SoliDrop
Welcome, Guest Sign InSign Up

Official Doit Tsd300 Arduino Bluetooth/wifi Control Crawler Tank Car Chassis With Tracking And Obstacle Avoidance Rc Remote Toy

Official Doit Tsd300 Arduino Bluetooth/wifi Control Crawler Tank Car Chassis With Tracking And Obstacle Avoidance Rc Remote Toy
  • Storeszdoit Store
  • List Price$116.00
  • Avg. Price$114.28
  • Your Price$116.00
  • Updated19 hours ago
  • ColorSilver by WiFiBlack by WiFiYellow by WiFiSilver by BluetoothBlack by BluetoothYellow by Bluetooth
  • View OfferBuy from AliExpress
Price Tracker
Price Type
Price Desired
$
Your Email
Create aliexpress price watches
Price History
Product Details
  • TypeTank
  • FeaturesRemote Control,model
  • Controller BatteryOther
  • Remote DistanceOther
  • WarrantyOther
  • Controller ModeMode2
  • State Of AssemblyUnassembled Kit
  • WarningOther
  • Age Range> 14 Years Old
  • Brand NameSzdoit
  • Remote ControlYes
  • Model NumberOther
  • Charging TimeOther
  • DimensionsOther
  • Control Channels2 Channels
  • MaterialMetal
  • DesignOther
  • Charging VoltageOther
  • Action TimeOther
Product Description
This Car kit, is designed based on the Arduino uno board, together with 2-channel & 16-channel servo shield board to drive the tank and 4WD car. You can contol this tank car by Blutooth or WiFi. In addition, there has 4 Infrared Obstacle Advoidance and 2 tracking module. You can contol this tank chassis to track as well as avoid obstacle via Blutooth control or WiFi control.
Provide source code, App and user manual.
More details, please visit: https://github.com/SmartArduino/SZDOITWiKi/wiki to download the source code and the documents.
Arduino UNO Kit: Functional characteristics: Can control 2 road motor and 16 road servo;
Using Bluetooth (reserved-line interface) or WiFi control;
Folding plug design;
Power supply connection method: Circuit break VM and VIN, (individually controlled motor, 6~36V);
Circuit break VS and VIN, (individually controlled servos 6~18V);
Short circuit VM and VIN, and short circuit VS and 5V. Control motor (6~18V) and 16 road 5V servo Simultaneously.
HC-06 Bluetooth Module: Allows your device to both send or receive the TTL data via Bluetooth technology without connecting a serial cable to your computer.
Works with any USB Bluetooth adapters.
Default Baud Rate: 9600,8,1,n.
Built in antenna.
Coverage up to 30ft.
Bluetooth version: V2.0+EDR
Operating voltage: 3.3V
Default Baud Rate: 9600,8,1,n.
Signal coverage: 30ft
Item size: 4.3 * 1.6 * 0.7cm
Item weight: 3g
Package size: 9 * 3 * 1cm
Package weight: 8g
Commercial Series: Bluetooth module board Series
With LED indicator light, use 150mA and 3.3V regulation chip.
With VCC.GND.TXD.RXD foot for the Bluetooth
With "Re-seach" button(ON/OFF/WAKE foot for it , external MCU outinput "High level" can control module to re-seach)
Compatible with bluetooth master module".slave module"or master-slave(whole) module.
Input voltage: 3.3~6V
Size: 1.55cm*3.98cm
Note: input power supply 3.3~6V, Prohibit more than 7V
No "Automatically prevent power supply peversing func", so please correctly connect power supply
We advise to install "Bluetooth master module"
The "State" is output foot for LED status, when bluetooth "Unconnected", output "Pulse" ; when bluetooth "connected", output "High level", we can determine the states from "MCU"
If only the board , No any "Bluetooth Function "
DT-06 Module: Product Introduction: TTL-WiFi is designed and developed based on ESP-M2 WiFi module from our company Shenzhen Doctors of Intelligence & Technology Co., Ltd., which is extracted the TTL, EN, STATE and other pins. Importantly, the TTL-WiFi is already built-in the serial transparent transmission firmware programmed by our company (SZdoit), which can realize the transparent transmit the data to the cloud on the real-time, together with low-power control, status indictor. This board can replace the old wiring serial WiFi device to realize the data collection and control.
More details, please visit this github link to get the manual and tools, https://github.com/SmartArduino/SZDOITWiKi/wiki/ESP8266---TTLtoWiFi
Product Features: Fully compatible with the original electrical interface and physical interface for the serial transparent Bluetooth;
