Gsm Gprs Shield For Arduino With Antenna

Gsm Gprs Shield For Arduino With Antenna

Price Monitor

Price Type
Desired Price$
Your Email
Sign up for price drop alerts
We are the leading aliexpress shopping assistant help you buy factory direct goods at unbeatable price.
Product prices and availability are accurate as of time indicated and are subject to change.

Product Details

  • Is_CustomizedYes
  • Operating Temperature-40°C To +85 °C
  • Dissipation PowerLow
  • TypeLogic Ics
  • Supply VoltageDc9V
  • Model NumberGsm Shield
  • ConditionNew
  • ApplicationDiy
  • Place Of OriginChina (Mainland)
  • Brand NameTinysine

Product Description

The GPRS/GSM Shield provides you a way to use the GSM cell phone network to receive data from a remote location. The shield allows you to achieve this via any of the three methods:
Short Message Service Audio GPRS Service The GPRS Shield is compatible with all boards which have the same form factor (and pinout) as a standard Arduino Board. The GPRS Shield is configured and controlled via its UART using simple AT commands. Based on the SIM900 module from SIMCOM, the GPRS Shield is like a cell phone. Besides the communications features, the GPRS Shield has 12 GPIOs, 2 PWMs and an ADC.
Note:
Because SIM900 peak current more than 2A. This shield must work with a external DC9V power supply. If you are using MEGA2560. Just need to connect the middle pins of RX and TX jumpers to RX1 TX1 on Arduino Mega 2560. And change the code setting. Features Based on SIMCom\'s SIM900 Module Quad-Band 850 / 900/ 1800 / 1900 MHz - would work on GSM networks in all countries across the world. Control via AT commands - Standard Commands: GSM 07.07 & 07.05 | Enhanced Commands: SIMCOM AT Commands. Short Message Service - so that you can send small amounts of data over the network (ASCII or raw hexadecimal). Embedded TCP/UDP stack - allows you to upload data to a web server. Speaker and Headphone jacks - so that you can send DTMF signals or play recording like an answering machine. SIM Card holder and GSM Antenna - present onboard. 12 GPIOs, 2 PWMs and an ADC (all 2.8 volt logic) - to augment your Arduino. Low power consumption - 1.5mA(sleep mode) Industrial Temperature Range - -40°C to +85 °C Document:
Schematic
Test code

Please leave us a message to get the Schematic and Test code
or Download it here

tinysine dot com
The GPRS/GSM Shield provides you a way to use the GSM cell phone network to receive data from a remote location. The shield allows you to achieve this via any of the three methods:
The GPRS Shield is compatible with all boards which have the same form factor (and pinout) as a standard Arduino Board. The GPRS Shield is configured and controlled via its UART using simple AT commands. Based on the SIM900 module from SIMCOM, the GPRS Shield is like a cell phone. Besides the communications features, the GPRS Shield has 12 GPIOs, 2 PWMs and an ADC.
Note:
Document:
Schematic
Test code

Please leave us a message to get the Schematic and Test code
or Download it here

tinysine dot com

Customer Reviews

Similar Products