Triac dimmable driver, Traic dimming driver, pwm led driver,1channel/12V/24V/10A/240W
1.Triac dimming,input dimming signal:AC20~220V.
2.Support all the triac dimming system,such asLu-tron,Dynamite,Clip-sal,LDS,Os-ram.
3.Single channel constant voltage output dimming control, output MAX.10A
4.No flicker,the dimming curve smooth.
5. Can realize 0 ~ 100% brightness range dimmer.
6. Custom-made available.
According to the product connection diagram, the load LED and power connect to the right port by the positive and negative, open the power supply,adjust the Triac controller voltage, so as to change the output of the controller, until satisfactory LED output luminance so far.
1. No power from plug
2. At black mode3. Overload Recovery4. Incorrect connection1 Change the socket
2. Change the running mote3 Lighten load, react4 Check the connection
1.AC20-220V dimming signal input can get 0%-100% brightness output,and the dimming curve smoothness is proportional to the input dimming signal.If the brightness can’t get to 0% ,please check the AC20-220V dimmer whether can get to the lowest dimming voltage. If the brightness can’t go to 100%,please check the input voltage whether can get to the hightest voltage.
2.Input voltage must be fit the production work voltage.
3.Do not overload.
4.Before commissioning of the power,should ensure that all wiring is correct before electricity.
5.If failure,do not privately maintenance,please contact the supplier.
1. Professional buying advice according to your needs.2. Instant response to your inquiries.3. Short lead-time, quick delivery.4. Three years warranty for all of our products. 5. Samples orders, OEM/ODM orders are also welcomed.