We are the leading aliexpress shopping assistant help you buy factory direct goods at unbeatable price.
Product prices and availability are accurate as of time indicated and are subject to change.
Record Audio FormatWav
Record Audio FormatMp3
Voice Activated RecordingNo
Function 1Recording Pen
Function 3Noise Reduction Recorder
Function 5Smart Bracelet
Before you use this product, please be sure to read all the information that comes with it ●Attentions 1. Do not allow children to play the machine alone, do not fall with the hard objects friction impact, otherwise it may lead to machine data loss or other hardware damage. 2. Do not use chemical reagents or cleaning reagents to clean the machine, this will damage the machine surface corrosion. 3. It is recommended that you do not use this unit while driving a motor vehicle or cycling. Please ensure safety. 4. Please promptly back up the documents and data stored in the machine, the company does not guarantee internal information, if there is data loss, the company is not responsible. 5. Do not use this product overloaded power, forced bending or heavy material extrusion line, so as not to cause heat caused by fire. 6. Do not use the wet hand to pull the power to prevent electric shock. 7. Changes may occur due to the performance and functionality of this product. Please do not hesitate to let you know. 8. If the actual setting and use of this product is inconsistent with this manual due to the firmware upgrade, please contact your local dealer. Thank you for your cooperation! Tips: If the machine donnot use for a long time, please charge every 3 months, and then discharge, to prevent the battery failure. ●Product Description
Function definition: (short press for 1 second, long press for 3 seconds) reset button ② time control button ③ indicator light ④ "VOL-" : short press next song when playing ⑤ USB interface / headphone jack ⑥ "VOL+" : on/ off / recording, short press last song when playing Indicator Description: 1. Recording: red light flashes 5 times, automatically shut down2. Play: Blue light flashes3. Standby state: blue light long light 4. Charging: When charging, the red light is long (full of blue light long)5. Low power: purple light flash6. Power on / off: purple light about 2 seconds or so, automatically extinguished. ●Indicating light Explain 1. recording: red light flashing 5 times, automatic shutdown 2. play: blue light flashing 3. standby status: blue light is long time bright 4. charging: when charging, the red light is long time bright (full of electricity, blue light is ling time bright) 5. low power: purple light flash 6. power on and off: purple light is bright for about 2 seconds and automatically shutdown ●Boot 1. When the headset is not insert, long press ⑥, the machine start recording, the light from the purple light to red light, red light flashes 5 times, and goes off. 2. Insert the headset, long press ⑥, the machine starting up, and play the file, the light from the purple light to red light, and then turn to blue light flashing. ●Shutdown 1. In the standby mode (blue light long time bright), long press ⑥, purple light bright about 2 seconds, and then automatically off, the machine shut down. 2. In the standby mode (blue light long time bright), waiting for 3 minutes without operation will automatically shut down. (Note: insert the headset is unable to shut down, you must unplug the headset before turning off) ●Recording 1. When the headset is not insert, long press ⑥, the machine starts recording (the light turns from purple to red, the red light flashes 5 times and goes off). 2. In the standby mode (blue light long time bright), long press ④, the machine starts recording (the red light flashes 5 times and goes off). Note: 1. Insert the headset is unable to record, can only play, you must unplug the headset, and then operate to record. 2. In order to avoid recording the sound of clockwise moving, suggest to pull out the ② to stop the time moving around when recording ●Save 1. In the recording state, insert the headset to save the recording and play. 2. In the recording state, long press ⑥ to save the recording, and standby, blue light long time bright. 3. When the recording file reaches 2GB file, it is automatically saved as aindividual file. 4. In the recording state, insert the computer USB can only charge the machine, the computer can not read the data. ● Playback 1. In the recording state, insert the headset, the machine automatically saves and plays the recording file. 2. In the standby state insert the headset, short press ⑥ to play last song, short press ④ to play next song. 3. In the ⑤ to insert the USB cable and connect to the computer, use the computer to play ● Synchronize system time 1. In the standby mode, connect with the computer with USB cable. After several seconds, the computer will recognize and display the "removable disk" logo. 2. Double-click to open the "removable disk" select "Settime" folder double-click to open. 3. Select "SetDigitRecorderTm.exe" in the file. Double-click to open
4. At this time there is a small window, click "SetTime" system automatically pops up the computer synchronization time, click "OK" to confirm. 5. When the time of the recording pen is set, remove the removable disk in the correct way. Note: 1. If the machine is idle for a long time without charging, the system time will be restored, please re-connect the computer to synchronization system time! (This set the time can be used as recording reference time) 2.USB line must first insert to the recorder first and then plug to the computer, or it may not be connected to the computer, or cause the computer to crash or restart. ● Connect the computer 1. In the standby mode, connect with the computer with USB cable. After several seconds, the computer will recognize and display the "removable disk" logo. 2. After connecting, the red light is on and the data can be transferred. Attention: A. Please remove the removable disk in the normal way to prevent data loss. B. If the computer does not recognize it, or if the removable disk ID is not displayed after a few seconds, reset and re-insert it once. Note: USB line must first insert to the recorder first and then plug to the computer, or it may not be connected to the computer, or cause the computer to crash or restart. ● Charging 1) Plug one end of the USB cable into the USB port of the unit and plug the other end into the USB port of the computer or charger adapter. The charging time is about 2 hours. The indicator light is red when charging, and when full power, the light will be blue 2) When the machine plugs in the charger in the recording state, the machine can both charge and record at the same time. ●Technical specifications Order Size 2 * X42 * 14MM USB Interface USB 2.0 High Speed Built-in Memory 4GB - 32GB 4GB storage for about 37 hours 8GB storage for about 73 hours 16GB stored for about 146 hours 32GB stored for about 292 hours Battery Capacity 3.7V / 250mAh Recording AV 256Kbps Use Temperature -5 to 40 degrees Recording Sampling Rate 48KHZ Recording Type One key record and one key save Support System Win98 / Xp / Vista / Win7 / Win10 Headphones Output external stereo Music Format MP3 / WMA / WAV Body Weight 55g