New Epsolar MPPT 10A Tracer Solar Charge Controller 12V 24V LCD Diaplay EPEVER Solar Panel Battery Charge Regulator Tracer1210A
1Pcs Solar controller
1Pcs User Manual
Rated Charge Current (IBat)
Rated Charge Power
MAX. PV Power (PMax)
Appreciate you for choosing MPPT solar charge controller, Tracer-A series. Based on common positive design and advanced MPPT control algorithm, with LCD displaying running status, this product is artistic, economical and practical.
With MPPT control algorithm, in any situation, products of this series can fast and accurately track out the best maximum power point (MPP) of photovoltaic array, in order to obtain the maximum solar energy in time, which remarkably improves energy efficiency. There is dual display function: local LCD panel and remote meter. With Modbus communication protocol interface, it is convenient for customers to expand applications and monitor in various fields like telecommunication base station, household system, street lighting system, wilderness monitoring system, etc.
All-round electronic fault self-test function and enhanced electronic protection function could furthest avoid damages on system components resulting from installation errors or system failures.
Advanced Maximum Power Point Tracking (MPPT) technology, with efficiency no less than 99.5%.
High quality components, perfecting system performance, with maximum conversion efficiency of 98%.
Ultra-fast tracking speed and guaranteed tracking efficiency.
Accurately recognizing and tracking of multiple power points.
Reliable automatic limit function of maximum PV input power, ensuring no overload under any circumstance.
Wide MPP operating voltage range.
12/24VDC automatically identifying system voltage.
LCD panel display design, dynamically displaying tool’s operating data and working condition.
Multiple load control modes: manual control, light ON/OFF, light On+Timer and test mode.
Support 3 charging preprogram options: Sealed, Gel, Flooded.
Battery temperature compensation function.
Real-time energy statistics function.
With RS-485 communication bus interface and Modbus communication protocol, it is available to meet various communication requirements in different situations.
Available for EPsolar network module (eBox--01)with protocol TCP/UDP/SNMP, to realize connection to internet.
Available for PC monitoring and external display unit connecting like MT50 and so on, realizing real-time data checking and parameters setting.
Support software upgrade.
Mounting hole sizeΦ5
PV Over Current
The controller will limit battery charging current to the Maximum Battery Current rating. Therefore an over-sized solar array will not operate at peak power.
PV Short Circuit
When PV short circuit occurs, the controller will stop charging. Clear it to resume normal operation.
PV Reverse Polarity
Fully protection against PV reverse polarity, no damage to the controller will result. Correct the miswire to resume normal operation.
Battery Reverse Polarity
Fully protection against battery reverse polarity, no damage to the controller will result. Correct the miswire to resume normal operation.
Battery Over voltage
When battery voltage reach to the voltage set point of Over Voltage Disconnect, the controller will stop charging the battery to protect the battery overcharge to break down.
Battery Over discharge
When battery voltage reach to the voltage set point of Low Voltage Disconnect , the controller will stop discharging the battery to protect the battery over discharged to break down.
The controller detect the battery temperature through the external temperature sensor. If the battery temperature exceeds 65ºC, the controller will automatically start the overheating protection to stop working and recover below 50 ºC.
If the load current exceeds the maximum load current rating 1.05 times, the controller will disconnect the load. Overloading must be cleared up through reducing the load and restarting controller.
Ÿ Load Short Circuit
Fully protected against load wiring short-circuit. Once the load shorts (more than quadruple rate current), the load short protection will start automatically. After five automatic load reconnect attempts, the fault must be cleared by restarting controller.
Damaged Remote Temperature Sensor
If the temperature sensor is short-circuited or damaged, the controller will be charging or discharging at the default temperature 25°C to prevent the battery damaged from overcharging or over discharged.
If the temperature of the controller heat sinks exceeds 85°C, the controller will automatically start the overheating protection and recover below 75°C.
High Voltage Transients
PV is protected against small high voltage surge. In lightning prone areas, additional external suppression is recommended.