Signal coverage area : Package included: 1 x W-CDMA 2100MHz signal repeater.
1 x Power adapter(If you need other type of power adapter plugs, please leave a message,If there is no message, we send EU adapter, thank you!)
1 x Manual
1 x Yagi antenna
1 x 10 meters cable
1 x Indoor Antenna
How Booster/Repeater Works? Repeaters are designed to fulfill the idea of one and main principle: to fill the areas with the weak or bad signal and to amplify these low signals in order to provide you with the communication suitable for you. The repeater makes the signal stronger in places with poor signal coverage such as: 1) Underground areas: basements, parking lots, tunnels; 2) Other places where cellular signal is shielded by metal or concrete walls: offices, supermarkets, cinemas, hotels; 3) Places distant from the BTS like private houses. Steps that describe the work of Repeater. 1) The outside antenna receives the signal from the nearest mobile base station. 2) The outside antenna sends the received signal through the coax cable to the installed Repeater. 3) The Repeater accepts the low signal and improves it. 4) The improved signal goes to the inside antenna through the connection coax cable. 5) The inside antenna send the improved good signal to your mobile phone. Installation Approaches: 1) Fix up outdoor antenna reception on housetop or outside the window and point it to the signal tower. 2) Connect outdoor antenna to “BTS” port in repeater machine through cable. 3) Connect indoor antenna(s) to “MOBILE’ port in repeater machine through cable also. 4) Plug power adaptor into AC power socket and finish installation. Technique Supporting: 1) If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -50DBM. 2) If can not call out, please adjust the direction of outdoor antenna. 3) If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antennas have distance of 10 meters at least, with a wall between and not in a same horizontal line. Note :
Please check your outdoor signal condition before placing the bid.
if sometimes the signal is full,sometimes no signal again in your mobile,
or you couldn\'t call out when the signal is full,
it couldn\'t be used any booster in your environment.
Cell phone signal amplifier is impossible to ensure all environments are 100% effective,
because the SIGNAL is very complex, especially in the city,
no one can guarantee 100% available ,in some areas the signal is not necessarily,
some of the signal is reflected signals, even the signal display very well,
but the quality is poor, and have encountered a lot of environment can not be solved
with any booster.
The product will not work good if your outdoor signal is not good or bad .
We will not bear any responsibility of your outdoor antenna is not good .
Installation steps 1 around the use of mobile phones on the top of the building or to find the direction and position of the strongest signals, as the location of the installation outside antenna 2 after selecting the appropriate position will indoor ah you fixed on the wall or support
3 in related indoor location choosing appropriate location (this site for nearly power supply and outdoor antenna side rain sunscreen and well ventilated for best location) install indoor machine and fixed on the wall or support
4 will be introduced to the outside antenna is suing (OUTDOOR) interface links at this point and OUTDOOR antenna and indoor amplifier
May determine the installation position of indoor antenna fixed antenna
6 INDOOR antenna and received the INDOOR antenna amplifier connection end interface on the other end of receiving repeater machine INDOOR (INDOOR) port