Leadshine Hbs507 (Equal To:es-D508,updated From Hbs57) Easy Servo Drive Maximum 20-50 Vdc Input Voltage, And 8.0A Peak Current

Leadshine Hbs507 (Equal To:es-D508,updated From Hbs57) Easy Servo Drive Maximum 20-50 Vdc Input Voltage, And 8.0A Peak Current

Price Monitor

Price Type
Desired Price$
Your Email
Sign up for price drop alerts
We are the leading aliexpress shopping assistant help you buy factory direct goods at unbeatable price.
Product prices and availability are accurate as of time indicated and are subject to change.

Price History

Product Details

  • Brand NameLeadshine
  • Motor TypeDc Motor
  • Model NumberHbs57
  • Control ModeStep & Dir
  • Max Input Frequency200Khz
  • Input Voltage Range20 - 50 Vdc
  • Peak Current8 A
  • Software Cofig Resolution Range200 - 102,400 (Increased By 200)
  • Default Step Resolution4000
  • Communication TypeRs232
  • Pulse Enabled AtRising Edge
  • Isolation Resistance500M Ohm
  • Vibration5.9 M/s2 Max

Product Description

Notice:
We only supply genuine Leadshine servo motor drive with reasonable price, if your budget is limit, please contact our service man online and he she will recommend you the low price other supplier.

