entered starting from the beginning.

-The units are factory programmed with a standard combination to activate channel one and a standar combination for channel two


The factory set combinations are as follows: -1a combination to transmit the code associated with the 3 key
-When the unit is used for the first time this combination is11 -2a combination to transmit the code associated with the 4 key
-When the unit is used for the first time this combination is 22

Backlight 433Mhz Wireless Keypad Universal Remote Controller Password Switch For Gate Door Access Control Hcs101 Standard Format

Backlight 433Mhz Wireless Keypad Universal Remote Controller Password Switch For Gate Door Access Control Hcs101 Standard Format

Backlight 433Mhz Wireless Keypad Universal Remote Controller Password Switch For Gate Door Access Control Hcs101 Standard Format

Backlight 433Mhz Wireless Keypad Universal Remote Controller Password Switch For Gate Door Access Control Hcs101 Standard Format

Backlight 433Mhz Wireless Keypad Universal Remote Controller Password Switch For Gate Door Access Control Hcs101 Standard Format

Backlight 433Mhz Wireless Keypad Universal Remote Controller Password Switch For Gate Door Access Control Hcs101 Standard Format


Backlight 433Mhz Wireless Keypad Universal Remote Controller Password Switch For Gate Door Access Control Hcs101 Standard Format

Backlight 433Mhz Wireless Keypad Universal Remote Controller Password Switch For Gate Door Access Control Hcs101 Standard Format

Backlight 433Mhz Wireless Keypad Universal Remote Controller Password Switch For Gate Door Access Control Hcs101 Standard Format

Backlight 433Mhz Wireless Keypad Universal Remote Controller Password Switch For Gate Door Access Control Hcs101 Standard Format

Specifications:


Product description:
-This is a dual channel transmitters that are activated only after having entered a Suitable combination.

-The units are designed for installation in indoor or outdoor locations that ensures the utmost security because the transmitted code is changed at each transmission session.

-The estimated transmission range is 200 m in open space and 35 m indoors
-The units are designed to ensure battery life equivalent to an estimated 2 years of operation considering 10 transmissions/day

Installation:

-Before physically installing the it in their mouning position it is good practice to perform a practical test to assess their functionality and effective range.

-Consider that range may be up to 25 or 30% less when battery power is low

positioning:
-Apart from the distance from the receiver, the units should not be positioned in the vicinity of or-worsestill-in contact with metal structures, which could otherwise exert a signal shielding effect. Thanks to the enclosure protection rating of IP 54, the digital selectors can be installed outdoors if required.

Audible signal status:

-1 short beep -Keypad tone -1 long beep -Modification of combination confirmed (or send the signal after enter the correct password ) -5 short beeps -Error during combination input or combination edit operation -2 low beeps -Battery low warning signal New batteries required

Method of use
-The use of the keypad is based on "combinations", i.e. numbers of from 1 to 9 digits that the user is required to key in by means of the keys.Once the combination has been entered the user then presses confirm key3 or 4 to transmit the activation command to respectively.
-Receiver channel 1 if the user presses3
-Receiver channel 2 if the user presses4

-The command will be transmitted only when a valid combination has been entered ,if an incorrect combination has been entered the selector will emit an error, warning signal when the confirom key is pressed

-The combination entered must be exact,if, for example:the correct combination is 0422, the following attempts will be interpreted as errors:422,10422, 04222

- Therefore, if the user inadvertently presses the wrong key, when entering a combination, combination key3 or 4 should be pressed immedliately to generate the error tone,after which the correct c ombination can be entered starting from the beginning again
-While entering the combination no more than 6 seconds can be allowed to elapse between keystrokes,after which interval the combination must be re-entered starting from the beginning.

