Newest Diy Mini 3K Pure Carbon Mini 210Mm 210 Cross Racing Quadcopter W/ 4Mm Main Lower Plate For Geprc Gep-Tx Qav-X

Newest Diy Mini 3K Pure Carbon Mini 210Mm 210 Cross Racing Quadcopter W/ 4Mm Main Lower Plate For Geprc Gep-Tx Qav-X
  • SellerReady to sky
  • List Price$18.99Pack
  • Avg. Price$18.96Pack
  • Your Price$17.85Pack
  • ShipmentFree Shipping
  • You Save$1.14Pack-6.00%
  • Ratings4.7 / 5.0 (82)
  • Updated14 hours ago
  • Colorwith Matek PDBwithout Matek PDB
  • View OfferBuy from AliExpress

Price Monitor

Price Type
Desired Price$
Your Email
Sign up for price drop alerts
We are the leading aliexpress shopping assistant help you buy factory direct goods at unbeatable price.
Product prices and availability are accurate as of time indicated and are subject to change.

Price History

Product Details

  • UseVehicles & Remote Control Toys
  • Rc Parts & AccsCanopies
  • Upgrade Parts/accessoriesWheel Hub
  • Tool SuppliesCutting
  • For Vehicle TypeAirplanes
  • Four-Wheel Drive AttributesSlot
  • Remote Control Peripherals/devicesServos
  • MaterialPolyester

Product Description

DIY FPV mini 210 210mm drone quadcopter 3K pure carbon fiber frame 4mm main lower plate batter than QAV-X for GEPRC GEP-TX Description: Wheelbase: 210mm 5 Inch props Arm : 4mm Other Board :1.5mm Recommanded Part(not included): Flight Controller: F3 /Naze32/ CC3D Motor: 2204/2205/2206 ESC: 20A-30A Propeller: 5 inch Battery: 3S 1300mAh ~ 4S 1300mAh Matek PDB-XT60 distribution board: The PDB-XT60 has been engineered to provide the highest possible performance and reliability in a 36*50mm & 4 layers PCB. It distributes power from a LiPo pack to 6 ESCs, as well as providing synchronised & regulated DC 5V outputs & linear regulated DC 12V for powering Cameras, Servos, RC receiver, Flight Controllers, Video Transmitters, LEDs, etc. It offers a XT60 socket to connect the LiPo pack conveniently. Description: General: -Input voltage range (3S-4S LiPo operation): 9 - 18V DC -Regulated 5V and 12V outputs -LED power indicators ( 5V & 12V outputs ) -6 ESC outputs & 1 pair VCC/GND pads ESC outputs: -Continuous current: 25A*4 or 15A*6 -Peak current (10 seconds/minute): 30A*4 or 20A*6 BEC 5V output: -Designed for RC Receivers, Flight controllers, OSD, and Servos. -DC/DC synchronous buck regulator. -Voltage: 5.0 +/- 0.1VDC -Continuous current: 2 Amps (Max.2.5A 10s/minute) -Output Ripple: 40mV (VIn=16V, VOut=5V@2A load) -Short-circuit tolerant (5 seconds/minute) BEC 12V output: -Designed for Video TX or FPV camera with linear regulator. -The battery should be 4S LiPo (13~18V DC) - Voltage: 12.0 +/- 0.3VDC -Continuous current: 500mA (Max.0.8A 5s/minute) -Short-circuit tolerant (2 seconds/minute) BEC 12V @ 3S LiPo -Output voltage= 3S LiPo voltage -1V Physical: -Dimensions: 36 x 50 x 4 mm (without XT60) -Mounting: 30.5 x 30.5mm, Φ3mm - Weight: 7.5g(w/o XT60), 11g(w/ XT60) Features: 2oz copper, 4-layers &1.6mm PCB. Built-in XT60 Socket Total 6 pairs ESC solder tabs are fit for H or X type frame 5V & 12V Output LED indicators & Short circuit tolerant Package list: 1 x 210mm Cross Racing Quadcopter (unassembled) 1 x battery belt 1 x Matek board
Newest DIY Mini 3K pure carbon Mini 210mm 210 Cross Racing Quadcopter w/ 4mm Main Lower Plate for GEPRC GEP-TX QAV-X

Newest DIY Mini 3K pure carbon Mini 210mm 210 Cross Racing Quadcopter w/ 4mm Main Lower Plate for GEPRC GEP-TX QAV-X

Newest DIY Mini 3K pure carbon Mini 210mm 210 Cross Racing Quadcopter w/ 4mm Main Lower Plate for GEPRC GEP-TX QAV-X

Newest DIY Mini 3K pure carbon Mini 210mm 210 Cross Racing Quadcopter w/ 4mm Main Lower Plate for GEPRC GEP-TX QAV-X