HBS507 ( equal to:ES-D508 updated from HBS57) Easy Servo Drive
Same as brushless servo systems, a HBS57 servo drive can take encoder feedback from driven easy servo motors and close the position loop to eliminate possibility of lose of movement synchronization. Therefore, stall and loss of steps commonly seen in open-loop stepper systems will never occur in HBS57 driven easy servo systems. Compared with constant output current in open loop stepper drive, output current from a HBS57 servo drive to the driven motor is load based. When torque requirement is low, the output current is automatically lowered to "just enough". But when the torque requirement is high, HBS57 can boost the output current up to 8.0A. This can significantly lower down motor heating by up to 50% over open-loop stepper systems. There is no torque reservation needed for an HBS57 driven easy servo system. You can always implement 100% of the driven stepper motor and thus improve system high speed performance by as much as 30% over open lop stepper systems. Smoothness, quietness (50% improvement), and acceleration (30% improvement) are also significantly improved in HBS57 easy servo systems. Compared with traditional brushless servo systems, cost of HBS57 easy servo systems is much lower. They outperforms traditional brushless servo systems with the feature of much higher low-middle speed torque, high stiffness, quicker response time, no position hunting, no tuning / easy setup, no overshooting, and zero settling time.Features:32-bit DSP based vector control algorithm to combine advantage of open-loop stepper brushless servo drivesStep/Direction or CW/CCW command inputDefault maximum 200K frequency; 500K optionalInput voltage: 20-50 VDCLoad-based automatically adjusted output current of 0-8.0A Default 4,000 (1/20) microstepping resolution; 200-104,000 (increase by 200) software configurableNo Stall and no loss of step. Closed loop between the drive and driven motor to eliminate loss of move synchronization in open loop stepper systems. Smooth motor movement; extra low motor heatingFast response, no delay and zero settling timeHigh torque at starting and low-middle speed; high stiffness at standstillNo tuning for easy configuration over traditional servo systemsNo overshooting; no hunting over traditional servo systemsMuch lower cost than traditional servo systems 32-bit DSP based vector control algorithm to combine advantage of open-loop stepper brushless servo drivesStep/Direction or CW/CCW command inputDefault maximum 200K frequency; 500K optionalInput voltage: 20-50 VDCLoad-based automatically adjusted output current of 0-8.0A Default 4,000 (1/20) microstepping resolution; 200-104,000 (increase by 200) software configurableNo Stall and no loss of step. Closed loop between the drive and driven motor to eliminate loss of move synchronization in open loop stepper systems. Smooth motor movement; extra low motor heatingFast response, no delay and zero settling timeHigh torque at starting and low-middle speed; high stiffness at standstillNo tuning for easy configuration over traditional servo systemsNo overshooting; no hunting over traditional servo systemsMuch lower cost than traditional servo systems 32-bit DSP based vector control algorithm to combine advantage of open-loop stepper brushless servo drivesStep/Direction or CW/CCW command inputDefault maximum 200K frequency; 500K optionalInput voltage: 20-50 VDCLoad-based automatically adjusted output current of 0-8.0A Default 4,000 (1/20) microstepping resolution; 200-104,000 (increase by 200) software configurableNo Stall and no loss of step. Closed loop between the drive and driven motor to eliminate loss of move synchronization in open loop stepper systems. Smooth motor movement; extra low motor heatingFast response, no delay and zero settling timeHigh torque at starting and low-middle speed; high stiffness at standstillNo tuning for easy configuration over traditional servo systemsNo overshooting; no hunting over traditional servo systemsMuch lower cost than traditional servo systems SpecificationsModel: HBS57Phase: 3Control Mode: Step & DirectionMax Input Frequency: 200KHzEncoder Feedback: Yes. Fully close the loop between the drive and drive motorInput Voltage Range: 20 - 50 VDCPeak Current: 8.00 ASoftware Cofig Resolution Range: 200 - 102,400 (increased by 200)Default Step Resolution: 4000Default Holding Current Percentage: 40 %Communication Type: RS232Pulse enabled at: Rising edgeIsolation Resistance: 500M OhmEnvironment: Avoid dust, oil fog and corrosive gasesAmbient Temporature: 0-50°CHumidity: 40–95% RHOperating Temporature: 0-70°CVibration: 5.9 m/s2 MaxStorage Temporature: -20-65°CSpecification: 4.57 X 2.72 X 1.04 InchesWeight: 0.62 lb Model: HBS57Phase: 3Control Mode: Step & DirectionMax Input Frequency: 200KHzEncoder Feedback: Yes. Fully close the loop between the drive and drive motorInput Voltage Range: 20 - 50 VDCPeak Current: 8.00 ASoftware Cofig Resolution Range: 200 - 102,400 (increased by 200)Default Step Resolution: 4000Default Holding Current Percentage: 40 %Communication Type: RS232Pulse enabled at: Rising edgeIsolation Resistance: 500M OhmEnvironment: Avoid dust, oil fog and corrosive gasesAmbient Temporature: 0-50°CHumidity: 40–95% RHOperating Temporature: 0-70°CVibration: 5.9 m/s2 MaxStorage Temporature: -20-65°CSpecification: 4.57 X 2.72 X 1.04 InchesWeight: 0.62 lbModel: HBS57Phase: 3Control Mode: Step & DirectionMax Input Frequency: 200KHzEncoder Feedback: Yes. Fully close the loop between the drive and drive motorInput Voltage Range: 20 - 50 VDCPeak Current: 8.00 ASoftware Cofig Resolution Range: 200 - 102,400 (increased by 200)Default Step Resolution: 4000Default Holding Current Percentage: 40 %Communication Type: RS232Pulse enabled at: Rising edgeIsolation Resistance: 500M OhmEnvironment: Avoid dust, oil fog and corrosive gasesAmbient Temporature: 0-50°CHumidity: 40–95% RHOperating Temporature: 0-70°CVibration: 5.9 m/s2 MaxStorage Temporature: -20-65°CSpecification: 4.57 X 2.72 X 1.04 InchesWeight: 0.62 lb Electrical Specifications (Tj = 25oC/77oF):
Leadshine HBS507 (equal to:ES-D508,updated from HBS57) Easy Servo Drive Maximum 20-50 VDC Input Voltage, and 8.0A Peak Current

Mechanical Specifications (unit: mm[inch] ):
Leadshine HBS507 (equal to:ES-D508,updated from HBS57) Easy Servo Drive Maximum 20-50 VDC Input Voltage, and 8.0A Peak Current

Typical Connection
Leadshine HBS507 (equal to:ES-D508,updated from HBS57) Easy Servo Drive Maximum 20-50 VDC Input Voltage, and 8.0A Peak Current

Capable of driving motors:
Leadshine HBS507 (equal to:ES-D508,updated from HBS57) Easy Servo Drive Maximum 20-50 VDC Input Voltage, and 8.0A Peak Current

Real Photo

Customer Reviews

Similar Products