1.Silkscreen logo, product model, features and production date. 2.Each module canbe traced.
1.Diode used Copper Jacket.
2.Shell used Aviation Aluminum Anodizing.
1.Industrial design, heat dissipation, control integrated structure.
1.Input power: 12V DC(7-12V).2.Support PWM/TTL, it can adjust 0.1%-100%.3.Weak Light Buttom, used for laser's test.
FAQ: 1. Where is the TTL port? I can only see the PWM? TTL and PWM is compatible and you can only choose one of them. It means that you can connect this module's PWM port to the PWM (or TTL) port on the control board of your engraver. But make sure the voltage supply of that port is DC 5V.
2. How can I connect this module to the my engraver? If you don't need the PWM function, you can directly connect the power port to Motor Port (12V, GND) on Eleksmaker board and leave the PWM port unconnected. User must read:
1. Laser module power is relatively large, only for industrial use, to prohibit the exposure of the eye, otherwise it will cause permanent blindness, the consequences at your own risk. 2. Do not use in flammable and gas atmospheres to avoid fire and explosion. 3. Prohibit children from exposure to this laser product. 4. Do not open the module to avoid damage. Can not processed metals, glass, stone, ceramics, jewelry, silver, reflective material, translucent material.
Carving wood / bamboo / paper / plastic / leather / rubber / horn.
Can cut paper-thin / light wood / sponge paper / felt / fabric / sticker.