MPPT Function 600W on Grid Tie Inverter 30V 36V Panel 60 72 Cells MPPT pure sine wave inverter 220V Output
1. 1pcs Micro inverter
2. 1pcs user manual
3. 1pcs AC Cord
Smart Grid Tie inverter is a compact unit,which directly converts direct current into alternating current for powering appliances and/or office equipments and connecting to utility grid.The AC output from Smart Micro inverter is synchronized and in-phase with the utility grid.It is a key device of power generation systems such as PV power generation system.
Smart Micro inverter specially optimized design to work with modularization of DC power supplies which includes the mainstream solar modules,18V(36cells),24V(60 cells) and 36V (72cells)Moncrystal and/or polycrystalline solar panels and batteries.Smart Micro inverters are stabliation,reliable and high conversion efficiency items.It is the best choice for PV power generation system.
Smart Micro inverter can be easily placed and attached to the rack underneath of PV module.No need sapces for independent installation and low voltage DC wre connects from the PV module to smart Micro inverter can eliminate the risk of high DC voltage.Distributed modularization design philosophy for smart micro inverter insures the productiveness of the whole system and will not affect by a single point of failure.Each Smart Micro inverter is individually connected to each PV module in the array.This unique configuation means that an individual Maximum Peak Power Point Tracker(MPPT) controls each PV modules in the array which may be affected by shading,soiling,orientation or mismatch,etc.
Smart Micro inverter insures top performance for maximizing energy production from the whole PV system and gets return on investment in less time.
Wide voltage input(22-60VDC)
Achieve wide voltage input.
DC voltage input 22-60VDC
Second level power variable voltage conversion
Kinds of frequency output function.
It can apply to 50Hz and 60Hz frequency of AC.
Frequency range: 45Hz ~ 63Hz
AC 0 angle with high precision auto-detection
AC phase angle of 0 through isolation amplifier then input to the MCU for high-precision detection and analysis. The phase shift rate is less than 1%, thus achieve high-precision with phase modulation AC output together.
Synchronous High-frequency Modulation
1 Modulation synthesis: half wave and full-bridge modulation synthesis (100Hz / 120Hz)
2 Synthetic way: MOSFET full-bridge
3 High frequency: 38KHz
Pure Sine Wave Output
Use SPWM directly to make pure sine wave output.
1 Output waveform: Adopt complementary PWM to push-pull pure sine wave.
2 Generate means: enhancement-mode SPWM
Power Automatically Locked (APL)
In different current fluctuations, we should use the MPPT function. When the MPPT function adjusted to the
maximum power point, the product automatically powers locked in maximum power point, then made the
output power more stable.
Power lock: The biggest sampling point of MPPT.
Automatically Adapt To Different Load Power
The output synchronise with the electrical utility Grid. With a strong back of power grid, any power load can work, such as: Inductive Load; Resistance Load; Condensive Load
Constant Current, Constant Power, Current-limit Protection
The output synchronise with the Power Grid and power phase, and tie to the Power Grid; take the Power Grid as a supplement,make the output current and power are constant,not affect by load, without any overload, over-current phenomenon.
Automatically Shut Down When The Power Output Of a Fault
When the city power system is in failure, the inverter will automatically turn off the output.
Stack Multiple Machines
Multiple small power inverters in parallel can achieve large output power.
High-Frequency High Conversion Rate
Adapt high frequency converter, the output more efficient.
Maximum Power Point Tracking (MPPT) Use battery as power supply, this function is not exist.
Current intensity, voltage constantly changes, if there is no power point tracking, then there will be a lot of problems in the past usually adopted a solar controller, this product uses high_precision MPPT
computing power, automatic and immediate to solar panels output power adjustment in the maximum output point, in order to achieve a stable output purposes.
Recommend use solar panels
DC MAX input current
AC MAX output power
DC maximum voltage
DC input voltage range
MAX output power factor
DC input Reverse voltage protection
AC output voltage range
120VAC(90-140VAC) or 230VAC(190-260VAC)
AC frequency range
50Hz/ 60Hz Automatic detection and adjust
Output current total