Leadshine Dcs810 Brushed Servo Drive With Max 80 Vdc Input Voltage And 20A Peak Current

Leadshine Dcs810 Brushed Servo Drive With Max 80 Vdc Input Voltage And 20A Peak Current

Price Monitor

Price Type
Desired Price$
Your Email
Sign up for price drop alerts
We are the leading aliexpress shopping assistant help you buy factory direct goods at unbeatable price.
Product prices and availability are accurate as of time indicated and are subject to change.

Price History

Product Details

  • Brand NameLeadshine
  • Motor TypeDc Motor
  • Model NumberDcs810
  • Control ModeStep & Dir
  • Max Input Frequency500Khz
  • Input Voltage Range18 - 80 Vdc
  • Continuous Current10 A
  • Peak Current20 A
  • Logic Current Range7-15 Ma
  • Logic Voltage Range4-5 Vdc For Pulse Active High (Default)
  • Communication TypeRs232
  • Step Width2,500 Ns
  • Isolation Resistance500M Ohm

Product Description

Notice:
We only supply genuine Leadshine servo motor drive with reasonable price, if your budget is limit, please contact our service man online and he she will recommend you the low price other supplier.

DCS810 Brushed DC Servo Drive The DCS810 is a digital DC servo driver developed with DSP and high efficient MOSFET technologies. In position control, it\'s easy for the end users to change stepping drivers to the DCS810 without changing control systems, because its input command is PUL/DIR signal, which is compatible with that of stepping drivers. In low power motion control applications, performances of DC servo systems using the DCS810 are better than those of digital AC servo systems in velocity, precision, noise, stability, or at least as good as those of digital AC servo systems. However, the cost of the DCS810 stays at the price line of stepping driver, namely far lower than those of AC servo drivers.
Compared to the DCS810S, the DCS810 can accept differential control signals and differential encoder feedback signals, offering better anti-interference performances. Compared to the DB810A, parameter visible tuning tools make the DCS810 much easier to tune. The DCS810 is very easy to tune and all parameters are visible. Parameter visible tuning tools, including Pro Tuner (Windows based setup software) and STU (Small servo tuning unit) can meet different tuning environments or requirements. Features:18-80VDC, 0-20A, 20-400W. Based on DSP control technology and high smooth servo control algorithm. Parameter visible tuning tools, including Pro Tuner and STU. Feedback resolution X4 encoder line count. Position Following error lock range adjustable Position error can be eliminated to 1 count, and Velocity error can be eliminated to the Desired Velocity* 0.3% Electronic gear ratio from 1/255 to 255 Built-in motion controller for self-test with trapezoidal velocity profile Support PUL/DIR and CW/CCW control signals Opto-isolated inputs, support single-ended and differential signals 10 latest errors self-record function Over-current, over-voltage, under-voltage, phase error, encoder error, position following error protectionsSmall size, surface-mount technology Specifications:Model: DCS810Control Mode: Step & DirMax Input Frequency: 500KHzInput Voltage Range: 18 - 80 VDCContinuous Current: 10 APeak Current: 20 ALogic Current Range: 7-15 mA (10mA typical)Logic Voltage Range: 4-5 VDC for pulse active high (default) , or 0-0.5V for pulse active lowCommunication Type: RS232Pulse enabled at: Rising edgeElectronic gear ratio: 1/255 - 255# of Digital Inputs: 3Step Width: 2,500 nsMinimal Direction Setup Time: 5,000 nsProtection: Over-current; over-voltage; under voltage; phase error; encoder error; position following errorIsolation Resistance: 500M OhmEnvironment: Avoid dust, oil fog and corrosive gasesAmbient Temporature: 0-50°CHumidity: 40–95% RHOperating Temporature: 0-70°CVibration: 5.9 m/s2 MaxStorage Temporature: -20-65°CSpecification: 4.57 X 2.73 X 1.04 InchesWeight: 0.46 lb Control Mode: Step & DirMax Input Frequency: 500KHzInput Voltage Range: 18 - 80 VDCContinuous Current: 10 APeak Current: 20 ALogic Current Range: 7-15 mA (10mA typical)Logic Voltage Range: 4-5 VDC for pulse active high (default) , or 0-0.5V for pulse active lowCommunication Type: RS232Pulse enabled at: Rising edgeElectronic gear ratio: 1/255 - 255# of Digital Inputs: 3Step Width: 2,500 nsMinimal Direction Setup Time: 5,000 nsProtection: Over-current; over-voltage; under voltage; phase error; encoder error; position following errorIsolation Resistance: 500M OhmEnvironment: Avoid dust, oil fog and corrosive gasesAmbient Temporature: 0-50°CHumidity: 40–95% RHOperating Temporature: 0-70°CVibration: 5.9 m/s2 MaxStorage Temporature: -20-65°CSpecification: 4.57 X 2.73 X 1.04 InchesWeight: 0.46 lb Electrical Specifications (Tj = 25oC/77oF):arametersDCS810Min.TypicalMax.UnitPeak output current0-20ASupply voltage+18-+80VDCLogic signal current71015mAPulse input frequency0-500KHzIsolation resistance500 MohmCurrent provided to encoder 50mA Connector:
Leadshine DCS810 Brushed Servo Drive with Max 80 VDC Input Voltage and 20A Peak Current

Leadshine DCS810 Brushed Servo Drive with Max 80 VDC Input Voltage and 20A Peak Current

Mechanical Specifications (unit: mm[inch] ):
Leadshine DCS810 Brushed Servo Drive with Max 80 VDC Input Voltage and 20A Peak Current

Typical Connection:
Leadshine DCS810 Brushed Servo Drive with Max 80 VDC Input Voltage and 20A Peak Current

Capable of driving 20-400W brushed servo motors:DCM50202D-1000DCM50205D-1000DCM50207D-1000DCM57202D-500DCM57207D-500
Leadshine DCS810 Brushed Servo Drive with Max 80 VDC Input Voltage and 20A Peak Current

Customer Reviews

Similar Products