Dear friends! Have a good News from RATTM MOTOR, we have warehouse in UK AU and USA, Ship from UK AU and USA to European Union Customers AU and USA, No taxes, Low shipping and international standard shipment by DHL/UPS! Delivery USA not contain Alaska and Hawaii These European Union countries are free taxes in customs:
Other countries order still send from China!!
1. Products brief introduction USBCNCV4.0 is a high performance motion controller which based on PC software USBCNC control, the system can complete the conversion from G code to connect stepper motor’s driver motion control signal without requiring any additional hardware and software. This control card is compatible with most stepper driver and servo driver,it is a perfect controller that instead of parallel Mach3 interface board. Minimum configuration: 1) CPU:1GHz 2) Memory: 512MB 3) 500MB free disk space 4) DIRECTX9 graphics device with WDDM 1.0 or higher driver 5) USB 2.0 interface 6) Net FRAMEWORK 3.5SP1 The recommended configuration: 1) CPU:2GHz dikaryon 2) Memory: 2GB; 3) 1G free disk space 4) DIRECTX9 graphics device with WDDM 1.0 or higher driver 5) USB 2.0 interface 6) Net FRAMEWORK 3.5SP1 3.Production feature 1. After the revision,V4 version using the red PCB board, PCB size is 135.3*82.5mm.; 2. The front of the narrow edge placed with USB communication interface and DB9 hand control interface for the convenience of customers drawn from the case panel directly; 3. The back-end of narrow edge is power input and output interface and 3 relay output interface; relay is strong interference source, relay away from the design of main control chip, it is conducive to the stability of the board; 4. One of the two wide sides is stepper motor and principal axiscontrol signal output; 5. The another side of two wide sides is the emergency stop, manual speed input, limiting input interface; one side for the input, another side output connection mode is simple and convenient; 6. 5V and 12V power module compact independence, security, stability; 7. External ensure the stability of the system work effectively with crystal active and main control chip shield; 8.outline dimension is 135.3*82.5mm, product positioning hole installment dimension is 127*75mm 9. The software is USBCNC,not mach3,pls note! 2.
FMD2740A stepper motor stepping motor driver 50V/4A FMD2740A driven by Japanese sanyo\'s chip,After multiple optimize R & D and production of high-subdivision 2-phase stepper motor drives, suitable for driving small and medium-sized phase current is less than 4A 2-phase or 4-phase hybrid stepping motor. Due to the adoption of the new bipolar constant current chopper drive technology, using the same motor can output more speed and power than other drivers. Segments stepper motor running accuracy improved, reduces vibrations and noise reduction. Description: 1)High-performance, low price 2)Bipolar constant current chopping mode 3)Power supply voltage 12 to 40VDC 4)High-speed optocoupler signal isolation input 5)20kHz chopping frequency 6)Subdivision precision 2\\8\\16\\32\\64\\128\\10\\20 optional 7)Electrical input signal is TTL compatible 8)Stationary current is automatically reduced by half 9)Shape design is convenient for installation 10)Maximum drive current is 4A 11)Drive any 4A phase current of 2-phase or 4-phase hybrid stepping motor
3. Stepper Motor
Technical Specifications Part No.: 23HS2430B Frame Size: NEMA23 Step Angle: 1.8 degree Current: 3.0A/phase Resistance: 1.6 Ohm/phase Inductance: 6.8 mH/phase Holding torque: 280N.cm/18kg-cm 425 oz-in Rotor inertia: 800g-cm2 Number of wire leads: 4 Weight: 1.66 kg Length: 112mm Datasheet(23HS2430,Front shaft 8mm dia and 21mm length,back shaft 8mm dia and 11mm length,425 oz-in or 28kg.cm holding torque)
Motor lead wires:
RED A+ GREEN A- YELLOW B+ BLUE B- 4.Switching power supply
400W,Input:100-120VAC or 200-240VAC,50/60Hz,Output:36v/11 A,single output switching power supply Shipping
DHL/UPS 5-8 business days EMS 4-10 business days China post air parcel 15-25 business days Payment Problem&Feedback Refund Contact us