1, before installation flush roads, will clean the impurities.
2. If water towers, select the adapted hydraulic solenoid valve, in order to avoid electromagnetic stuffy can not Sheung Shui to flow most too small.
3. Check the solenoid valve identification voltage control side grip and consistent power supply output voltage, check the filter is complete, the various parts of the body if not broken
Loss, flow direction consistent with the direction of the solenoid valve Heng head logo.
4, the solenoid valve should be installed in empty the contents of maintenance and avoid collateral damage other area city, pay attention to antifreeze, sunscreen, to prevent the cracking of the valve body aging and shorten life. When you install the coil facing up.
5. Never use a wrench and other workers that act on the coil and plastic parts. Solenoid valve piping interfaces at both ends should be kept in the same line, the two interfaces Do
The next dislocation forced to install, to ensure that the solenoid valve is not damaged during installation, the solenoid valve should be installed to ensure that the pipeline is not misplaced torque effect.
6. After installation, the power to detect
For automatic cleaning of electrical equipment, solar water heaters, garden irrigation, infrared sensors and Sanitary Ware, automatic meter (income) charges the water supply system, commonly used in the school canteen bathroom hot water outlet valve
Tip: normally closed solenoid valve is energized after opening the solenoid valve through the water work ---- This is normally closed.
Normally-open solenoid valve is energized through without water, power and close the solenoid valve is not working.
Pressure applied to the solenoid valve for the water supply --- This pressurized type.
No pressure solenoid valves are suitable for water low pressure / tank / water tower water supply solenoid valve is preferably in the tank or water tower below the outlet horizontal vertical distance of half a meter or more.
For solar, water heater dedicated
Filtering capabilities: removable cleaning filtration devices
Water pressure range: 0.02 ~ 0.8MPA
Control mode: AC220V
Connection: male thread
Material: plastic and copper
Color: white, black and silver tone
Dimensions: 6.7 x 6.7cm/2.63 x 2.63"(L x W)
The color of the Screw Caps will be sent randoml