Newest DIY Mini 3K pure carbon Mini 210mm 210 Cross Racing Quadcopter w/ 4mm Main Lower Plate for GEPRC GEP-TX QAV-X

Newest DIY Mini 3K pure carbon Mini 210mm 210 Cross Racing Quadcopter w/ 4mm Main Lower Plate for GEPRC GEP-TX QAV-X

Newest DIY Mini 3K pure carbon Mini 210mm 210 Cross Racing Quadcopter w/ 4mm Main Lower Plate for GEPRC GEP-TX QAV-X

Newest DIY Mini 3K pure carbon Mini 210mm 210 Cross Racing Quadcopter w/ 4mm Main Lower Plate for GEPRC GEP-TX QAV-X

DIY FPV mini 210 210mm drone quadcopter 3K pure carbon fiber frame 4mm main lower plate batter than QAV-X for GEPRC GEP-TX Description: Wheelbase: 210mm 5 Inch props Arm : 4mm Other Board :1.5mm Recommanded Part(not included): Flight Controller: F3 /Naze32/ CC3D Motor: 2204/2205/2206 ESC: 20A-30A Propeller: 5 inch Battery: 3S 1300mAh ~ 4S 1300mAh Matek PDB-XT60 distribution board: The PDB-XT60 has been engineered to provide the highest possible performance and reliability in a 36*50mm & 4 layers PCB. It distributes power from a LiPo pack to 6 ESCs, as well as providing synchronised & regulated DC 5V outputs & linear regulated DC 12V for powering Cameras, Servos, RC receiver, Flight Controllers, Video Transmitters, LEDs, etc. It offers a XT60 socket to connect the LiPo pack conveniently. Description: General: -Input voltage range (3S-4S LiPo operation): 9 - 18V DC -Regulated 5V and 12V outputs -LED power indicators ( 5V & 12V outputs ) -6 ESC outputs & 1 pair VCC/GND pads ESC outputs: -Continuous current: 25A*4 or 15A*6 -Peak current (10 seconds/minute): 30A*4 or 20A*6 BEC 5V output: -Designed for RC Receivers, Flight controllers, OSD, and Servos. -DC/DC synchronous buck regulator. -Voltage: 5.0 +/- 0.1VDC -Continuous current: 2 Amps (Max.2.5A 10s/minute) -Output Ripple: 40mV (VIn=16V, VOut=5V@2A load) -Short-circuit tolerant (5 seconds/minute) BEC 12V output: -Designed for Video TX or FPV camera with linear regulator. -The battery should be 4S LiPo (13~18V DC) - Voltage: 12.0 +/- 0.3VDC -Continuous current: 500mA (Max.0.8A 5s/minute) -Short-circuit tolerant (2 seconds/minute) BEC 12V @ 3S LiPo -Output voltage= 3S LiPo voltage -1V Physical: -Dimensions: 36 x 50 x 4 mm (without XT60) -Mounting: 30.5 x 30.5mm, Φ3mm - Weight: 7.5g(w/o XT60), 11g(w/ XT60) Features: 2oz copper, 4-layers &1.6mm PCB. Built-in XT60 Socket Total 6 pairs ESC solder tabs are fit for H or X type frame 5V & 12V Output LED indicators & Short circuit tolerant Package list: 1 x 210mm Cross Racing Quadcopter (unassembled) 1 x battery belt 1 x Matek board
Newest DIY Mini 3K pure carbon Mini 210mm 210 Cross Racing Quadcopter w/ 4mm Main Lower Plate for GEPRC GEP-TX QAV-X

Newest DIY Mini 3K pure carbon Mini 210mm 210 Cross Racing Quadcopter w/ 4mm Main Lower Plate for GEPRC GEP-TX QAV-X

Newest DIY Mini 3K pure carbon Mini 210mm 210 Cross Racing Quadcopter w/ 4mm Main Lower Plate for GEPRC GEP-TX QAV-X

Newest DIY Mini 3K pure carbon Mini 210mm 210 Cross Racing Quadcopter w/ 4mm Main Lower Plate for GEPRC GEP-TX QAV-X

Newest DIY Mini 3K pure carbon Mini 210mm 210 Cross Racing Quadcopter w/ 4mm Main Lower Plate for GEPRC GEP-TX QAV-X

Newest DIY Mini 3K pure carbon Mini 210mm 210 Cross Racing Quadcopter w/ 4mm Main Lower Plate for GEPRC GEP-TX QAV-X

Newest DIY Mini 3K pure carbon Mini 210mm 210 Cross Racing Quadcopter w/ 4mm Main Lower Plate for GEPRC GEP-TX QAV-X

Newest DIY Mini 3K pure carbon Mini 210mm 210 Cross Racing Quadcopter w/ 4mm Main Lower Plate for GEPRC GEP-TX QAV-X

