For 15g/h ceramic ozone generator,we have 220V,110V,if you need other voltage,pls do leave a message.
1 x ozone power (including mechanical potentiometer),
1 x ozone tube
2 x cooling water inlet/outlet connectors
PS. With different batch production,We have yellow and blue color ozone tube, the quality is the same. we will send you random for the color.
Ozone Concentration (mg/l)
Ozone Output (g/h)
Feeding by Oxygen (L/min)
-40 - -60 degrees Celsius
Outlet pressure:Less than or equal to 0.8 bar
Feeding by Air (L/min)
Air humidity: Less than ten percent
Air temperature: less than or equal to ten degrees Celsius
Ozone Power Characteristics:
Ozone Ceramic Tube Characteristics:
Low noise and high conversion efficiency in ozone .
discharge, power consumption rate is only 8 ~ 10KW.h/kgO3
same output, this ceramic ozone tube is smaller of 1/3-1/2 then others.
10% of its breakdown voltage,
ceramic sintering at high temperature, high precision internal grinding two
times processing, uniform discharge, 316L stainless steel electrode and tight
firmware, PTFE gas connector, corrosion-resistant high-purity fluorine
rubber ring seal, the external cooling using the latest aluminum alloy,
effective heat dissipation, long time ozone decay time, long life using, up to
board, their distance should be above10MM,
connected with the cooling aluminum alloy connector,the other line is
connected with one end of the stainless steel nail, two high-voltage lines
do not merge together, keep distance of more than 10MM.
voltage line should far from this high voltage line,at least 20MM above. The
others like current meter, voltage meter, PLC digital control should far from
a distance of 100MM,due to it will interference to their effective value.
fan blowing wind to the ceramic tube, another is the exhaust vent.
oxygen or air as the feeding. If feeding by oxygen,the flow of1-5L/MIN are
ok,and the highest ozone output can reach 18G/H, the highest concentration
can reach 85MG/L, If feeding by air, the air flow should be 40~50L/MIN
(choose the air compressor pump of 60-75L/MIN).
ozone tube life,but also can increase the ozone output concentration.You
can choose a suitable air drier from our store..
High voltage!!! Do not touch it when it working,it should be assembled in acase to avoid electric shock. The ozone generator need cooling,so you should assemble a fan to cool it to avoid breakdown.