How to use this paintless dent repair kits
1.Clean the dent with a clean wet cloth;
2.Mount the glue stick into the glue gun,pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes;
3.Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the
drawing gasket is, the larger the drawing force is); 4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue);
5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter);
6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;
7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen;
8. Clean the repaired place with a clean wet cloth.
1.High quality pdr tools.
2.automotive body repair tools.
3.2016 newest packing design, more conveniently taking and operating.
4. Each tool is high quality and good repution from professional user.
5. Faster making shipping and packing safety.
1pcs* T bar Hammer tool
18pcs* Blue Glue Tabs
Note : no glue gun
Other Buyer are Also Looking for The Below Products,Click On The Picture One By One: If you have any question,leave a message or contact us on aliexpress,thanks .