Built-in the industrial transparent transmission firmware V3.0 with stability and reliability by using the Web Configuration;
Built-in the high performance WiFi module ESP-M2 with size: 34mm*17mm*4mm;
Working voltage: 4.5V~6.0V, TTL working voltage: 3.3V (compatible with 5.0V);
Provided pins: STATE, TXD, RXD,EN;
Average current: 80mA; when data sent, it is 170mA; but it is 20μA at deep sleep mode;
Support serial AT command;
Support re-programmable, OTA firmware update;
Seamless transparent transmission between serial and WiFi;
Built-in HTTP Web Server, support configure parameters by web page;
Support re-connect automatically at WiFi STA mode and TCP Client;
Support set baud rate, data bit, parity check, stop bits, and/or subcontracting time;
Support baud rate (bps): 300/600/1200/2400/4800/9600/19200/38400/57600/74800/115200/230400/460800/921600/1843200/3686400;
Support AP enable, self-defined SSID/password, self-defined IP and network duration;
Automatically scan the peripheral WiFi hotspot, support STA enable,DHCP, self-defined IP;
Support TCP Server, TCP Client, UDP Server, UDP Client and UDP local broadcast;
Support DNS resolution automatically for the remote sever address;
Support checking the status by AT command;
Provide IO4 to show the WiFi status;
Working temperature: -40℃-125℃;
Applications: smart home, wireless data connection and transparent transmission, smart car control, wireless serial printer, LED light industrial control etc.
Can control 2 road motor and 16 road servo;
Using Bluetooth (reserved-line interface) or WiFi control;
Folding plug design;
Circuit break VM and VIN, (individually controlled motor, 6~36V);
Circuit break VS and VIN, (individually controlled servos 6~18V);
Short circuit VM and VIN, and short circuit VS and 5V. Control motor (6~18V) and 16 road 5V servo Simultaneously.
Allows your device to both send or receive the TTL data via Bluetooth technology without connecting a serial cable to your computer.
Works with any USB Bluetooth adapters.
Default Baud Rate: 9600,8,1,n.
Built in antenna.
Coverage up to 30ft.
Bluetooth version: V2.0+EDR
Operating voltage: 3.3V
Default Baud Rate: 9600,8,1,n.
Signal coverage: 30ft
Item size: 4.3 * 1.6 * 0.7cm
Item weight: 3g
Package size: 9 * 3 * 1cm
Package weight: 8g
Commercial Series: Bluetooth module board Series
With LED indicator light, use 150mA and 3.3V regulation chip.
With VCC.GND.TXD.RXD foot for the Bluetooth
With "Re-seach" button(ON/OFF/WAKE foot for it , external MCU outinput "High level" can control module to re-seach)
Compatible with bluetooth master module".slave module"or master-slave(whole) module.
Input voltage: 3.3~6V
Size: 1.55cm*3.98cm
input power supply 3.3~6V, Prohibit more than 7V
No "Automatically prevent power supply peversing func", so please correctly connect power supply
We advise to install "Bluetooth master module"
The "State" is output foot for LED status, when bluetooth "Unconnected", output "Pulse" ; when bluetooth "connected", output "High level", we can determine the states from "MCU"
If only the board , No any "Bluetooth Function "
DT-06 Module: Product Introduction: TTL-WiFi is designed and developed based on ESP-M2 WiFi module from our company Shenzhen Doctors of Intelligence & Technology Co., Ltd., which is extracted the TTL, EN, STATE and other pins. Importantly, the TTL-WiFi is already built-in the serial transparent transmission firmware programmed by our company (SZdoit), which can realize the transparent transmit the data to the cloud on the real-time, together with low-power control, status indictor. This board can replace the old wiring serial WiFi device to realize the data collection and control.
More details, please visit this github link to get the manual and tools, https://github.com/SmartArduino/SZDOITWiKi/wiki/ESP8266---TTLtoWiFi
Product Features: Fully compatible with the original electrical interface and physical interface for the serial transparent Bluetooth;
Built-in the industrial transparent transmission firmware V3.0 with stability and reliability by using the Web Configuration;
Built-in the high performance WiFi module ESP-M2 with size: 34mm*17mm*4mm;
Working voltage: 4.5V~6.0V, TTL working voltage: 3.3V (compatible with 5.0V);
Provided pins: STATE, TXD, RXD,EN;
Average current: 80mA; when data sent, it is 170mA; but it is 20μA at deep sleep mode;