DIY FPV mini 210 210mm drone quadcopter 3K pure carbon fiber frame 4mm main lower plate batter than QAV-X for GEPRC GEP-TX Description: Wheelbase: 210mm 5 Inch props Arm : 4mm Other Board :1.5mm Recommanded Part(not included): Flight Controller: F3 /Naze32/ CC3D Motor: 2204/2205/2206 ESC: 20A-30A Propeller: 5 inch Battery: 3S 1300mAh ~ 4S 1300mAh Matek PDB-XT60 distribution board: The PDB-XT60 has been engineered to provide the highest possible performance and reliability in a 36*50mm & 4 layers PCB. It distributes power from a LiPo pack to 6 ESCs, as well as providing synchronised & regulated DC 5V outputs & linear regulated DC 12V for powering Cameras, Servos, RC receiver, Flight Controllers, Video Transmitters, LEDs, etc. It offers a XT60 socket to connect the LiPo pack conveniently. Description: General: -Input voltage range (3S-4S LiPo operation): 9 - 18V DC -Regulated 5V and 12V outputs -LED power indicators ( 5V & 12V outputs ) -6 ESC outputs & 1 pair VCC/GND pads ESC outputs: -Continuous current: 25A*4 or 15A*6 -Peak current (10 seconds/minute): 30A*4 or 20A*6 BEC 5V output: -Designed for RC Receivers, Flight controllers, OSD, and Servos. -DC/DC synchronous buck regulator. -Voltage: 5.0 +/- 0.1VDC -Continuous current: 2 Amps (Max.2.5A 10s/minute) -Output Ripple: 40mV (VIn=16V, VOut=5V@2A load) -Short-circuit tolerant (5 seconds/minute) BEC 12V output: -Designed for Video TX or FPV camera with linear regulator. -The battery should be 4S LiPo (13~18V DC) - Voltage: 12.0 +/- 0.3VDC -Continuous current: 500mA (Max.0.8A 5s/minute) -Short-circuit tolerant (2 seconds/minute) BEC 12V @ 3S LiPo -Output voltage= 3S LiPo voltage -1V Physical: -Dimensions: 36 x 50 x 4 mm (without XT60) -Mounting: 30.5 x 30.5mm, Φ3mm - Weight: 7.5g(w/o XT60), 11g(w/ XT60) Features: 2oz copper, 4-layers &1.6mm PCB. Built-in XT60 Socket Total 6 pairs ESC solder tabs are fit for H or X type frame 5V & 12V Output LED indicators & Short circuit tolerant Package list: 1 x 210mm Cross Racing Quadcopter (unassembled) 1 x battery belt 1 x Matek board DIY FPV mini 210 210mm drone quadcopter 3K pure carbon fiber frame 4mm main lower plate batter than QAV-X for GEPRC GEP-TX Description: Wheelbase: 210mm 5 Inch props Arm : 4mm Other Board :1.5mm Recommanded Part(not included): Flight Controller: F3 /Naze32/ CC3D Motor: 2204/2205/2206 ESC: 20A-30A Propeller: 5 inch Battery: 3S 1300mAh ~ 4S 1300mAh Matek PDB-XT60 distribution board: The PDB-XT60 has been engineered to provide the highest possible performance and reliability in a 36*50mm & 4 layers PCB. It distributes power from a LiPo pack to 6 ESCs, as well as providing synchronised & regulated DC 5V outputs & linear regulated DC 12V for powering Cameras, Servos, RC receiver, Flight Controllers, Video Transmitters, LEDs, etc. It offers a XT60 socket to connect the LiPo pack conveniently. Description: General: -Input voltage range (3S-4S LiPo operation): 9 - 18V DC -Regulated 5V and 12V outputs -LED power indicators ( 5V & 12V outputs ) -6 ESC outputs & 1 pair VCC/GND pads ESC outputs: -Continuous current: 25A*4 or 15A*6 -Peak current (10 seconds/minute): 30A*4 or 20A*6 BEC 5V output: -Designed for RC Receivers, Flight controllers, OSD, and Servos. -DC/DC synchronous buck regulator. -Voltage: 5.0 +/- 0.1VDC -Continuous current: 2 Amps (Max.2.5A 10s/minute) -Output Ripple: 40mV (VIn=16V, VOut=5V@2A load) -Short-circuit tolerant (5 seconds/minute) BEC 12V output: -Designed for Video TX or FPV camera with linear regulator. -The battery should be 4S LiPo (13~18V DC) - Voltage: 12.0 +/- 0.3VDC -Continuous current: 500mA (Max.0.8A 5s/minute) -Short-circuit tolerant (2 seconds/minute) BEC 12V @ 3S LiPo -Output voltage= 3S LiPo voltage -1V Physical: -Dimensions: 36 x 50 x 4 mm (without XT60) -Mounting: 30.5 x 30.5mm, Φ3mm - Weight: 7.5g(w/o XT60), 11g(w/ XT60) Features: 2oz copper, 4-layers &1.6mm PCB. Built-in XT60 Socket Total 6 pairs ESC solder tabs are fit for H or X type frame 5V & 12V Output LED indicators & Short circuit tolerant Package list: 1 x 210mm Cross Racing Quadcopter (unassembled) 1 x battery belt 1 x Matek board
Newest DIY Mini 3K pure carbon Mini 210mm 210 Cross Racing Quadcopter w/ 4mm Main Lower Plate for GEPRC GEP-TX QAV-X

