dog training collar,remote dog training collar, electric dog training collar,remote pet training collar,cheap dog training collar, leather dog collar,led dog collar,large dog collar,electric dog collar,spiked dog collars for pitbulls,pet collar dog,pet,dog collar,dog,dog harness,dog leash,mascotas perros,coleira para cachorro,pets,collar,perros,collar perro,pet products,arnes perro,dog tag,perro,dogs,for dogs,products for pets,collier pour chien,chien,collier chien,collars for dogs,harnais pour chien,mascota,leather dog collar,dog collar,pet supplies,retractable dog leash,collar adiestramiento perros,dog bandana,harness for dogs,correas para perros,pet accessories in china,dog lead,collar dog,coleira anti latido,small dog harness,led collar,dog collar led,clicker,dog training collar,tag pet,dog led,collar electrico perro,collar adiestramiento,hond,dog collar leather,collares adiestramiento para perros,coleiras para cachorro,accessories dog,lazos para perros,belt dog,arnes correa perros,correa retractil perro,clicker for dogs
agility dog,agility dog equipment,agility dogs,agility equipment dogs,agility training equipment,agility training equipment dog,anti bark collar,anti bark controller,anti bark no barking,anti bark vibration,anti barking,anti barking collar,anti barking collar dog electrical,anti barking collar waterproof,anti barking device,bark collars,bark collars dogs,bark control,bark control dog,bark control ultrasonic,bark ultrasonic collar,barking collar,beeper,beeper dog,beeper for hunting,cheap dog training collar,clicker dog,clicker dog training,clicker for dog,clicker for dogs,clicker training,clicker training dogs,clickers for dogs,collars for dogs,dog accessories,dog agility,dog agility equipment,dog agility training,dog agility training equipment,dog anti bark,dog bark collar,dog barking sound vibration,dog barrier fence,dog beeper collar,dog beeper for hunting,dog bites,dog chaser,dog clicker,dog collar,dog collar 1000m waterproof,dog collar anti bark,dog collar anti ladridos,dog collar bark,dog collar beeper,dog collar electric,dog collar electric waterproof,dog collars,dog collars anti bark,dog collars for dogs,dog control,dog dress,dog dresses cheap,dog dresses princess,dog duck mask,dog electric collar with remote controller,dog electric fence,dog equipment,dog fence,dog fence for 2 dog,dog fence waterproof,dog frisbee,dog harness,dog key cover,dog keychain,dog leash,dog mat dog bed pet,dog muzzle,dog obedience,dog package,dog pee tray,dog pet barrier,dog pet stop barking collar anti bark,dog repelent,dog repeler,dog repellent,dog repeller,dog repeller training trainer,dog repeller ultrasonic,dog shirt,dog shock collar,dog snack bag,dog snacks,dog supplies,dog trainer,dog trainer bark stop,dog training,dog training bag,dog training beeper collar,dog training collar,dog training collar 1000m,dog training collar electric,dog training collar electronic,dog training collar rechargeable waterproof,dog training collar remote,dog training collar waterproof,dog training device,dog training shock,dog training shock collar,dog training supplies,dog training whistle,dog treadmills,dog treat bag,dog treat bags,dog treat pouch,dog ultra sound,dog ultrasonic,dog ultrasonic stop barking,dog vest shirt,dog whistle,dog whistle training,dog whistles,dog whistles to stop barking,duck mask,electric collar,electric collar dog,electric collar for dogs,electric collars,electric dog collar,electric dog collar medium dog,electric dog collar training,electric dog collar training waterproof,electric dog collar waterproof,electric dog control,electric dog fence system,electric dog rechargeable collar,electric dog training collar,electric fence,electric fence for dogs,electric fencing,electric shock collars for dogs,electric shock device,electric shock dog collar,electric shocker,electrical fence,fence dog,fence dogs,fencing equipment,hunt dog,hunting,hunting and dog,hunting beeper,pet agility,pet bed,pet black collar,pet clicker,pet dog,pet dog adjustable,pet dog training collar,pet dogs treat bag,pet fence,pet fencing system dog fencing dog collar pet 803,pet heating mat,pet products,pet products for dog,pet shirt argentina,pet shop,pet sling,pet supplies,pet supplies dog,pet toilet,pet toys,pet toys for dog,pet trainer,pet training,products for dogs training,remote dog training collar,remote dog training collar aetertek,remote dog training vibration collar,remote pet 300m,remote pet trainer dog electric shock,remote pet training collar,remote pet training collar with lcd display 300m,training bite dog,training collar,training collar for dog,training dog collar,training dogs,training equipment,training for dogs,training of dogs,ultrasonic aggressive dog deterrent,ultrasonic anti bark stop barking dog,ultrasonic bark control,ultrasonic collar,ultrasonic collars bark control,ultrasonic dog,ultrasonic dog bark stop,ultrasonic dog deterrent,ultrasonic dog repeller,ultrasonic dog repeller agg,ultrasonic dog whistle,ultrasonic pet dog,ultrasonic whistle,dog fence,dog playpen,pet fence,pet products for dog,plastic fence for dogs,plastic playpen for dog,playpens for dogs.
belt dog,arnes correa perros,correa retractil perro,clicker for dogs
transmit the signal to Receiver Collar
2. LED lamp:
the lamp will light when you press the button of LED light
3. LED Indicator lamp:
the light will flash when the transmitter is working. The lamp will light when it is being charged.
