Free shipping 2015 Newest DSLogic logic analyzer 16 channels 400M sampling USB-based debugging logic analyzer
Part List: DSLogic Pro core module: x1 USB cable: x1 Shielded wire bundles: x1 Clips for logic analyzer: x16 Part List: DSLogic Pro core module: x1 USB cable: x1 Shielded wire bundles: x1 Clips for logic analyzer: x16 DSLogic is a USB - -based logic analyzer.Based on Xilinx Spartan - 6 FPGA + SDRAM product architecture, can provide up to 400 MHZ real-time sampling, the status of 50 MHZ sampling, sampling depth of 16 M * 16 channel. Technical indicators as shown below: Maximum sampling rate: 4 channels @ 400 MHZ 8 channels @ 200 MHZ 16 channels @ 100 MHZ The onboard storage depth: Total 256 m (16 m samples per channel) Continuous adjustable threshold voltage range: 0.5 V to + 4.5 V The input voltage range: - 30 v to + 30 v Input impedance: 250 kohm Input channel bandwidth: 50 MHZ The largest state sampling clock: 50 MHZ Different from other entry-level DSLogic logic analyzer features basically has the following several aspects Low 256 mbit on-board memory ensure real-time storage of up to 1.6 Gbps sampling data.Entry-level logic analyzer metropolitan to compromise of bandwidth or storage depth indicator, and greatly reduce the practicability of this kind of logic analyzer.Saleae through USB real-time transmission, for example, using PC memory to store data, a good solution to the problem of the depth of the storage, but because of the USB bandwidth limited, the highest can reach 200-300 MBPS sampling bandwidth;Open the Workbench Logic sniffers, adopted FPGA internal BRAM as storage space, also have a 1.6 Gbps sampling bandwidth, but only 216 kbit storage depth.
Combined advanced triggering function, level 16 sets trigger condition for complex easily.Trigger as one of the most important feature of logic analyzer, directly affect the sampling of the positioning accuracy.Most entry-level logic analyzer have advanced triggering function, allows users to find and locate problems in a lot of useless information, waste valuable time.
Use the shield wire jumper wire connector.Shielded cable is a high-end standard logic analyzer, can ensure that the sampling circuit of signal integrity, reduce the sampling signal distortion degree.Entry-level logic analyzer mostly use common dupont ribbon cable to connect the logic analyzer and the measured signal, the impedance discontinuity and elastic problems make the measured signal have serious distortion, which affects the logic analyzer to the measured signal level judgment
Our PC software also USES the open source framework, is now supports up to 44 kinds of protocol parsing function.With the support of the open source community, this number will continue to grow.Everybody can protocol parsing library for this free to make their own contribution