-The units are factory programmed with a standard combination to activate channel one and a standar combination for channel two


The factory set combinations are as follows: -1a combination to transmit the code associated with the 3 key
-When the unit is used for the first time this combination is11 -2a combination to transmit the code associated with the 4 key
-When the unit is used for the first time this combination is 22

Backlight 433Mhz Wireless Keypad Universal Remote Controller Password Switch For Gate Door Access Control Hcs101 Standard Format

Backlight 433Mhz Wireless Keypad Universal Remote Controller Password Switch For Gate Door Access Control Hcs101 Standard Format

Backlight 433Mhz Wireless Keypad Universal Remote Controller Password Switch For Gate Door Access Control Hcs101 Standard Format

Backlight 433Mhz Wireless Keypad Universal Remote Controller Password Switch For Gate Door Access Control Hcs101 Standard Format

Backlight 433Mhz Wireless Keypad Universal Remote Controller Password Switch For Gate Door Access Control Hcs101 Standard Format

Backlight 433Mhz Wireless Keypad Universal Remote Controller Password Switch For Gate Door Access Control Hcs101 Standard Format


Backlight 433Mhz Wireless Keypad Universal Remote Controller Password Switch For Gate Door Access Control Hcs101 Standard Format

Backlight 433Mhz Wireless Keypad Universal Remote Controller Password Switch For Gate Door Access Control Hcs101 Standard Format

Backlight 433Mhz Wireless Keypad Universal Remote Controller Password Switch For Gate Door Access Control Hcs101 Standard Format

Specifications:
Material Power Encoding format

Product description:
-This is a dual channel transmitters that are activated only after having entered a Suitable combination.

-The units are designed for installation in indoor or outdoor locations that ensures the utmost security because the transmitted code is changed at each transmission session.

-The estimated transmission range is 200 m in open space and 35 m indoors
-The units are designed to ensure battery life equivalent to an estimated 2 years of operation considering 10 transmissions/day

Installation:

-Before physically installing the it in their mouning position it is good practice to perform a practical test to assess their functionality and effective range.

-Consider that range may be up to 25 or 30% less when battery power is low

positioning:
-Apart from the distance from the receiver, the units should not be positioned in the vicinity of or-worsestill-in contact with metal structures, which could otherwise exert a signal shielding effect. Thanks to the enclosure protection rating of IP 54, the digital selectors can be installed outdoors if required.

Audible signal status:

-1 short beep -Keypad tone -1 long beep -Modification of combination confirmed (or send the signal after enter the correct password ) -5 short beeps -Error during combination input or combination edit operation -2 low beeps -Battery low warning signal New batteries required

Method of use
-The use of the keypad is based on "combinations", i.e. numbers of from 1 to 9 digits that the user is required to key in by means of the keys.Once the combination has been entered the user then presses confirm key3 or 4 to transmit the activation command to respectively.
-Receiver channel 1 if the user presses3
-Receiver channel 2 if the user presses4

-The command will be transmitted only when a valid combination has been entered ,if an incorrect combination has been entered the selector will emit an error, warning signal when the confirom key is pressed

-The combination entered must be exact,if, for example:the correct combination is 0422, the following attempts will be interpreted as errors:422,10422, 04222

- Therefore, if the user inadvertently presses the wrong key, when entering a combination, combination key3 or 4 should be pressed immedliately to generate the error tone,after which the correct c ombination can be entered starting from the beginning again
-While entering the combination no more than 6 seconds can be allowed to elapse between keystrokes,after which interval the combination must be re-entered starting from the beginning.

-The units are factory programmed with a standard combination to activate channel one and a standar combination for channel two


The factory set combinations are as follows: -1a combination to transmit the code associated with the 3 key
-When the unit is used for the first time this combination is11 -2a combination to transmit the code associated with the 4 key
-When the unit is used for the first time this combination is 22
-This is a dual channel transmitters that are activated only after having entered a Suitable combination.

-The units are designed for installation in indoor or outdoor locations that ensures the utmost security because the transmitted code is changed at each transmission session.

-The estimated transmission range is 200 m in open space and 35 m indoors
-The units are designed to ensure battery life equivalent to an estimated 2 years of operation considering 10 transmissions/day

Installation:

-Before physically installing the it in their mouning position it is good practice to perform a practical test to assess their functionality and effective range.

