SoliDrop
Welcome, Guest Sign InSign Up

Waveshare Stm32 Core Board Stm32F405Rgt6 Stm32F405 Stm32 Arm Cortex-M3 Stm32 Development Board Kit With Full Ios = Core405R

Waveshare Stm32 Core Board Stm32F405Rgt6 Stm32F405 Stm32 Arm Cortex-M3 Stm32 Development Board Kit With Full Ios = Core405R
Price Tracker
Price Type
Price Desired
$
Your Email
Create aliexpress price watches
Price History
Product Details
  • Model NumberCore405R
  • Demo Board TypeArm
  • Brand NameWaveshare
  • CategoryStm32 Mcu Core Board
  • For Use WithStm32F405Development & Prototyping
  • Onboard McuStm32F405Rgt6
  • FeaturesClock Circuit, Usb Power Management, Boot Mode Selection
  • Demo Board TypeOthers
Product Description
STM32 STM32F405RGT6 MCU core board, full IO expander, JTAG/SWD debug interface
Waveshare Stm32 Core Board Stm32F405Rgt6 Stm32F405 Stm32 Arm Cortex-M3 Stm32 Development Board Kit With Full Ios = Core405R

Overview Core405R is an STM32 MCU core board designed for STM32F405RGT6, supports further expansion. It is ideal for starting application development with STM32F family.
Minimal ready-to-run system, integrates clock circuit, USB control circuit, USB connector, etc. All the I/O ports are accessible on the pin headers JTAG/SWD programming/debugging interface 2.54mm header pitch, allowed to be plugged-in your application board What's On Board
Waveshare Stm32 Core Board Stm32F405Rgt6 Stm32F405 Stm32 Arm Cortex-M3 Stm32 Development Board Kit With Full Ios = Core405R

STM32F405RGT6: the high performance STM32 MCU which features: Core: Cortex-M4 32-bit RISC Operating Frequency: 168MHz, 210 DMIPS/1.25 DMIPS/MHz Operating Voltage: 1.8V-3.6V Package: LQFP64 Memories: 1MB Flash, 192+4kB SRAM MCU communication Interfaces: 3 x SPI, 4 x USART, 2 x UART, 2 x I2S, 3 x I2C, 1 x SDIO, 2 x CAN 1 x USB 2.0 HS/FS device/host/OTG controller with dedicated DMA, on-chip full-speed PHY 1 x USB HS ULPI (external PHY required) AD & DA converters: 3 x AD (12-bit, 1μs, shares 16 channels); 2 x DA (12-bit) Debugging/Programming: supports JTAG/SWD (serial wire debug) interfaces, supports IAP AMS1117-3.3: 3.3V voltage regulator MIC2075-2: onboard USB power management device Power supply switch, powered from 5Vin or USB connection Boot mode selection, for configuring BOOT0 pin Power indicator VBUS LED Reset button 8M crystal 32.768K crystal, for internal RTC with calibration JTAG/SWD interface: for debugging/programming USB connector, used for establishing USB communication between PC and the STM32 development board MCU pins expander, VCC, GND and all the I/O pins are accessible on expansion connectors for further expansion 5Vin pinheader, 5V power supply is required when using USB HOST/OTG USB jumper short the jumper when using USB open the jumper to disconnect from related I/O port VBAT selection jumper short the jumper to use system power supply open the jumper to connect the VBAT to external power, such as battery Photos
Waveshare Stm32 Core Board Stm32F405Rgt6 Stm32F405 Stm32 Arm Cortex-M3 Stm32 Development Board Kit With Full Ios = Core405R

Waveshare Stm32 Core Board Stm32F405Rgt6 Stm32F405 Stm32 Arm Cortex-M3 Stm32 Development Board Kit With Full Ios = Core405R

Waveshare Stm32 Core Board Stm32F405Rgt6 Stm32F405 Stm32 Arm Cortex-M3 Stm32 Development Board Kit With Full Ios = Core405R

Waveshare Stm32 Core Board Stm32F405Rgt6 Stm32F405 Stm32 Arm Cortex-M3 Stm32 Development Board Kit With Full Ios = Core405R

Note:
Mother board or programmer/debugger in the photo is NOT included in the price.
Core405R provides JTAG/SWD debugging interface, yet does NOT integrate any debugging function, a debugger is required. JTAG/SWD Interfaces The figure 1, figure 2 shows the header pinout of JTAG, SWD interface respectively
Figure 1. JTAG Header Pinout


Figure 2. SWD Header Pinout


Development Resources Core405R STM32 development board comes with a User Guide CD including development resources listed as below:
Related software (KEIL etc.) Examples in C Schematic (PDF) Development documentations Dimensions
Waveshare Stm32 Core Board Stm32F405Rgt6 Stm32F405 Stm32 Arm Cortex-M3 Stm32 Development Board Kit With Full Ios = Core405R

Package Contains Core405R x 1 USB type A to Mini-B cable x 1 User guide CD x 1
For buyer
Waveshare Stm32 Core Board Stm32F405Rgt6 Stm32F405 Stm32 Arm Cortex-M3 Stm32 Development Board Kit With Full Ios = Core405R

1

2

3

STM32 STM32F405RGT6 MCU core board, full IO expander, JTAG/SWD debug interface Core405R is an STM32 MCU core board designed for STM32F405RGT6, supports further expansion. It is ideal for starting application development with STM32F family.

Core405R provides JTAG/SWD debugging interface, yet does NOT integrate any debugging function, a debugger is required. The figure 1, figure 2 shows the header pinout of JTAG, SWD interface respectively
Figure 1. JTAG Header Pinout


Figure 2. SWD Header Pinout


Figure 1. JTAG Header Pinout


Figure 2. SWD Header Pinout


Core405R STM32 development board comes with a User Guide CD including development resources listed as below:
Core405R x 1 USB type A to Mini-B cable x 1 User guide CD x 1
Customer Reviews
Related Products