The new 260A configuration profile:
260A is a best price configuration, but many configuration does not poor, 260A also had more strength to engage the fourth generation star hub and the second generation wasteland tire, the remote controller is a standard no screen adjusting knob type 2.4G remote control, the use of damping as 6MM metal damping, the same as the 290 series of shock, it should be said that although the Standard Version, we use is as the metal shell 29 series of differential, eliminate the core weaknesses.
260A configuration list
1.Rovan 26CC 34mm powerful 2T engine cylinder head.
The new upgrade walbro 668B carburetor
The use of 1:25 gasoline engine oil (oil level according to the mixing ratio of fine distribution)
Maximum speed: 65km/h
2, LxWxH: 817x480x255mm
3, the wheelbase is 570mm
4, rear wheel drive
5, the rear axle brake
6, 15KG metal gear servo for throttle control
7, 40KG metal gear steering servo
8, the original silencer exhaust box
9, metal differential
10, the new upgraded four generation two generation wasteland tire hub
11, the 6mm damping
12, 6V2000 Ma battery
13, no screen knob to adjust the 2.4G remote control
Note: Read the instructions carefully before use, we have upgraded the engine air filter cotton,before use the air filter oil evenly coated in the center of the air filter cotton, to protect the engine better in the desert and the dusty ground from damage, often to keep the air filter cleaning, you can use detergent for cleaning and washing powder.
260A 5B models the front by hanging up and down around the composition, the use of 6MM metal damping, a damping spring bottom bracket using the metal bottom supporter strengthen the supporting force, in front of the front with a front elevation guard plate and the buffer frame, can withstand a certain amount of impact.
Each side suspension is independent support, the so-called independent suspension system, adapter six angle adapter, contact surface, reduce the damage to the wheel hub buffer.
The main frame chassis for 6061T6 aluminum self made, the chassis side protection using stolen light treatment, reduce the weight of its own.
Use the brake system to drive to the lever principle, the sandwich type brake block is composed of drive shaft brake disc, brake mode.
The use of 6MM after the shock, after the shock using double reed buffer, buffer separating spring middle support full use of all metal, the higher intensity, the exhaust pipe silencer using black box, the current sound minimum exhaust pipe.
Engine for hand pulling starting mode, with starting step, please read the manualoperation, the fuel ratio according to the standard oil ratio the ratio of 1 to 25, is the FB level oil proportion plan, suggestion choice FD grade oil ratio of the higher level.
The power switch Baja is located in hand side close to the head office under the chassis, a power switch indication sticker, right turn on the power supply method and closed, please read the instructions.