Under Cabinet LED Lights 6 Lamps Set
with Wireless RF Remote Control for Kitchen Closet Counter Shelf Accent Decoration Lighting
Safe to use. The working voltage is 12V DC. touchable and safe to children.
6 lamps with 10 levels brightness levels, RF wireless controller and adapter included.
Splitter box can connect up to 6 lamps, 1.5m length power cord of each lamp,1m length adapter DC wire.
It comes with magic HOOK&LOOP adhesive tape, Screw-free, Protecting your furnitures and easy installation.
Ultra-thin fashion, aluminum shell. Eco-Friendly. Flood beam angle. Beam angle is 120°
- Color option: Warmwhite, White.
- Convenient: Adhesive tape can support more DIY designs.
- Safety: CE, RoHS, GS for whole set, UL listed adapter.
- Energy-saving: save up to 85% energy.
- Long life span: 40000 hours.
- Adaptor(X1) Input:100-240Vac, Output:12V, 2A with 1 meter cable - Controller(X1) 11-key RF wireless remote controller (the Remote controller uses a CR2025 battery, Please note: battery is not included in the package
) - Cabinet light (X6) 6pcs round cake LED lamps with 1.5m cable. - 3M adhesive tapes (X6) RF remote controller:
Battery: 3V, type Cr2025 (Please note: battery is not included in the package
) Controller distance:10m Cabinet light:
Input voltage:DC12V LED quantity:9PCS 5050 LEDs Power: 2W per lamp (12-15W in total)
Suitable for commercial and residential application like office, supermarket, shop, school, hotel, restaurant, workshop, warehouse, home, museum etc.
window, wall, ceiling, cabinet, desk, bed, table, back of TV, computer, etc.
1. Connect LED controller with cabinet lamps
2. Connect power adaptor with LED controller
3. The remote controller is used alone
RF Wireless Remote LED Controller Instructions
Specification Dynamic mode 8 modes Dynamic speed level 10 levels Lighting brightness level 10 levels PWM grade 256 grades Smooth dimmer effect Yes Working voltage DC12-24V Output current Peak 6A Remote control mode RF Wireless Remote frequency 433.92MHz Remote distance more than 15m at open area Functions
1. Turn On/ Standby Press this key to turn unit or switch to standby mode. Unit will turn on and restore to previous status at powering on moment. 2. Lighting mode Switch to lighting mode from dynamic mode. 3/8/9. Dimmer Adjust Shortcuts Switch to 100%, 50%, or 25% brightness lighting mode. 4/6. Dynamic Mode Adjust Switch to dynamic mode from lighting mode, or switch between different dynamic modes. 5/7. Speed Adjust Adjust playing speed of dynamic modes, Press SPEED+ to increase Speed and press SPDDE- to decrease. Caution: the button 7 is the code key, such as a remote control without reaction is like. Please in the controller power on 3 seconds long press the button 7 Re code. 10/11. Brightness Adjust (Dimmer) Adjust lighting mode brightness. Press BRIGHT+ to increase brightness and press BRIGHT- to decrease. Installing
1. Power Supply This unit accepts DC12V to 24V power supply. The red cable should be connected to positive and black cable to Negative. Please select power supply according to the LED application. 2. LED output The red cable should be connected to LED positive and black cable to negative. The peak output current is 6A, Please reduce load if main unit is overheating. CAUTION! Do not short circuit the LED output, this may lead to permanent damage!
3. Remote Control
Please pull out the insulate part before using. The RF wireless remote signal can pass through barrier, so it’s not necessary to aim at the main unit when operate. For proper receiving remote signal, do not install the main unit enclosed metal parts. The remote battery is 3V CR2025 type, please only replace with same type battery. Everbrite Opto Limited Must Read Before Ordering: Shipment:
1. If you want fast and trackable shipment, please do not choose \'China Post Ordinary Small Packet Plus\' and \'Posti Finland Economy\'. Because these shipments are not tracked and can be very slow. 2. Advised to make your every single order amount >7USD, because for order amount 7USD, because for order amount 7USD, because for order amount