Support serial AT command;
Support re-programmable, OTA firmware update;
Seamless transparent transmission between serial and WiFi;
Built-in HTTP Web Server, support configure parameters by web page;
Support re-connect automatically at WiFi STA mode and TCP Client;
Support set baud rate, data bit, parity check, stop bits, and/or subcontracting time;
Support baud rate (bps): 300/600/1200/2400/4800/9600/19200/38400/57600/74800/115200/230400/460800/921600/1843200/3686400;
Support AP enable, self-defined SSID/password, self-defined IP and network duration;
Automatically scan the peripheral WiFi hotspot, support STA enable,DHCP, self-defined IP;
Support TCP Server, TCP Client, UDP Server, UDP Client and UDP local broadcast;
Support DNS resolution automatically for the remote sever address;
Support checking the status by AT command;
Provide IO4 to show the WiFi status;
Working temperature: -40℃-125℃;
Applications: smart home, wireless data connection and transparent transmission, smart car control, wireless serial printer, LED light industrial control etc.
TTL-WiFi is designed and developed based on ESP-M2 WiFi module from our company Shenzhen Doctors of Intelligence & Technology Co., Ltd., which is extracted the TTL, EN, STATE and other pins. Importantly, the TTL-WiFi is already built-in the serial transparent transmission firmware programmed by our company (SZdoit), which can realize the transparent transmit the data to the cloud on the real-time, together with low-power control, status indictor. This board can replace the old wiring serial WiFi device to realize the data collection and control.
More details, please visit this github link to get the manual and tools, https://github.com/SmartArduino/SZDOITWiKi/wiki/ESP8266---TTLtoWiFi
Fully compatible with the original electrical interface and physical interface for the serial transparent Bluetooth;
Built-in the industrial transparent transmission firmware V3.0 with stability and reliability by using the Web Configuration;
Built-in the high performance WiFi module ESP-M2 with size: 34mm*17mm*4mm;
Working voltage: 4.5V~6.0V, TTL working voltage: 3.3V (compatible with 5.0V);
Provided pins: STATE, TXD, RXD,EN;
Average current: 80mA; when data sent, it is 170mA; but it is 20μA at deep sleep mode;
Support serial AT command;
Support re-programmable, OTA firmware update;
Seamless transparent transmission between serial and WiFi;
Built-in HTTP Web Server, support configure parameters by web page;
Support re-connect automatically at WiFi STA mode and TCP Client;
Support set baud rate, data bit, parity check, stop bits, and/or subcontracting time;
Support baud rate (bps): 300/600/1200/2400/4800/9600/19200/38400/57600/74800/115200/230400/460800/921600/1843200/3686400;
Support AP enable, self-defined SSID/password, self-defined IP and network duration;
Automatically scan the peripheral WiFi hotspot, support STA enable,DHCP, self-defined IP;
Support TCP Server, TCP Client, UDP Server, UDP Client and UDP local broadcast;
Support DNS resolution automatically for the remote sever address;
Support checking the status by AT command;
Provide IO4 to show the WiFi status;
Working temperature: -40℃-125℃;
Applications: smart home, wireless data connection and transparent transmission, smart car control, wireless serial printer, LED light industrial control etc.
Name: Caeser TSD300 Damping Tank Chassis
Color: Golden yellow; Silver; Black
Size: About 290*270*100mm(Length*Width*Height)
Weight: About 1.65kg
Design Load: 5kg
Rated Voltege: DC12V
No load Current: 100mA
Voltage: 6-12V
No load Speed: 170-350r/min
Weight: 100g
Name: 25mm gear motor
Output speed: 150±10%rpm
No_load Current: 200mA (Max)
Stall current: 4500mA(max)
Stall torque: 9.5kgNaN
Rated speed: 100±10%rpm
Rated torque: 3000gNaN
Rated Current: 1200mA (Max)
Noise: 56dB
Working voltage: 9V
Outside Shaft Length: 14.5mm
Shaft End Play: 0.05-0.50mm
Screw Size: M3.0
Dia. Of Shaft phi4mm, D3.5
encoder: 2 pulses/circle
Voltage: 12V DC
RPM: 320RPM
Current: 0.55A
Diameter: 25mm
Height (excl. shaft): 68mm
Shaft length: 9.5mm
Shaft diameter: 4mm
Weight: 180g
Brand new and unused
Torque: 13kg.cm
max effective point: load 4.0kg.cm/235rpm/2.5W/0.58A
Max power: load 7kg.cm/215rpm/3.1w/0.65A
Stall current: 4.8A