-Consider that range may be up to 25 or 30% less when battery power is low

positioning:
-Apart from the distance from the receiver, the units should not be positioned in the vicinity of or-worsestill-in contact with metal structures, which could otherwise exert a signal shielding effect. Thanks to the enclosure protection rating of IP 54, the digital selectors can be installed outdoors if required.

Audible signal status:

-1 short beep -Keypad tone -1 long beep -Modification of combination confirmed (or send the signal after enter the correct password ) -5 short beeps -Error during combination input or combination edit operation -2 low beeps -Battery low warning signal New batteries required

Method of use
-The use of the keypad is based on "combinations", i.e. numbers of from 1 to 9 digits that the user is required to key in by means of the keys.Once the combination has been entered the user then presses confirm key3 or 4 to transmit the activation command to respectively.
-Receiver channel 1 if the user presses3
-Receiver channel 2 if the user presses4

-The command will be transmitted only when a valid combination has been entered ,if an incorrect combination has been entered the selector will emit an error, warning signal when the confirom key is pressed

-The combination entered must be exact,if, for example:the correct combination is 0422, the following attempts will be interpreted as errors:422,10422, 04222

- Therefore, if the user inadvertently presses the wrong key, when entering a combination, combination key3 or 4 should be pressed immedliately to generate the error tone,after which the correct c ombination can be entered starting from the beginning again
-While entering the combination no more than 6 seconds can be allowed to elapse between keystrokes,after which interval the combination must be re-entered starting from the beginning.

-The units are factory programmed with a standard combination to activate channel one and a standar combination for channel two


The factory set combinations are as follows: -1a combination to transmit the code associated with the 3 key
-When the unit is used for the first time this combination is11 -2a combination to transmit the code associated with the 4 key
-When the unit is used for the first time this combination is 22


Installation:

-Before physically installing the it in their mouning position it is good practice to perform a practical test to assess their functionality and effective range.

-Consider that range may be up to 25 or 30% less when battery power is low

positioning:
-Apart from the distance from the receiver, the units should not be positioned in the vicinity of or-worsestill-in contact with metal structures, which could otherwise exert a signal shielding effect. Thanks to the enclosure protection rating of IP 54, the digital selectors can be installed outdoors if required.

Audible signal status:

-1 short beep -Keypad tone -1 long beep -Modification of combination confirmed (or send the signal after enter the correct password ) -5 short beeps -Error during combination input or combination edit operation -2 low beeps -Battery low warning signal New batteries required

Method of use
-The use of the keypad is based on "combinations", i.e. numbers of from 1 to 9 digits that the user is required to key in by means of the keys.Once the combination has been entered the user then presses confirm key3 or 4 to transmit the activation command to respectively.
-Receiver channel 1 if the user presses3
-Receiver channel 2 if the user presses4

-The command will be transmitted only when a valid combination has been entered ,if an incorrect combination has been entered the selector will emit an error, warning signal when the confirom key is pressed

-The combination entered must be exact,if, for example:the correct combination is 0422, the following attempts will be interpreted as errors:422,10422, 04222

- Therefore, if the user inadvertently presses the wrong key, when entering a combination, combination key3 or 4 should be pressed immedliately to generate the error tone,after which the correct c ombination can be entered starting from the beginning again
-While entering the combination no more than 6 seconds can be allowed to elapse between keystrokes,after which interval the combination must be re-entered starting from the beginning.

-The units are factory programmed with a standard combination to activate channel one and a standar combination for channel two


The factory set combinations are as follows: -1a combination to transmit the code associated with the 3 key
-When the unit is used for the first time this combination is11 -2a combination to transmit the code associated with the 4 key
-When the unit is used for the first time this combination is 22


Audible signal status:

-1 short beep -Keypad tone -1 long beep -Modification of combination confirmed (or send the signal after enter the correct password ) -5 short beeps -Error during combination input or combination edit operation -2 low beeps -Battery low warning signal New batteries required

Method of use
-The use of the keypad is based on "combinations", i.e. numbers of from 1 to 9 digits that the user is required to key in by means of the keys.Once the combination has been entered the user then presses confirm key3 or 4 to transmit the activation command to respectively.
-Receiver channel 1 if the user presses3
-Receiver channel 2 if the user presses4

