Industrial Dkc-1A Stepper Motor Controller / Pulse Generator / Servo / Potentiometer Speed

Industrial Dkc-1A Stepper Motor Controller / Pulse Generator / Servo / Potentiometer Speed

Price Monitor

Price Type
Desired Price$
Your Email
Sign up for price drop alerts
We are the leading aliexpress shopping assistant help you buy factory direct goods at unbeatable price.
Product prices and availability are accurate as of time indicated and are subject to change.

Price History

Product Details

  • Is_CustomizedYes
  • Brand NameHongbang Motor
  • Motor TypeStepper Motor
  • Model NumberDkc-1A
  • Place Of OriginJiangsu, China (Mainland)

Product Description

 Industrial DKC-1A stepper motor controller / pulse generator / Servo / potentiometer speed

The Stepper motor speed control presets imported using the latest high-speed chip, and uses a combination of software and hardware methods to ensure the controller super anti-jamming performance. Simultaneously with reverse polarity protection, overvoltage protection, overcurrent protection, absolute guarantee controller in a variety of harsh factory environments safe operation. For the control of the stepper motor trip switch back and forth motion control, fixed-length control, speed control
 Industrial DKC-1A stepper motor controller / pulse generator / Servo / potentiometer speed

1, wide voltage input,5-32DC; 2, with anti-reverse power protection, overvoltage protection, overcurrent protection, complete protection of the safety controller 3, the signal input point for the bottom level input; 4, optimized S-curve acceleration 5, the output frequency can reach 20K 6, all opto-isolated inputs and outputs
7, the board planted potentiometer speed control, external potentiometer speed automatic switching 8, a variety of functions, set up a simple, functional and practical Have 4 kinds of Function modes : 1, Auto-round mode 2, Single Entry Mode 3, Single-Shot mode 4, Jog Mode
 Industrial DKC-1A stepper motor controller / pulse generator / Servo / potentiometer speed

1, Control applications I: (Auto roundtrip mode) A device at point A and point B to run back and forth between. After the device is powered on, the external trigger start running, equipment operation and to point A forward limit, the automatic reverse run to point B inversion limit after he runs forward to point A, and from this operation. Until the trigger to stop the motor stops running.Parameter settings: 1. Set SW1 = OFF, SW2 = OFF (automatic round-trip mode) 2. Onboard governor or an external potentiometer, adjust the appropriate speed. 2, Control applications II: (One-Shot mode) A device from point A to point B and then stop. Again to start the device from point A to point B to stop. After the device is powered on, the external trigger start running from the device to the point A to point B when the device is running forward limit, the device stops running, if started again, the device reaches from point A trigger point B, the device stops. Start A-> B stop, start, B-> A stop motion process. If the device is running the trigger to stop the motor immediately stops running.Parameter settings: 1. Set SW1 = OFF, SW2 = ON (Single mode) 2. Onboard governor or an external potentiometer, adjust the appropriate speed.
3, Control applications III: (Single Entry Mode) A device from point A to point B to point A return stop. After the device is powered on, the external trigger start running from the device to the point A to point B when the device is running forward limit, the device reverse rotation operation, when it reaches point A, the motor stops. Complete aA-> B-> A movement. If the device is running the trigger to stop the motor immediately stops running.Parameter settings: 1. Set SW1 = ON, SW2 = OFF (Single Entry Mode) 2. Onboard governor or an external potentiometer, adjust the appropriate speed. 4, Control applications IV: (jog mode) A completely external switch controller starts and stops, reversing. After the device is powered on, the end to the start input level motor runs forward, Bottom level revocation, the motor stops. To stop the bottom level of the input motor reverse run, Bottom level revocation, the motor stops. Parameter settings: 1 Set SW1 = ON, SW2 = ON (jog mode) 2. Board or an external potentiometer speed control, regulating the right speed. 1, Control applications I: (Auto roundtrip mode) A device at point A and point B to run back and forth between. After the device is powered on, the external trigger start running, equipment operation and to point A forward limit, the automatic reverse run to point B inversion limit after he runs forward to point A, and from this operation. Until the trigger to stop the motor stops running.Parameter settings: 1. Set SW1 = OFF, SW2 = OFF (automatic round-trip mode) 2. Onboard governor or an external potentiometer, adjust the appropriate speed. 2, Control applications II: (One-Shot mode) A device from point A to point B and then stop. Again to start the device from point A to point B to stop. After the device is powered on, the external trigger start running from the device to the point A to point B when the device is running forward limit, the device stops running, if started again, the device reaches from point A trigger point B, the device stops. Start A-> B stop, start, B-> A stop motion process. If the device is running the trigger to stop the motor immediately stops running.Parameter settings: 1. Set SW1 = OFF, SW2 = ON (Single mode) 2. Onboard governor or an external potentiometer, adjust the appropriate speed.
3, Control applications III: (Single Entry Mode) A device from point A to point B to point A return stop. After the device is powered on, the external trigger start running from the device to the point A to point B when the device is running forward limit, the device reverse rotation operation, when it reaches point A, the motor stops. Complete aA-> B-> A movement. If the device is running the trigger to stop the motor immediately stops running.Parameter settings: 1. Set SW1 = ON, SW2 = OFF (Single Entry Mode) 2. Onboard governor or an external potentiometer, adjust the appropriate speed. 4, Control applications IV: (jog mode) A completely external switch controller starts and stops, reversing. After the device is powered on, the end to the start input level motor runs forward, Bottom level revocation, the motor stops. To stop the bottom level of the input motor reverse run, Bottom level revocation, the motor stops. Parameter settings: 1 Set SW1 = ON, SW2 = ON (jog mode) 2. Board or an external potentiometer speed control, regulating the right speed.

Customer Reviews

Similar Products