Dc5-24V T1000S Sd Card Support Ws2801 Ws2811 Ws2812B Lpd6803 2048 Pixels Led Rgb Full Color Controller Spi Signal Output
- Item TypeRgb Controler
- FeaturesTouch Screen Rf Remote
- Applicable LightsNa
- Max. Load Power3
- Remote DistanceNa
- Power SourceDc
- Connection ModeNa
- Model NumberT-1000S
- Oscillation FrequencyNa
- Controled MethodNa
Working temperature :-30-85degree celsius
Working voltage:DC5V / DC7.5-24V
Signal port:3pin connect port
T-1000S System features
1.32-65536 Gray,Support software Gamma correction.
2.Support point, line, surface, rules and special-shaped handle.
3.Single-port output,can support 2048 pixels.
4.Multiple controllers can be cascaded together and work synchronous,
play back content stored in the SD card.
5.Compatible with single line or double line chips.
When T1000S controller load less than 512 pixels the frame rate can reach 30fps.
When T-1000s control more than 512 pixels the frame rate will slow down automatically.
Support IC (one IC symbolize a pixel point )
Definition of buttons
Features: 1. 256 Gray,Gamma correction processing software.
2. Support the rules and special-shaped handle.
3. Controller, a port output, may bring 1024/2048 light.
4. Off-line control, play back content stored in the SD card
5. T-1000C store a maximum of 16 documents
Note: The model T-1000S with one port output, When it control 512 pixels the speed can reach 30fps, more than 512 pixels, the frame speed will be slow down automatically Connection diagram:
Regulatory function button:
System architecture diagram: Specific parameters:
. Type: SD Card
. Capacity: 128MB-2GB
. File Format: FAT file format
. Store files: *.led
. Temperature :-40-85 Degree
. Volgate: DC5V / DC7.5-24V
. Power:3W Note:
To copy files to SD card, you must first format to the SD card, pay attention to is that each copy must be formatted before.
SD card must be formatted as "FAT" format. NOTE:For the TTL(SPI) signal, the controller signal ground must connect to the LED lamp ground directly.
T1000S Controller* 1piece
SD Card* 1piece
1. China Post Ordinary Small Packet Plus is very economy shipping method, this could be tracked only when the item is still in China, which means, it can not be tracked after it shows reaches destination airport. If you need to monitor the delivery in full scale, you can choose China Post Registered Air Mail.
2. China Post Ordinary Small Packet Plus tracking number can be tracked only on our shipper\'s website.
3. Once you choose to ship via China Post Ordinary Small Packet Plus, our promise delivery time is 90 days, if no receipt, we will refund. We do not accept any dispute saying that tracking number is invalid, or item not receipt claim within 60 days after shipment is made. Pls consider this point before you bidding, thanks.