Our Default Shipping Method is : DHL FEDEX UPS
Automatic Water Level Control Valve
Model No: AQTYH20
Thread : 3/4"
Valve Body: ABS Plastic
Rod: ABS Plastic
Total Length: 98mm
This valve is the replacement of the traditional float ballcock,
which can be applied to various systems of high water tanks, pools,
water towers of the industry and civil construction, etc.
Notes and maintenance:
1. This production belongs to the liquid level control valves.
When installed, the float must be vertical. Firstly, the feed line should
be fixed in horizontal plane and then connect the automatic water
level control valve on the water inlet according to the standard.
The main water inlet should be lined with the control valves\' Normal
Diameter. When using, the globe valve should be all open.
If two valves are installed in the same pool, the two valves should
be held in the same horizontal plane. Before installing,
please clean the impurities in the pipes in case of blocking.
2. If the water quality is not good, then the valves need to be maintained
properly. If the users find the time of adding water becomes longer, he can
just upload the water inlet and make it washed.
Its working principle: When the pool or tank water levels fall,
the valve body will sink down and then the forerunner of the control
valve will be opened. As the pipe water pressure affects, the seal face
of control valve will be opened. Finally the water comes out and vice versa.