SoliDrop
Welcome, Guest Sign InSign Up

Cloudray 150W Co2 Laser Power Supply For Co2 Laser Engraving Cutting Machine Myjg-150 Led

Cloudray 150W Co2 Laser Power Supply For Co2 Laser Engraving Cutting Machine Myjg-150 Led
  • StoreCloudray Laser Store
  • List Price$175.00
  • Avg. Price$147.03
  • Your Price$143.50
  • You Save$31.5018.00%
  • Updated21 hours ago
  • Voltage110V220V
  • PromotionGet $5.00 off when buy $500.00 or moreGet $15.00 off when buy $1,000.00 or moreGet $45.00 off when buy $1,500.00 or more
  • View OfferBuy from AliExpress
Price Tracker
Price Type
Price Desired
$
Your Email
Create aliexpress price watches
Price History
Product Details
  • Brand NameCloudray
  • Model NumberMyjg-150 Led
  • Cooling WayForce-Air Cooling
  • DimensionL*w*h=305*161*91 (Mm)
  • UsageCo2 Laser Engraving Cutting Machine
  • Mtbf≥10000 Hours
  • Response Rate≤1Ms
  • ApplicationCutting & Engraving Acrylic,fabric,double Color Sheet And Rubber,etc
Product Description
1. Good compatibility: it can be applicable to 130-150W laser tube manufactured by various factories2. Quick response speed and effect,high performance,large cutting power,it also can prolong laser tube service life.3. Easy control: the start and stop of laser can be easily controlled by TTL level.4. The power supply has output open circuit protection.5. The power supply has TTL signal indication, water through signal indication and laser output indication.6. This power supply has the Buttonto test output laser manually.7. Application: Sculpture and cut acrylic,fabric,double color sheet and rubber etc.8. LED display:Indication its signal instructions and current instructions, which helps the user with fault diagnosis.
Cloudray 150W Co2 Laser Power Supply For Co2 Laser Engraving Cutting Machine Myjg-150 Led

Input Input Voltage AC220V(Need AC110V ,please specify ,when order) AC frequency 47 - 440HZ Max Input power 800W Max Input current 10A Output Max output voltage DC 28KV Max output current Efficiency >/=90%(Full load) MTBF >/=10000 Hours Response speed ≤ 1ms (Time from the TTL Signal is given to the output current up to 90% pre-setting current) Withstand Voltage Input-Output, Input-Enclosure: AC1500V 10mA 60S, Output cathode is connected with enclosure. Environment Operating temperature: (-10-40)degree Celsius,Relative humidity: ≤90% Cooling Forced air cooling (fan cooling) Notice: Please leave us message 110V or 220V is needed when place the order, thanks!

Cloudray 150W Co2 Laser Power Supply For Co2 Laser Engraving Cutting Machine Myjg-150 Led

Cloudray 150W Co2 Laser Power Supply For Co2 Laser Engraving Cutting Machine Myjg-150 Led


Cloudray 150W Co2 Laser Power Supply For Co2 Laser Engraving Cutting Machine Myjg-150 Led

Cloudray 150W Co2 Laser Power Supply For Co2 Laser Engraving Cutting Machine Myjg-150 Led

Model Model-Number Match Laser Tube Power Laser Type Link
Cloudray 150W Co2 Laser Power Supply For Co2 Laser Engraving Cutting Machine Myjg-150 Led

1. Laser Tube connection: (Refer to Power supply and laser Device's connection Diagram) High voltage terminal of Power supply should be connected to the positive pole of CO2 laser device. Current circuit of the power supply shall be connected to negative pole (laser output terminal) of laser device, through an ampere meter or directly.
2. Connection of control signal( Refer to Power supply and control board's connection Diagram) The control signal shall be reliably connected to control terminal of the power supply , after connecting the DAC output signal and TTL signal of external computer with the power supply, the laser device shall work as expected. If the laser lamp can not work properly, should check the control signal whether correct or not(include check the voltage specification and logic),if use PWM control as power control,make sure f≥20KHz,Amplitude (peak value) ≤5V,Check and protection switch WP connection is correct at same time.
3. Voltage of power input: Power input of the power supply shall be 220VAC/50Hz. If 110VAC required please specify when placing order.
4. Others: A group of protection switches are also reserved for detection of water switch, fan switch,open-enclosure protection and so on.

Cloudray 150W Co2 Laser Power Supply For Co2 Laser Engraving Cutting Machine Myjg-150 Led

Terminal Definition
1 2 3 4 5 6 TH TL WP G IN 5V Terminal definition as follow:
TH Input Signal Switch Light Control,High Level(>=3V)-Bright dipping,Low Level(
Customer Reviews
Related Products