Kindly Notes:we don\'t surggest the switch will be connect wireless camera,and all product can support PAL or NTSC
,but don\'t support PAL and NTSC at the same time.
,but don\'t support PAL and NTSC at the same time.
4 channle Panoramic Image System four views recorder and Overall Monitoring Traffic Recorder Perfect Combination
it can support max.64G TF
you can select single control box or control box add 4 cameras
(In order not to affect the transport speed,we will not place the battery
because It is difficult to pass security checking for prodcut battery,if you need the battery , please contact us)
below is about default four car cameras(if you have special requirement.please contact with us)
There are 7 colors for the side camera ,default color is black, if you want other color,please have to leave message.
rear camera details
( 1)Before using TF card format: TF card is inserted, power boot into POST mode (display automatically turns off after five seconds into standby) by remote control Button is on, press ESC or Stop recording (The default boot automatically start recording), press the "MENU" button to enter the first page of the menu, press again to switch SETUP menu page, select FORMAT, press the "REC or ”,Press the left and right buttons to select EXECUTE, press "ESC or ” Formatting.( 2 )Modify the system date and time: Press the "MENU" button to enter the menu, press the switch to the SETUP menu page, select DATE INPUT again, press "REC or ”Key to enter the interface, press the "left" or "right" key to switch to the SET, press "REC or "Button to enter the date and time by switching the left and right, press" MENU "button to confirm and switch, press" REC or "Button to confirm, press the" MENU "to exit.( 3 ) Playback: Press "ESC or "Stop video playback again, press“ ”Key to enter the Playback menu, press the "left" or "right" button to select the video file, press "REC or "Button to select the playback, press the" MENU "button to fast forward.P.S.Blue background is selected, the yellow background is not selected.Ⅱ.Parking Monitor Description
Parking monitoring starting voltage must be greater than 12.5V (car batteries generally 13-14V), then the battery power, and a fifth DIP switch to dial up sign Parking REC
This product has a power loss protection, voltage less than 11.5V off automatically enter the sleep state, when the voltage is restored back to normal will automatically open parking video surveillance state.Ⅲ.Frequently Asked Questions
Question 1: SMD Tact switch function?
A: Long press (more than 1 second), the device starts to work, automatic image display screen (the default screen is H), long press again, the device enters the standby state; (Note: Press 1 second, the device starts, but Car navigation display screen response time takes about 1 second.)
Short press (less than 1 second), single-screen and "field" screen to cycle;
Question 2: 4 trigger lines how to wire?
A: Line 1 (Green) is a front view of the trigger wire, before the next depending on the assist lamp or other neutral switch place; the 2nd line (white) left, as the trigger line, then turn left positive light; the 3rd line (yellow) to reversing trigger line, then reversing light positive; Line 4 (blue) to the right, as the trigger line, then turn right at lights positive
Question 3: How to connect car navigation screen?
A: The device video output line connected car navigation screen, reverse video input port, the red line equipment output port connected to the reversing vehicle navigation screen test line, some car navigation screen video input is automatically detected, so reversing the test line can be removed.
Question 4: Why is there no output device?
A: Please check whether the device POWER Power lamp blinks, and if yes, then the device into standby mode, the output is off, press the power switch on the remote control or press the patch trigger switch device is turned on, POWER light long bright, video output device.
Question 5: Why dial left or right turn lamp lights, equipment no image?
A: The equipment in standby mode, dial left or right turn lamp lights, is not shown, because the normal driving, the driver will often toggle turn signal, if activated every time the screen display, it will affect the driver\'s driving safety a. If you intend to observe the situation around, press and touch switch or remote control to open the key.
Question 6: about the camera connected to where?
A: The camera can be connected at the bottom of the rearview mirror, you can monitor the front direction, because the left and right front wheels are usually dead, rear wheel rearview mirror, the normal camera monitoring is not required.
Q 7: power input line device connected to where?
A: Red power cable ACC (ie car ignition point), black ground (or Ground). As signs Parking REC, red power cable can be connected to the car battery positive (Note: the 5th DIP switch to the top).
Power Led, when energized, the lights lit; when the system enters standby mode, the power light flashes. Status status lights, video flashes, when not recording continuously. This product is the normal input voltage 9V ~ 36V (the parking monitor is 12.5V ~ 36V).