Batteries often fail because ?sulfates? slowly develop and cover the battery plates. This
sulfating process also weakens the electrolyte and this combined with the gradual coating
of the plates slowly and almost imperceptibly reduces the battery?s ability to receive, store
and then deliver power. This sulfating process gradually impairs battery function and causes
a capacity loss until the battery can no longer perform the desired task and so the battery is
deemed to have ?failed?. However using an Auto Pulse Battery Desulfator can reverse the process
by dissolving the sulfates, cleaning the plates and restoring the electrolyte strength so improving
a battery?s life and capacity for an extended period. The Auto Pulse Battery Desulfator/Rejuvenator
/Recovery unit uses no external power and generates a high-frequency pulse to dissolve batteries
The High-frequency Peak Pulse delivers an electronically controlled pulse to the battery causing crystalline
sulfates to dissolve back into the electrolyte and so restoring battery function and electrolyte strength
regaining the batteries ability to receive charging current and deliver discharge current.
Many desulfator products use an old technology inductor design to generate the pulse to desulfate a
battery. This old technology creates a harsh inductor peak that can be damaging to the battery plates.
Utilising our new capacity pulsing method a ?soft? peak is generated so dissolving sulfates without
damaging the battery plates.
Old technology also requires a large inductor so necessitating a physically large desulfator device
whereas using our advanced technology design the Auto Pulse Desulfator device is very compact yet
provides BIG performance.
NEW CYCLIC PULSING FUNCTION
In a similar manner to a Pulse battery charger (charge ? rest ?charge ?rest etc) a cyclic desulfating pulse function (pulse ? rest ? pulse ? rest etc) optimizes a batteries recovery process. This method of desulfation has been implemented in the new
Auto Pulse Desulfator
AUTO PULSE DESULFATOR BENEFITS:
Increases Battery Power
Extends Battery Life
Battery Charge Faster
Prevents Sulfate Build-up
Fully Automatic voltage selection. 12V 24V 36V and 48V
New Cyclic pulse generation method for improved capacity recovery
?Soft? Peak Pulsin
Auto cutoff function to prevent over discharge of battery
User Configurable override for manual voltage selection:
Just Red terminal connect to battery positive and black terminal to battery negative. And Auto Pulse
Battery Desulfator can cutoff when battery?s voltage is low.
MANUAL VOLTAGE SELECTION
If the battery voltage is very low the automatic voltage selection may fail to set the correct voltage.
In this instance it is possible to manually set the desired operating voltage. By pressing the voltage
select button. The LED screen will first display the working voltage and if you want to then alter the
working voltage setting just presses the key again and the unit will change to next value. After setting
the desired voltage the display will switch off to conserve battery power.
Auto-setting for 12-48V battery
Working Amp: 20mA max
Peak Amp: 2A max
Peak Voltage: 60-100V
Pulse Frequency: 10,000HZ
LED light indicates when pulse working