-The command will be transmitted only when a valid combination has been entered ,if an incorrect combination has been entered the selector will emit an error, warning signal when the confirom key is pressed

-The combination entered must be exact,if, for example:the correct combination is 0422, the following attempts will be interpreted as errors:422,10422, 04222

- Therefore, if the user inadvertently presses the wrong key, when entering a combination, combination key3 or 4 should be pressed immedliately to generate the error tone,after which the correct c ombination can be entered starting from the beginning again
-While entering the combination no more than 6 seconds can be allowed to elapse between keystrokes,after which interval the combination must be re-entered starting from the beginning.

-The units are factory programmed with a standard combination to activate channel one and a standar combination for channel two


The factory set combinations are as follows: -1a combination to transmit the code associated with the 3 key
-When the unit is used for the first time this combination is11 -2a combination to transmit the code associated with the 4 key
-When the unit is used for the first time this combination is 22


Method of use
-The use of the keypad is based on "combinations", i.e. numbers of from 1 to 9 digits that the user is required to key in by means of the keys.Once the combination has been entered the user then presses confirm key3 or 4 to transmit the activation command to respectively.
-Receiver channel 1 if the user presses3
-Receiver channel 2 if the user presses4

-The command will be transmitted only when a valid combination has been entered ,if an incorrect combination has been entered the selector will emit an error, warning signal when the confirom key is pressed

-The combination entered must be exact,if, for example:the correct combination is 0422, the following attempts will be interpreted as errors:422,10422, 04222

- Therefore, if the user inadvertently presses the wrong key, when entering a combination, combination key3 or 4 should be pressed immedliately to generate the error tone,after which the correct c ombination can be entered starting from the beginning again
-While entering the combination no more than 6 seconds can be allowed to elapse between keystrokes,after which interval the combination must be re-entered starting from the beginning.

-The units are factory programmed with a standard combination to activate channel one and a standar combination for channel two


The factory set combinations are as follows: -1a combination to transmit the code associated with the 3 key
-When the unit is used for the first time this combination is11 -2a combination to transmit the code associated with the 4 key
-When the unit is used for the first time this combination is 22 The factory set combinations are as follows: -1a combination to transmit the code associated with the 3 key
-When the unit is used for the first time this combination is11 -2a combination to transmit the code associated with the 4 key
-When the unit is used for the first time this combination is 22

Backlight 433Mhz Wireless Keypad Universal Remote Controller Password Switch For Gate Door Access Control Hcs101 Standard Format

Backlight 433Mhz Wireless Keypad Universal Remote Controller Password Switch For Gate Door Access Control Hcs101 Standard Format

Backlight 433Mhz Wireless Keypad Universal Remote Controller Password Switch For Gate Door Access Control Hcs101 Standard Format

Backlight 433Mhz Wireless Keypad Universal Remote Controller Password Switch For Gate Door Access Control Hcs101 Standard Format

Backlight 433Mhz Wireless Keypad Universal Remote Controller Password Switch For Gate Door Access Control Hcs101 Standard Format

Backlight 433Mhz Wireless Keypad Universal Remote Controller Password Switch For Gate Door Access Control Hcs101 Standard Format


Backlight 433Mhz Wireless Keypad Universal Remote Controller Password Switch For Gate Door Access Control Hcs101 Standard Format

Backlight 433Mhz Wireless Keypad Universal Remote Controller Password Switch For Gate Door Access Control Hcs101 Standard Format

Backlight 433Mhz Wireless Keypad Universal Remote Controller Password Switch For Gate Door Access Control Hcs101 Standard Format

Backlight 433Mhz Wireless Keypad Universal Remote Controller Password Switch For Gate Door Access Control Hcs101 Standard Format

Backlight 433Mhz Wireless Keypad Universal Remote Controller Password Switch For Gate Door Access Control Hcs101 Standard Format

Backlight 433Mhz Wireless Keypad Universal Remote Controller Password Switch For Gate Door Access Control Hcs101 Standard Format

Customer Reviews

Similar Products