4. LCD Screen:
Static mode: under this mode, press "Y" button, Receiver will shock; press up/down button, can adjust the level of Static shock from 0 to 100.
Vibration mode: under this mode, press “Y” button, Receiver will vibrate; press up/down button, an adjust Vibration level from 0 to 100.
Beep mode: under this mode, press "Y" button, Receiver collar can get beep sound.
Light mode: under this mode, press "Y" button, the green LED light in the Receiver will flash every one second, it is convenient to let you know where your pet is.
Channel 1: select to encode between transmitter and one of receiver collar
Channel 2: select to encode between transmitter and 2nd of receiver collar
5. Up/down button:
intensity level button for Vibration and Static Shock
6. LED lamp button:
when pressing the LED light button, the lED lamp in the Transmitter will light
7. Channel button:
press the button, can select to encode between transmitter and one of receiver collar, or another one
8. Launch button:
after you finish mode select, press this button for confirmation.
9. Mode button:
include 4 modes: Static Mode, Vibration Mode, Beep Mode and LED lamp mode
10. Charging hole:
charge for Remote Controller
11. Contact points:
deliver the safe static correction
12. Rest hole:
turn on/off the receiver
13. DV-5V hole:
charge for receiver
1. Charge the remote transmitter/receiver:
1) Connect the charger\'s connector to the charging jack (DC-5V hole)
2)Connect usb cable for charging
3) The red light on the transmitter will be lighted
4) Charge the transmitter/receiver at least 6 hours for the first charge
5) After fully charged, the red LED lamp will be turned off automatically (Important note: Low battery indicator: the symbol will show on the LCD screen)
2. Connect transmitter and receiver:
1) Turn on the transmitter by pressing any button on the transmitter
2) Press "1/2" button to choose channel for connection, choose channel 1 for the first receiver
3) Lift the rubber cover of the Reset part on the receiver. Press the Reset button inside of the receiver with a pen or paper clip, and the green LED light will turn on
4) After a Beep came from the receiver, press the "Y" button on the transmitter within 10 seconds
5) The collar receiver will beep if successfully connected
6) Press "1/2"button to encode, choose to channel 2 for second collar by the same procedure
1. The transmitter will go into Standby Mode after 20 seconds if there is no operation and turn off after 20 minutes
The receiver will go into Standby Mode if unused for 4 minutes. Any movement will activate the receiver.
2. "1/2" button to choose channel for connection. In channel 1, can only train the first receiver, in channel 2 train the second receiver
3. In working mode, if you want to reconnect the receiver, simply use a pen or paper clip, press the reset button, there is a beep sound that indicates that it’s ready to encode
4. The receiver is designed to be waterproof. The rubber cover has to be put in the right position
1. The lifetime of the batteries depends on how often you use the product. Therefore you should often check the batteries by hear the beep from the Collar Receiver and watching the indicating on the LCD screen of the transmitter
2. The valid distance of remote control means the straight-line distance between the transmitter and the Collar Receiver without obstacle. If there is interference signal or signal screening around, the actual remote control distance may be various.
3. This product is for pet training. Only by training, the pet can understand the intention of it power. Good effect can only be achieved after a period of training
4. Training session should be kept positive and short, about 10-15minutes long each time.
5. Presently, this product is the most effective and the safest tool for pet training. Follow the correct operational instructions, you can effectively train the pet and bring it no harm.
1x Test light
2xLong metal probes
2xShort metal probes
1. Both Remote Transmitter and Receiver Collar are energy-saving designed. The Remote Transmitter will go into STANDBY MODE if there is no operation after 1 minute, and by pressing Mode button you can activate the transmitter from Standby mode. The Receiver Collar will go into Standby mode if no operation for 4 minutes. And any movement will activate the Receiver.
2. A startup roller is contained in Receiver Collar, so you will hear sound when the collar is shaking, don\'t mistake it as any parts falling off.
1. Press Mode button to turn on Remoter Transmitter and adjust levels of Vibration and Static above 0.
2. Press “1/2” button to select a signal channel.
3. Open the rubber cap and press the switch button inside Receiver, which beeps once to indicate the Receiver is on.
4. Press Y button within 10 seconds to encode the signal, at the same time, the Receiver beeps once.
5. If you fail to press Y button within the 10 seconds period, please repeat steps above.
6. If you have 2 Receiver Collars, press again “1/2” button to select another signal channel for transmission encoding.
You need charge this product before you start using it for the first time.
1) Connect Remote Transmitter to a charger into a standard socket.
2) LED Indicator on Remote Transmitter turns red when charging.
3) Once Remote Transmitter is fully charged, the red LED indicator turns off automatically.
1) Open the rubber cap, connect Receiver Collar to a charger into a standard socket.
