Dslrkit 250M 10 Ports 8 Poe Switch Injector Power Over Ethernet 52V 120W Max140W + 52V 2.7A Ac Power Adapter
- StoreDSLRKIT Photography and Network Equipment Online Store
- List Price$42.99
- Avg. Price$36.74
- Your Price$42.99↗
- Updated18 hours ago
- View OfferBuy from AliExpress
- Model Number10 Ports 8 Poe Set
- Brand NameDslrkit
- Transmission Rate10/100Mbps
- Switch TypeEthernet
- Communication ModeFull-Duplex & Half-Duplex
- Number Of Interfaces10
Support EXTEND mode, max Network Cable length to 250 meters
NOTE. When Wall Mount 52V 120Watt(Max.140W)
(If you switch to the EXTEND mode, the Max allowable Network Cable length will increased to 250 meters. So we use 52V power adapter. This will avoids the power loss over the long distances, and will make sure the PoE IP Camera working.) (Please select according your device power consumption, in order to ensure device stable running, the total power consumption should not exceed 75watt of the power supply)
If your camera is with word “12V/PoE” as this picture shows, then please select this 52V PoE Switch, do not select 12V PoE Switch.
Because "12V/PoE" means it can offer power supply to camera via 12V DC port or 48V(or 52V) PoE Ethernet port
This is an Passive Power Over Ethernet of 5 port 10 / 100Mbps-T Ethernet switches, including 8 unsolicited PoE Ethernet ports and 2 Uplink ports. With an external 110V-240VAC to 52VDC power supply adapter, any one of the 8 port can provide output power, each Ethernet port can provide network transmission speeds of up to 10 / 100Mbps , with Cat5 / 5e / 6 network cable. Which compatible with IEEE 802.3af/at Mode-B(4,5+/7,8-) POE switch device, but it does NOT include the 802.3af/at compliant detection feature. It supplies power NO MATTER WHAT, so don't plug the "Power Link 1~8" side into anything that isn't ready for it.
This POE switch only support 10/100M connection, PoE ports do not support Gigabit ethernet connection, because "Power Link 1~8" port using 4,5,7,8 pin as power transfer, Please do not connect any "NONE PoE gigabit ethernet device and Uplink device" on "Power Link 1~8" port, this will damage your device.
Gigabit(1000Mbps) ethernet Uplink device can only access "Up link" port, Please do not access "Power Link 1~8", this will damage your device.
Compatible all 802.3af/at device as Wireless Access Point, IP Phone, IP camera, Gateway , Switch, or More.....
Specification: Standard IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3x Full-Duplex flow control Protocol CSMA/CD Ethernet Data Transfer Rate Ethernet: 10Mbps (Half Duplex) 20Mbps (Full Duplex) Fast Ethernet: 100Mbps (Half Duplex) 200Mbps (Full Duplex) IC Chips IC Plus IP178G Network Media(Cable) 10Base-T(EXTEND mode): UTP category 5e, 6 cable (maximum 250m) EIA/TIA-568 100Ω STP (maximum 250m) 100Base-TX:UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) PoE Power on RJ45 Power +: pin 4 & pin 5 ; Power -: pin 7 & pin 8 DC Output: 52V, Per port Max 1A or 50Watt, 8 POE ports Total Max. 120Watt Number of Ports 10 x 10/100Mbps Auto-Negotiation RJ45 ports with 8 PoE enabled (port-1 ~ port-8) Power Input AC Input: 110V ~ 240VAC, 50Hz ~ 60Hz. DC OutPut: 52V/2.7A Power Consumption 3.2 Watts (max. no PD connected) According to the actual power consumption of equipment Temperature Operation Temperature:0 ~40℃ (32 ~104℉) Storage Temperature: -40 ~70℃(-40 ~158℉) Humidity Storage Humidity 5%~90% non-condensing, Operating Humidity 10%~90% non-condensing Product Dimensions 197mm W x 73mm D x 32mm H RAM Register Capacity 64K bytes per device MAC Address List 1K entries per device Frame Forward Rate 10Mbps Ethernet: 14880pps/Port 100Mbps Ethernet: 14880pps/Port Item Included:
DSLRKIT MID8P2U-E250 10pots 8PoE Unsolicited(Passive) PoE switch x1
AC Power Adapter(DC OutPut: 52V/2.7A) x1
AC Power Cable x1
AC power plug is US or EU type,if you need other type (AU or UK),Please leave a message.
12 Months Warranty from the date of purchase.