this waterproof case for Sony NEX-6 18-55mm /16-50mm is suitable for taking photos or videos underwater up to about 40 meters, With proper size,you could operate it easily. Freely capture the underwater world when you are diving at holidays. Have fun! Meanwhile,this case could protect your camera well in the water. Worthy having,just buy it directly!
Brand New,High quality
Compatible Model: Sony NEX-6 18-55mm /16-50mm
Pattern: Waterproof case
Waterproof distance: About 40 meters
Material: Polycarbonate, ABS plastic,clear plate glass,stainless steel, EPDM rubber and etc
'O' ring seaed with spring loaded
1/4" tripod screw on the bottom.
Protect your digital camera from scratches,dirts,water and etc.
Ideal for diving at sea,surfing,snorkeling,skiing,yacht or other actuvities.
Also suitable for rainy,snowy and etc environment.
Custom made to fit your digital camera perfectly.
Applicable Temperature: 0-40°(32-104°F)
Third Party Products,not made by Sony!! Package included:
1 x Waterproof case for Sony NEX-6 18-55mm /16-50mm
1 x Neck strip
1 x Wrist rope
1 x O-ring gasket
1 x Cleaning Fluid
1 x Use Manual
Checking before Using:
Check if the water proof camera housing in good condition everytime before using it, make sure there is no sand or dust;
After coating waterproof oil, fill-up all tissues inside the case, and then close the case, put the case to at least 200MM depth of water and keep for at least 5 minutes, make sure there is no water get in.
After above two steps checking, you can put your camera in and use it freely now.
Maintenance after using:
Using fresh water to wash the inside of the case, do not use water tempreture higher than 40 celsius degree, otherwise will hurt the waterproof case
If use it in deep sea area, do wash it much longer time, suggest put it in fresh water for several hours
Make sure all the waterproof case inside the fresh water, including the safety lock of the waterproof case
After wash it cearly, use soft cloth to make it dry lightly, and put in the shade ventilated place to dry it
Residual seawater will damage the metal part of the case, it will hurt the button, hinge and lock
Do use clean and soft cloth to clean the inside of the waterproof case
O-seal ring must be washed cleanly after take down, and use the seal bag to keep it safe; or put it on the waterproof case but not lock the case, to keep the o-seal flexible enough; whole box put into seal bag and keep it dry and safe, it will protect the waterproof case and make it work much longer time Note: When underwater over 25-30 meters, there's a rate to appear that the buttons on case can't be pressed well and easily.