2) LED Indicator on Receiver Collar turns red when charging
3. After being fully charge, LED indicator turns yellow and goes into Standby mode if there is no movement.
1) Charge the Remote Transmitter and Receiver Collar at least 6 hours for the first charging.
2) Functions of Receiver Collar are disabled and out of control of Remote Transmitter when being charged.
3) Low battery indicator symbol will be displayed on LCD screen.
4. Receiver Collar keeps beeping continuously if its voltage is under working level.
5) This product is rechargeable. To maintain its proper functions, please charge once a monthly if it is not used.
Remember your signal channel setup and don\'t change it frequently, otherwise remote control does not work!
LED flash function test:
Q: How old does my pet have to be before using 998D Pet Training Collar?
A: Your pet should be able to recognize basic obedience commands such as ”Sit” or “Stay”. 998D Pet Training Collarmay be worn by most dogs of 25 kilograms and some dogs slightly over 25 kilograms.
Q: Once my pet is trained and has been obeying my commands, is it still necessary for my pet to continue to wear the Receiver Collar?
A: You may need to reinforce your pet\'s memory with the Receive Collar from time to time.
Q: Can I use 998D Pet Training Collar with more than one pet?
A: Yes, you can simply add one more Receiver Collar to the system to control two pets, because two signal channels are available with the Remote Transmitter.
Q: What is the effective distance of your Pet Trainer?
A: The effective distance could be as far as 300 meters between Remote Transmitter and Receiver Collar without obstacles in between. However in reality, a list of factors, including but not limited to signal station, magnetic field, obstacle, battery volume, other wireless devices nearby, landform, vegetative cover, etc, shall influence transmission of signals from Remote Transmitter and the actual effective distance of Remote Transmitter.
Q: I want to test Static Shock function of Receiver Collar myself, but it does not work, is anything wrong?
A: If you test Receiver Collar by your hand or leg, please touch the 2 screw caps (electrodes) at the same time, touching only one screw cap (electrodes) will not work.
Q: How long can I continuously deliver vibration or Static Shock to my pet?
A: The maximum amount of time you can press the Vibration or Static Shock to your pet continuously is 10 seconds. After this, the Remote Transmitter will time-out, and you have to release Y button and press Y button again to restart Vibration or Static Shock function.
Q: Is the Receiver Collar of 998D Pet Training Collar waterproof?
A: Your pet can wear it when drinking water or in rainy days, however your pet can\'t wear it when swimming or diving.
Q: What do I do if my pet\'s neck becomes red and irritated?
A: Discontinue use of the Pet Trainer for a few days. If the condition persists beyond 48 hours, see your veterinarian. Even if the skin returns to normal, monitor your pet\'s skin condition closely.
Q: Can I attach a leash to the Receive Collar?
A: NO. This can result in pulling the Screw Caps (contact points) too tightly against your pet\'s neck. Use a separate collar placed above the Receiver Collar.
Q: How will I know when to charge the batteries of the Pet Trainer?
A: For Remote Transmitter: the symbol will show up on the right down side of LCD screen. For Receiver Collar: if you hear continuous beep sound, you have to get it charged.
Q: How long is your lithium battery lifetime?
A: Our Lithium battery can be charged 400 times for remote Controller and Receiver Collar.
Q: How long can I leave Receiver Collar on my dog?
A: The Receiver Collar is not designed to be worn constantly. We recommend the Collar not be worn for more than 18 hours out of every 24-hour period. In case of longer time, you are advised to examine your pet regularly.
Q: How long should I process my training session for my pet?
A: Training sessions should be kept positive and short, it is better for about 10-15 minutes long each time.
Q: How long is the Receiver Collar?
A: Total length is 60CM, just trim it to proper length if it is too long.
Q: What are the proper levels of Vibration and Static Shock for my pets?
A: Try to find the best suitable levels of Vibration and Static Shock for your pet starting from the lowest level. Excessive levels of stimulation shall cause strong response from your pet.
Q: Any other better training methods?
A: You can prepare some dog food for training incentive to achieve better training outcomes.
Each time after you restrain your pet\'s misbehavior, you can tell your pet what is supposed to do and what is not supposed to do. And after a number of repetitions your pet understand what you like and what you don\'t like.
Q: How long will it take to get my pet trained well?
A: It takes time to eliminate a misbehavior or teach an obedience command. Please be patient. Overquick training may not lead to ideal outcomes.
Q: The 998D Pet Training Collar does not work, or my pet does not respond after correct installation of the Pet Trainer, how should I solve this problem?
A: Make sure both Remote Transmitter and Receiver Collar have enough power to operate.
Intensity level has to setup at over ”0” when encoding, test to launch for Vibration and Static Shock function.
Check to see if Receiver Collar is turned on.
Check “1/2” button on Remote Transmitter to ensure Signal Channels are correctly configured.
Try re-encoding Remote Transmitter and Receiver Collar.
Take off Receiver Collar and test all of the four functions work properly.
Receiver Collar goes into Standby mode after 4 minutes without movement. And any gentle movement can activate it.
Make sure Receiver Collar is properly worn and the collar can\'t be too loose.
Trim your pet\'s fur where the screw caps (contact points) touch the neck and/or change to the longer contact points.