Water Transfer Printing Film Cool Scrawl Design Pattern NO.HD914 Width 0.5M Length 20M Hydrographic Film Transfer Hydro DippingUSD 35.99/lot
New Arrival Hydro Dipping Water Transfer Printing Film Skull Pattern NO.HGA-7248 Width 0.5m Length 20m Hydrographic Film SkullUSD 31.99/lot
New Arrival Hydro Dipping Water Transfer Printing Film Cartoon Design NO.HGA-7598 Width 0.5m Length 60m Hydrographic Film USD 95.99/lot
New Arrival Hydro Dipping Water Transfer Printing Film Feature Design NO.HGA-7648 Width 0.5m Length 60m Hydrographic FilmUSD 95.99/lot
New Arrival Hydro Dipping Water Transfer Printing Film Skull Design NO.HGA-7638 Width 0.5m Length 60m Hydrographic Film SkullUSD 95.99/lot
Free Shipping Hydrographic Film Transfer Sexy Ladies Pattern NO.HGA-7218 Width 0.5m Hydrographics Water Transfer Printing FilmUSD 28.80/lot
New Arrival Hydro Dipping Water Transfer Printing Film Honeycomb Pattern NO.HGA-7118 Width 0.5m Length 60m Hydrographic FilmUSD 95.99/lot
FIELDS OF APPLICATION
Please read the following contents elaboratively.
STEP 1: PREPARING WORK 1.The Water Transfer printing includes Hydrographic Film and Activator. 2.Keep film in a cool and dry location 3.Choose your Dipping container 4.Identify the side of the film that would be placed facing the water.To do that, wet your fingers index and thumb and grab the film. Hold it for 5 seconds, then release it. The side that sticks to one of your finger will be the one that needs to be placed touching the water. STEP 2:PLACING THE FILM ON THE WATER
(Water Temperature: 30ºC to 34ºC)
1.Place the Film on the water starting from one of the corners. This will avoid any air bubbles between the film and the water.
2. If any air bubble has been detected, blow gently and try to put it outside the film.
3.Film needs to be approximately between 1min 15sec and 1min 30sec on the water before activation. (depends on the type of film)
STEP 3:SPRAYING THE ACTIVATOR
1.Spray the Activator evernly through the surface of the film.
2.Wait for 5 seconds. If done correctly, the film will turn into liquid (glass effect). That will indicate that the piece can be immersed.
Dip the piece slowly in 45° angle to avoid air bubbles. All pieces have different ways of immersion. It is all about technique. So, practice is the best way to achive confidence introducing the piece. STEP 5:WASHING AND RINSING Once the piece has been immersed and decorated, it is necessary to wash it in order to eliminate any residuals from the dipping process. STEP 6:CLEAR COATING
Clear coating the pece is one of the most important steps. This will protect the decorated piece. Clear coat will give the piece a unique,durable and professional finish. We also have the following products that you can choose, if you need customized, just mail your unique and ideal pattern to us, thanks!