1. Analog Signal driver,receive 1-10V dimming signal.
2. Single channel constant voltage output,Max.5A per channel.
3. Support active and passive to use.
4. With the self-test function, support short circuit and over current protection functions.
5. When the power turn off,it has memory function.
6. Custom-made available
According to the product connection diagram, active 0/1-10 v voltage regulator, or passive 1-10 v dimmer,LED load,power by positive and negative to connect to the right port, open the power supply, adjust the 0/1-10 v voltage regulator, so as to change the output of the controller, until get the satisfactory of LED output brightness.
When the [ Analog IN ]port breaking, controller all light output; When the[ Analog IN ] port two terminals short circuit, the output shut down.
1. No power from plug
2. At black mode 3. Overload Recovery 4. Incorrect connection 1 Change the socket
2. Change the running mote 3 Lighten load, react 4 Check the connection Remark:
1. please use the voltage 0/1-10V dimmer curve,otherwise it will smooth dimming directly impact LED. otherwise it will smooth dimming direct impact LED.
2.Voltage LED to load and controller of power supply, and must be in the input voltage range specified in the product.
3. if a bus is connected with many pieces of DM9135 dimming driver,please confirm the effective with good dimming switch load capacity.
1. Professional buying advice according to your needs. 2. Instant response to your inquiries. 3. Short lead-time, quick delivery. 4. Three years warranty for all of our products. 5. Samples orders, OEM/ODM orders are also welcomed.