Get rid of your cables!!!
Latest design wireless DMX512 receiver have a built-in rechargeable battery and the battery is renewable.
After a full battery charge time about 2 hours, sustainable work about 8-9 hours.
Users also can use the product while charging.
Receiver Rechargeable Built-in Battery
small size: 13.5cm x 2cm x 2cm (transmitter) ; 11cmx 2cmx 2cm(receiver)
No time delay during data transmission
7 groups ID code settable
Portable and easy to handle
one transmitter can control many receivers
Tricolor LED displaying
126 channels automatically jumping frequency, high anti-jamming ability to ensure working reliability.
7 groups ID code settable, user can use 7 groups individual wireless system without any interference with each other in the same place.
Built in rechargeable battery, battery can last about 8-9hours
Input voltage: 5VDC 500mA MIN.
Communication distance: 500M.
Work frequency section: 2.4GHz ISM band, 126 channels frequency section.
Max transmitting power rate: 20dBm.
Receiver sensitive: -94dBm.
Signal port: 3 pin male plug (for transmitter) & female plug (for receiver)
ID code and LED color corresponding correlation:
3: RED+GREED = YELLOW
5: RED+BLUE = PURPLE
6: GREEN+BLUE = CYAN
7: RED+GREED+BLUE = WHITE
Press key 1 time to indicate ID setting, press again to set ID, then ID value adding 1 each time by press.
LED constant lit up: no DMX or wireless signal
Red LED flash: transmitting
Green LED flash: Receiving
RF frequency------2. 400-2. 525G, total 126 channels, it is searching automatically.
ID Code------1-7 groups ID code, press "Key" for setting, it only can works under same ID code of transmitter and receiver.
1. Power on DMX512 wireless received board and transmitted board.
2. Press "Key" button to set same ID value of transmitted board and received board, please use different ID value if you need to use more than 1 group wireless system at the same time in the same place.
3. The red LED flashes when transmitter transmits DMX data by no interfered frequency section, then receiver changes communicated frequency section. Green LED flash till received corrected same ID value, LED flash more fast once DMX data more fast.
4. Communication was established correctly then.
DMX512 wireless receiver/transmitter transmits standard DMX512 protocol data(generated by console ) by wireless way, which solve lighting control issues of wireless transmitting completely between lighting controller and lighting, lighting and lighting and so on. It gets rid of relying on connecting cables completely.
And also can ensure without any time delay when signal data is transmitting, signal data is real time and reliable. This product adopts global free 2.4GHz ISM frequency band. High effective GFSK modulation,communication design is 126 channels jumping frequency, high anti-jamming ability.
Large literature performance,
Temporary stage performance,
City lighting system,
Bar lighting and so on.
Indoor use only.
Three(3) years, repair, free replacement except damaged artificially.
The manufacturer will not offer free service in warranty period if any repaired or uncapped had happened
It is better to return to manufacturer if repair is a must, do not do any repairing job unless qualified electrician.
The working condition should be under temperature -20~+45 degree, 10%~90%RH, no congelation, so as to ensure its lifetime.
It can not be covered by any superstratum, it should be swept periodical to prevent dust.
1 x DMX512 Wireless transmitter ( No built-in battery )
2 x DMX512 Wireless Receiver ( Built-in battery )
3 x Power Supply (please kindly inform us the power supply you need, or we will choose it all according to your country standard)