Free Shipping RGBW DMX decoder, Constant Voltage LED Driver, 4 Channels/12V-24V/20A/480W
2.256-levels brightness,full-color with driver controls.
3.Power without flashing, low jitter free.
4. 4 output channels, single channel maximum 5A output drive, total output is less than 20A.
5.Can achieve asynchronous color changes effect under working with controller.
6.With the light color selected mechanism, and be able to control the light with 1~4 colors.
7.Setting the DMX address freely.
8.Modularizing and can be matched with different LED module neatly.
9.Through the LCD1602 screen display menu.
Operating instructions: product panel can display content through the LCD display, through the mechanical switch menu options, adjust the internal procedures and address code. As press the key HOME
, call up the DMX512 external control and internal dimming program menu, set address code and adjust the brightness can be adjusted according to press UP/DOWN
respectively. Wiring Diagram
DMX-512 Control signal connection
1.DMX signal cable is made of twisted pair (line), DMX signal includes positive and negative end, in pressure welding DMX signal line plug should pay special attention to polarity. DMX512 controller input and output RJ45 interface: PIN1 is signal positive, PIN2 is signal negative, PIN7.8 is signal ground, please corresponding polarityconnection.2.DMX5000 output and DE8036\'s transmission lines can\'t be over 300 meters.3.DMX5000 each interface can with not more than 170 pieces of DE8036. Eight output interface. Through the JBLED FLASH light making software and can with computer on line control. Realize infinite connect the DMX lights.4.When contacting 32 pieces of DE8036, DMX signal must add a signal amplifier RE2000 . Cascade can\'t more than 4 PCS.
5.At the end of the connection, we should connect a DMX signal finalizer ( Put down the code switch no.10 of DE8036 dial).