Newest DIY Mini 3K pure carbon Mini 210mm 210 Cross Racing Quadcopter w/ 4mm Main Lower Plate for GEPRC GEP-TX QAV-X

Newest DIY Mini 3K pure carbon Mini 210mm 210 Cross Racing Quadcopter w/ 4mm Main Lower Plate for GEPRC GEP-TX QAV-X

Newest DIY Mini 3K pure carbon Mini 210mm 210 Cross Racing Quadcopter w/ 4mm Main Lower Plate for GEPRC GEP-TX QAV-X

Newest DIY Mini 3K pure carbon Mini 210mm 210 Cross Racing Quadcopter w/ 4mm Main Lower Plate for GEPRC GEP-TX QAV-X

Newest DIY Mini 3K pure carbon Mini 210mm 210 Cross Racing Quadcopter w/ 4mm Main Lower Plate for GEPRC GEP-TX QAV-X

Newest DIY Mini 3K pure carbon Mini 210mm 210 Cross Racing Quadcopter w/ 4mm Main Lower Plate for GEPRC GEP-TX QAV-X

Newest DIY Mini 3K pure carbon Mini 210mm 210 Cross Racing Quadcopter w/ 4mm Main Lower Plate for GEPRC GEP-TX QAV-X

Newest DIY Mini 3K pure carbon Mini 210mm 210 Cross Racing Quadcopter w/ 4mm Main Lower Plate for GEPRC GEP-TX QAV-X

Newest DIY Mini 3K pure carbon Mini 210mm 210 Cross Racing Quadcopter w/ 4mm Main Lower Plate for GEPRC GEP-TX QAV-X

Newest DIY Mini 3K pure carbon Mini 210mm 210 Cross Racing Quadcopter w/ 4mm Main Lower Plate for GEPRC GEP-TX QAV-X

Newest DIY Mini 3K pure carbon Mini 210mm 210 Cross Racing Quadcopter w/ 4mm Main Lower Plate for GEPRC GEP-TX QAV-X

Newest DIY Mini 3K pure carbon Mini 210mm 210 Cross Racing Quadcopter w/ 4mm Main Lower Plate for GEPRC GEP-TX QAV-X

Newest DIY Mini 3K pure carbon Mini 210mm 210 Cross Racing Quadcopter w/ 4mm Main Lower Plate for GEPRC GEP-TX QAV-X

Newest DIY Mini 3K pure carbon Mini 210mm 210 Cross Racing Quadcopter w/ 4mm Main Lower Plate for GEPRC GEP-TX QAV-X

Newest DIY Mini 3K pure carbon Mini 210mm 210 Cross Racing Quadcopter w/ 4mm Main Lower Plate for GEPRC GEP-TX QAV-X

Newest DIY Mini 3K pure carbon Mini 210mm 210 Cross Racing Quadcopter w/ 4mm Main Lower Plate for GEPRC GEP-TX QAV-X

Newest DIY Mini 3K pure carbon Mini 210mm 210 Cross Racing Quadcopter w/ 4mm Main Lower Plate for GEPRC GEP-TX QAV-X

Newest DIY Mini 3K pure carbon Mini 210mm 210 Cross Racing Quadcopter w/ 4mm Main Lower Plate for GEPRC GEP-TX QAV-X

Newest DIY Mini 3K pure carbon Mini 210mm 210 Cross Racing Quadcopter w/ 4mm Main Lower Plate for GEPRC GEP-TX QAV-X

Newest DIY Mini 3K pure carbon Mini 210mm 210 Cross Racing Quadcopter w/ 4mm Main Lower Plate for GEPRC GEP-TX QAV-X

Newest DIY Mini 3K pure carbon Mini 210mm 210 Cross Racing Quadcopter w/ 4mm Main Lower Plate for GEPRC GEP-TX QAV-X

Newest DIY Mini 3K pure carbon Mini 210mm 210 Cross Racing Quadcopter w/ 4mm Main Lower Plate for GEPRC GEP-TX QAV-X

Newest DIY Mini 3K pure carbon Mini 210mm 210 Cross Racing Quadcopter w/ 4mm Main Lower Plate for GEPRC GEP-TX QAV-X

Customer Reviews

Similar Products