Official Doit Tsd300 Arduino Bluetooth/wifi Control Crawler Tank Car Chassis With Tracking And Obstacle Avoidance Rc Remote Toy

TSD300 tank chassis: 1 set ESP8266 WiFi UNO shield: 1pcs
Compatible Arduino board: 1pcs
USB Cable: 1pcs
Infrared Obstacle Advoidance sensor module: 4pcs
Tracking module: 2pcs
WiFi module/ Bluetooth module: 1pcs
Scews: several
Note: We are random shipments for the motor. Please leave a message if you have any need. Not including battery because of the prohibition of shipping.

Official Doit Tsd300 Arduino Bluetooth/wifi Control Crawler Tank Car Chassis With Tracking And Obstacle Avoidance Rc Remote Toy

Official Doit Tsd300 Arduino Bluetooth/wifi Control Crawler Tank Car Chassis With Tracking And Obstacle Avoidance Rc Remote Toy

Official Doit Tsd300 Arduino Bluetooth/wifi Control Crawler Tank Car Chassis With Tracking And Obstacle Avoidance Rc Remote Toy

Official Doit Tsd300 Arduino Bluetooth/wifi Control Crawler Tank Car Chassis With Tracking And Obstacle Avoidance Rc Remote Toy

Official Doit Tsd300 Arduino Bluetooth/wifi Control Crawler Tank Car Chassis With Tracking And Obstacle Avoidance Rc Remote Toy

Official Doit Tsd300 Arduino Bluetooth/wifi Control Crawler Tank Car Chassis With Tracking And Obstacle Avoidance Rc Remote Toy

Official Doit Tsd300 Arduino Bluetooth/wifi Control Crawler Tank Car Chassis With Tracking And Obstacle Avoidance Rc Remote Toy

Official Doit Tsd300 Arduino Bluetooth/wifi Control Crawler Tank Car Chassis With Tracking And Obstacle Avoidance Rc Remote Toy

Official Doit Tsd300 Arduino Bluetooth/wifi Control Crawler Tank Car Chassis With Tracking And Obstacle Avoidance Rc Remote Toy

Official Doit Tsd300 Arduino Bluetooth/wifi Control Crawler Tank Car Chassis With Tracking And Obstacle Avoidance Rc Remote Toy

For the shipping convenience, the tank/car chassis is unassembled.

Official Doit Tsd300 Arduino Bluetooth/wifi Control Crawler Tank Car Chassis With Tracking And Obstacle Avoidance Rc Remote Toy

1. Preparing Time: we need 2-5 working days to prepare your order according to our numerous orders every day.
2. Free Shipping for worldwide if you choose China Post.
Note:
The information of new tracking number for China Post Ordinary Small Packet Plus can not be tracked when it is shipped out of China. Whether it is arrived or not,it will no more tracking information.
Please choose China Post Air Mair if you want a full tracking information.
Tracking information of China Post Ordinary Small Packet Plus can be checked here: www.17track.net.
Official Doit Tsd300 Arduino Bluetooth/wifi Control Crawler Tank Car Chassis With Tracking And Obstacle Avoidance Rc Remote Toy

1. If you are satisfied with our products and services, please leave your positive feedback and 5 stars, and 5 stars for the detailed rating of your order. Once you show us the screenshot of both 5 stars, we will give you $3 DISCOUNT for each order over $50 in your later purchase.
2. If you share our product link on your SNS or Facebook, we will give you $3 DISCOUNT for each order over $50 in your later purchase as well.
3. If you are not satisfied with our products, pls contact us before you leave neutral (3 stars) or negative (1-2 stars) feedback. We guarantee we will 100% slove any problem for you.
4. Please email to us before leaving the negative feedback or opening any dispute on the site. Communication is the best way to solve the problems.
Customer Reviews
Related Products