TV+HDMI+VGA+AV+USB+AUDIO TV LCD driver board 22" LTM220M1-L01 M220Z1-L03 1680*1050 LCD controller board DIY kits
This is a great set of easy-reassembling LCD controller kit which is used to turn a bare LCD panel
22" LTM220M1-L01 M220Z1-L03 1680*1050 into a desktop/PC monitor. It will be a surprise that your bare LCD will be of good use, and no longer be a waste. Or it is a very insteresting things that we make a monitor successfully by ourselves. Giving your lcd a new life with your fantastic idea.
The controller board size: 190 mmx43mmx18mm Necessary Accessories for turning a LCD to desktop monitor: LCD Controller board, Inverter, LVDS cable, Keypad, VGA cable, Power Adapter. If you have already had a VGA cable and a power adapter (12V,4A), Necessary for a desktop display LCD light fittings: 1. LCD controller board 2. inverter 3. An LVDS cable 4. 5 key keyboard and cable 5. VGA cable/AV cables/HDMI cable (not included) 6. The power adapter. (not included)
Warm prompt: If the wrong input software or your LCD screen damaged, there\'s no need to worry, you can use the USB software upgrade, change into your good LCD screen, so as not to cause waste or idle items. (but different LCD screen type is different Screen or Inverte may be different, you can contact us, we can give you the right product) Only need to use a usb stick you can follow to replace all an LVDS interface LCD procedures; And buy driver sent procedures, The upgrade method: Copy screen of the program to the U dish in the U disk inserted into the plate on to the USB port on the keypad, electricity again, until you see the flashing in the indicator lights on the keypad appears red, green, after, until after the indicator light flashing, unplug the power, then pull out U disk with respect to OK energizing can.. (note that write programs do not power outages, crashing won\'t be able to use)